Taper Roller Bearing

Brand Name:HongCe

Model Number:HT-I04

Place of Origin:China

IEC61032 Test Finger Probe Test Probe D 35mm Sphere Diameter 1mm Wire Diameter Application:This rod probe is intended to verify the protection of persons against access to hazardous live parts or hazardous mechanical parts. It is also used to verify the ...

Brand Name:HongCe

Model Number:HT-I07

Place of Origin:China

IEC60598 Test Finger Probe Rigid Test Probe length 80mm* Ф12mm​ Standard description (IEC60598): 4.13.3 A straight unjointed test finger is used, with the same dimensions as the standard test finger specified in IEC 60529. The finger is pressed against...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I20, HT-I21

IEC60884-1 Figure 9 and Figure 10 Test Probe With Force Introduction: These two test probe separately confirm to the IEC60884-1 figure 9 and figure 10.The HT-I20 test probe with 20N force is used to test whether the live parts inside can be touched. The HT...

Brand Name:HongCe

Model Number:HT-I23

Place of Origin:China

IEC 62368-1 Figure V.3 Test Finger Probe Telecom Test Probe With IEC60950 Figure 2C Standard description(IEC 62151 4.2.2.1): 4.2.2.1 Accessibility The equipment shall be so constructed that in USER ACCESS AREAS there is adequate protection against contact...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I22

IEC 60335 Figure 7 Test Finger Nail Product information: The test finger nail complies with the IEC 60335 figure 7 standard requirements. It is applicable for the non-removable components which are used for electric shocking water or touching the movement...

Brand Name:HongCe

Model Number:HT-I25

Place of Origin:China

IEC60335-2-24 Clause 21.102 Test Finger Probe 75mm±5mm Spheroid Probe Test Standard:IEC60335-2-24 Clause 21.102 and IEC60335-2-30 Clause 11.8. Application:It is used for protection test on the lamps of household appliances. Lamps shall be protected against...

Brand Name:HongCe

Model Number:HT-I02B

Place of Origin:China

IEC60335-2-14 Large Baffle Test Finger Probe B With Baffle Diameter 125 mm Standard: IEC60335-2-14 IEC 61032 figure 2, IEC60950 figure 2A, IEC60884, UL507, and UL1278 figure 8.4. Application: This probe is intended to verify the basic protection against ...

Brand Name:HongCe

Model Number:HT-I36

Place of Origin:China

EN 50636 Figure 1 Test Finger Probe Young Adult Arm Probe Nylon Handle Stainless Steel Probe Standard:EN 50636-2-100 figure 1 and IEC 50636-2. Application:It is used to simulate the young adult to test whether the hazardous parts can be touched. Test ...

Brand Name:HongCe

Model Number:HT-I02B

Place of Origin:China

IEC60335-2-14 Test Finger Probe B With 125mm Diameter Circular Stop Face Standard description: For blenders, detachable parts, except lids, are not removed. The test is carried out with a test probe similar to that of test probe B of IEC 61032 but having...

Brand Name:HongCe

Model Number:HT-I02T

Place of Origin:China

IEC 61032 Test Finger Probe Force Of 75 N , Standard Test Finger With Force Product information: This is a precision test finger made in accordance with many standards like IEC 61032 figure 2, IEC60950 figure 2A,IEC60884,IEC60335,UL507,and UL1278 figure...

Brand Name:HongCe

Model Number:HT-E01

Place of Origin:China

EN 50636-2-100 Figure 2 Adult Arm Probe EN 13683-2003 Figure 5 Product information: The adult arm probe conforms to EN 50636-2-100 figure 2 and EN13683-2003: 5.2.1.3 fig 5. It is used to simulate the adult to test whether the hazardous parts can be touched...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I99

Test Finger Probe , IEC 60335 Testing Probe Kit With Carrying Case Product information: 1.IEC Jointed Finger Probe 2.50mm Impact Test Ball 3.Test Pin Probe: short 4.Rigid Finger Probe 5.Ball Pressure Tester 6.Telecom Test Probe Meets Requirements for ...

Brand Name:HongCe

Model Number:HT-I36

Place of Origin:China

EN 50636 Young Adult Arm Finger Probe Above 14 Years Old Joint Test Probe The young adult joint arm probe conforms to EN 50636-2-100 figure 1 and IEC 50636-2. It is used to simulate the young adult who are older than14 years to test whether the hazardous...

Brand Name:HongCe

Model Number:WR-1

Place of Origin:China

BS EN 13126 - 5 Figure A . 2 Jointed Test Finger For Windows Restrictor Safety Testing Product information: Test gauges for Windows Restrictor safety testing. 2 pieces a set, gauge A 100mm, gauge B 89mm. Conforms to BS EN 13126-5 (Figure A.2). Material...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I02

Test Finger Probe B Product information: This is a precision test finger made in accordance with many standards like IEC 61032 figure 2, IEC60950 figure 2A,IEC60884,IEC60335,UL507,and UL1278 figure 8.4. This probe is intended to verify the basic protection...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I33

IEC60335-2-14 Stainless Steel Test Probe Product information: The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. It conforms to the IEC60335-2-14 requirement. Appliance is checked by applying a ...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I32

IEC60335-2-11 Figure 104 Surface Temperature Probe Product information: This probe conforms to the IEC60335-2-11 figure 104 and IEC60335-2-6-2002 figure 104 standard requirements. It is mainly used to measure the temperature rise on the front surface of ...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I34

Scratched Pin Electric Safety Testing Probes Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21. Test method: make sure the ...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I35

Stainless Steel Thrust Rod Product information: Thrust rod is according to the standards of IEC60884.1-2002 and IEC60950.1-2005 to manufacture. Test method: Touch the specimen by the thrust rod terminal, and then push the handle to the scale mark keeping ...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I33

IEC60335-2-14 Stainless Steel Test Probe Product information: The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. It conforms to the IEC60335-2-14 requirement. Appliance is checked by applying a ...