Place of Origin:USA

Brand Name:3M

Model Number:CA40H

3M CA40H High-Viscosity Cyanoacrylate for Aluminum/EPDM Industrial Bonding Basic Properties​ 3M CA40H is a single-component cyanoacrylate adhesive with 400-600 cP viscosity (higher than CA40) and 5-40 sec cure time. Designed for bonding challenging ...

Place of Origin:Germany

Brand Name:Kluberplex

Model Number:BEM 41-141

Kluberplex BEM 41-141 High-Load Bearing Grease for Wind Turbines Basic Properties​ Kluberplex BEM 41-141 is a lithium-soap-thickened synthetic hydrocarbon grease with mineral base oil. Rated NLGI 1, operating from -40°C to 150°C, engineered for highly ...

Place of Origin:USA

Brand Name:3M

Model Number:Super 77

3M Super 77 Spray Adhesive - Multi-Substrate Bonding of Lightweight Materials Product Simple Attributes 3M Super 77 Multipurpose Spray Adhesive is a high-tack synthetic elastomer-based aerosol with 25% solids content and density 0.72 kg/L (6 lb/gal). ...

Place of Origin:USA

Brand Name:3m

Model Number:Dp810

3M Scotch-Weld DP810 Low-Odour Universal Structural Bonding Adhesive Basic Properties​ 3M Scotch-Weld DP810 is a two-part low-odour acrylic adhesive with Green Base and White Accelerator. It features a 1:1 mix ratio, 10-minute worklife, and achieves ...

Place of Origin:USA

Brand Name:3M

Model Number:Scotch-Weld DP810NS

3M Scotch-Weld DP810NS Acrylic Adhesive - Low-Odor Structural Bonding Product Simple Attributes 3M Scotch-Weld DP810NS Low Odor Acrylic Adhesive is a two-part 1:1 ratio structural adhesive with blue/green base and white accelerator. Viscosity 90,000–100,...

Place of Origin:USA

Brand Name:3M

Model Number:3M CA40H

3M CA40H High-Strength Instant Adhesive: Versatile Bonding Solution Basic Product Attributes M CA40H is a high-strength cyanoacrylate quick drying adhesive (instant adhesive) produced by 3M Company in the United States. It has a medium viscosity (400-600cP...

Place of Origin:USA

Brand Name:3M

Model Number:DP125

3M Scotch Weld DP125 structural adhesive, fast curing epoxy adhesive Basic Properties​ 3M Scotch-Weld DP125 is a two-part epoxy adhesive available in Translucent and Grey variants. It features a 1:1 mix ratio, 25-minute worklife, and is designed for rapid-...

Place of Origin:USA

Brand Name:3M

Model Number:3M TL77

3M Scotch-Weld TL77 Threadlocker High-Strength Permanent Adhesive for Heavy-Duty Fasteners Basic Product Attributes​ 3M Scotch Weld TL77 is a red high-strength permanent thread locking adhesive designed specifically for rough thread fasteners with a ...

Place of Origin:USA

Brand Name:3M

Model Number:DP760

3M Scotch-Weld DP760 High-Temp-Resistant Non-Sag Epoxy Adhesive Basic Properties​ 3M Scotch-Weld DP760 is a two-part toughened epoxy adhesive supplied as a white paste base and white paste accelerator. It features a non-sag consistency, a mix ratio of 100:...

Place of Origin:USA

Brand Name:3M

Model Number:DP8005

3M Scotch Weld DP8005 Low Surface Energy Plastic Structure Adhesive Basic Properties​ 3M Scotch-Weld DP8005 is a two-part acrylic structural adhesive available in Translucent and Black variants. It features a 10:1 mix ratio by volume, 2-2.5 minute worklife...

Place of Origin:Guangdong, China

Brand Name:PUCONS

Model Number:P-9250/P-9255

PUCONS Polymethylphenylsiloxane High-Temp Thermal Fluid 25-500 cSt Product Properties ​Property​ ​Specification​ ​Test Method​ ​Chemical Name​ Polymethylphenylsiloxane IUPAC Nomenclature ​Viscosity Range​ 25–500 cSt (at 25°C) ASTM D445 ​Appearance​ ...

Place of Origin:Guangdong, China

Brand Name:PUCONS

Model Number:P-9099

Hydrogen-Rich Silicone Oil 1.6% Hydrophobic Treatment/Release Agent PMHS 20-25 cSt Product Properties Property Value Product Name Hydrogen-Rich Silicone Oil 1.6% Hydrophobic Appearance Clear, colorless liquid Hydrogen Content 1.6% Viscosity (at 25°C) Data...

Place of Origin:Guangdong, China

Brand Name:PUCONS

Model Number:P-3400

PUCONS 60% Solid Content Hydrogen Silicone Oil Emulsion for Construction Product Properties Property​ ​Specification​ ​Appearance​ White Milky Liquid ​Solid Content​ 60% ± 1% ​Viscosity (25°C)​​ Customizable (50–1000 cSt) ​pH Value (25°C)​​ 5.5–8.5 ​...

Place of Origin:Britain

Brand Name:Electrolube

Model Number:Electrolube FTHC

Electrolube FTHC High-Performance Thermal Conductive Paste for Electronics Cooling​ Basic Properties Electrolube FTHC is a high-thermal-conductivity paste designed for efficient heat dissipation in electronic components. It features a silicone-based ...

Place of Origin:USA

Product Properties Property Value Unit ​Appearance​ Flowable paste - ​Cure Mechanism​ Moisture-curing - ​Viscosity​ High (Flowable type) - ​Volume Resistivity​ 2.0 × 10¹⁵ Ω·cm ​Dielectric Strength 23 kV/mm ​Dielectric Constant 2.9 (60Hz) - ​Dissipation ...

Place of Origin:USA

Basic Properties Property Condition/Unit Value ​Uncured Properties​ Appearance – Non-flowable paste Tack-free time 23°C, min 10 ​Cured Properties​ 7 days @ 23°C, 50% RH Density g/cm³ 1.04 Hardness Type A 28 Tensile Strength MPa 1.9 Elongation % 380 ...

Place of Origin:USA

Brand Name:Momentive

Model Number:Rtv11

Basic Properties Property Value Color White Viscosity (Uncured) 11,000 cps Specific Gravity 1.19 Work Time (0.5% DBT @25°C) 1.5 hours Cure Time (0.5% DBT @25°C) 24 hours Hardness (Shore A) 41 Tensile Strength 36 kg/cm² (510 psi) Elongation 190% Dielectric ...

Place of Origin:USA

Brand Name:Momentive

Model Number:Tig2000

Basic Properties ​Property​ ​Value​ Appearance Light blue paste Specific Gravity 2.8 Viscosity @23°C (Pa·s) 110 Thermal Conductivity (W/m·K) 2.0 Dielectric Strength (kV/0.25mm) 5.0 Volatile Siloxane (ppm) ≤50 Operating Temperature Range -40°C to +150°C ...

Place of Origin:USA

Basic Properties Property Unit Value Test Condition Viscosity mPa·s 550 23°C Tack-Free Time min 5 23°C, 50% RH, 100μm thickness Cure Time (Room Temp) min 30 23°C, 50% RH, 100μm thickness Cure Time (Oven) min 2 60°C, 15% RH, 100μm thickness Hardness Shore...

Place of Origin:Japan

Brand Name:Cemedine

Model Number:Cemedine Ep-160

Product Properties Property Value Type One-Part Heat Curing Epoxy Adhesive Base Resin Epoxy resin Appearance Light brown Viscosity (23 °C) 100 Pa*s Density 1.16 g/cm³ Standard Curing Conditions 110℃*60min or 120℃*30min Tensile Shear Strength 16.8 MPa T-...