Product Details
Company Profile

4 Inch Raspberry Pi Zero Touch Screen LCD Display 800*480 HDMI Port RTP Touch Panel

Product Description

4" standard display with 800 * 480 resolution
IPS technology for fast response, wide viewing angle, and true color reproduction
Resistive touch screen supports touch control
Backlight control with adjustable brightness
Standard HDMI interface input, compatible with Raspberry Pi (3rd, 2nd, and 1st generation)
Can function as general-purpose HDMI monitor (requires 800*480 resolution output)
No IO resources needed for display only (Raspberry Pi uses IO resources for touch)
CE and RoHS certified

Product Parameters

Size	4.0 inch
SKU	MPI4008
Display Mode	IPS
Resolution	800*480 dots
Touch	4-wire resistive touch
Dimensions	14313451 mm
Weight	127 g

Hardware Description

4-inch Raspberry Pi LCD display hardware diagram

3.5mm Headphone Jack: Output audio signal
HDMI: Connect main board and LCD display for HDMI transmission
Micro USB: Provides 5V power (optional if using 13*2 Pin Socket)
Backlight adjustment button: Short press changes brightness 10%, long press turns backlight off/on
13*2 Pin Socket: Provides +5V power from Raspberry Pi and transfers touch signals

13*2 Pin Socket Interface Definition

Pin	Name	Description
1,17	3.3V	Power supply +3.3V
2,4	5V	Power supply +5V
3,5,7,8,10,11,12,13,15,16,18,24	NC	No connection
6,9,14,20,25	GND	Ground
19	TP_SI	SPI data input of touch panel
21	TP_SO	SPI data output of touch panel
22	TP_IRQ	Touch panel interrupt signal (low when pressed)
23	TP_SCK	Touch panel SPI clock signal
26	TP_CS	Touch panel select signal (low level selects touch panel)

Dimensions

Connect with Raspberry Pi

Connect the LCD 13*2 Pin socket to Raspberry Pi as shown:
Connect the LCD and Raspberry Pi with the HDMI adapter:

How to Use with Raspbian

Step 1: Install Raspbian Official Image

Download from official website: https://www.raspberrypi.org/downloads/
Format Micro SD card using SDFormatter
Burn the official image to Micro SD card using Win32DiskImager

Step 2: Install Driver

Method 1: Online Installation (Requires Internet)

Log onto Raspberry Pi via Putty SSH (User: pi; Password: raspberry)
Execute the following command (you can click the right mouse button to paste after copied in Putty)
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./MPI4008-show
Wait for a moment after executing, you can use the LCD.

Method 2: Offline Installation

Download or copy "lcd-show.tar.gz" driver to Raspberry Pi system root directory: http://www.lcdwiki.com/res/RaspDriver/LCD-show.tar.gz
Unzip and extract drive files as the following command:
cd /boot
sudo tar zxvf LCD-show.tar.gz
cd LCD-show/
sudo ./MPI4008-show
Wait for a moment after executing, you can use the LCD

How to Use with Ubuntu, Kali and RetroPie

Step 1: Install Official Image

Download from official websites:
- Ubuntu: https://ubuntu-mate.org/raspberry-pi/
- Kali: https://www.offensive-security.com/kali-linux-arm-images/
- RetroPie: https://retropie.org.uk/download/
Format Micro SD card using SDFormatter
Burn the official image to Micro SD card using Win32DiskImager

Step 2: Install Driver (Offline Only)

Due to system differences, Ubuntu, Kali, RetroPie are temporarily unable to install drivers online. Only the offline installation method can be used.

1) Download the corresponding version of driver "LCD-show.tar.gz" from the website to the root directory of Micro SD card of raspberry PI system(Note: if the version does not match, the LCD may not display properly):

http://www.lcdwiki.com/4inch_HDMI_Display-C#Download_Resources

(After the completion of the recommended step 1, copy the driver directly into the Micro SD card root directory)

2) Unzip and install the driver using the following command:

cd /boot

sudo tar zxvf LCD-show.tar.gz

cd LCD-show/

sudo ./MPI4008-show

3) After the command is executed, the system will restart and the LCD will work normally

Quick Start with Pre-installed Driver Image

Download driver image from: http://www.lcdwiki.com/4inch_HDMI_Display-C#Download_Resources
Format Micro SD card using SDFormatter
Burn the image to Micro SD card using Win32DiskImager
Insert card, connect LCD, and start Raspberry Pi

How to Use as PC Monitor

Connect computer HDMI output to LCD HDMI interface
Power via Micro USB interface
For testing, use as only display (disconnect other monitors)
Note: Touch function not available when used as PC monitor

Product Tags:

4 Inch Raspberry Pi Zero Touch Screen

Raspberry Pi Zero Touch Screen LCD Display

HDMI Port RTP Touch Panel

4 Inch Raspberry Pi Zero Touch Screen LCD Display 800*480 HDMI Port RTP Touch Panel

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen YZY Technology Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	HDMI LCD Display
Type:	Raspberry pi lcd display
Display Size:	4 inch LCD display
Supplier Type:	Factory
size:	4inch display
Outline Dimension:	98.60*58.05
WEIGHT(LCM):	126g
Video Input:	HDMI
Model Number:	YQ84-4
Certification:	CE/ROHS
MOQ:	100
Payment Terms:	T/T
Supply Ability:	50K/Month
Delivery Time:	30-45days
Packaging Details:	1006550mm/126g
Place of Origin:	China
Brand Name:	YZY
Price:	$16-18.5/pieces

LCD Display	Touch Screen	AD board	Industrial Monitor

Size range : 0.96-23.8 inch Various shapes are available: Rectangular/Square/Circular/Bar LCD screen Can be customized according to customer requirements	Resistive touch screen Capacitive touch screen Can be customized according to customer requirements	HDMI board Android Board	7-inch to 21.5-inch industrial embedded display screens
HDMI Monitor	Eink Module	ESP32 module	Commercial display

Size range: 3.5 - 23.8 inch Can be customized according to customer requirements	Size range: 0.94 - 13.3 inch Monochrome/Multicolor Electronic Paper	Size range: 2.8-7 inch	Size range: 16.4-88 inch Android A40 motherboard (1 + 32G) Can be customized according to customer requirements

	Product diversification	Comprehensive range of products, suitable for various scenarios
	Long product lifespan
	Long-term supply guarantee	Typically for 5 years or more
	Customization is flexible	Small MOQ, low mold-making cost
	Commitment to Quality and Reliability	Strict process management Multiple levels of testing and aging tests to ensure quality
	Professional and dedicated service	Quick response; Professional technical support； Listen to customer feedback