Brand Name:HongCe

Model Number:HT-I03

Place of Origin:China

IEC 60065 Test Probe C 2.5mm Diameter 100mm Length for HAZARDOUS LIVE TEST IEC60065-2014 Clause 9.1 .5 Pre-set controls If a hole giving access to pre-set controls is marked as such on the enclosure or in the instruction for use, and the setting of this ...

Brand Name:HongCe

Model Number:HT-I04

Place of Origin:China

IEC 60065 Test Probe D 1mm Diameter 100mm Length for HAZARDOUS LIVE TEST IEC60065 Clause 9.1 .4 TERMINALS The use of a single-pole plug or a bare wire to make connection with a contact of a TERMINAL for earth or antenna or for audio, video or associated ...

Brand Name:HongCe

Model Number:HT-I06A

Place of Origin:China

ISO 20653 Test Finger Probe Test Probe 2 - 12.5mm steel ball Tolerance 0.05mm Standard:ISO 20653, IEC61032 figure 6 probe 2,IEC60529 of IP2. Application:It is intended to verify the degree of protection of enclosures against ingress of solid foreign ...

Brand Name:HongCe

Model Number:HT-U01

Place of Origin:China

UL507 Fig 9.2 Articulate Probe With Web Stop Test Finger Probe for Accessibility of Live Parts Description in UL507 Clause 9.1~9.3: 9 Accessibility of Live Parts 9.1 General 9.1.1 To reduce the risk of unintentional contact that involves a risk of electric...

Brand Name:HongCe

Model Number:HT-U03

Place of Origin:China

UL1278 UL507 Probe for Film-coated Wire 19.1 mm to Verify Accessibility of Live Parts​ Description in UL1278 Clause 8.1~8.5: 8 Accessibility of Live Parts 8.1 An electrical part of a heater shall be so located or enclosed that protection against ...

Brand Name:HongCe

Model Number:HT-U02

Place of Origin:China

UL507 Probe for Film-coated Wire ELECTRIC FANS TEST 101.6mm length 19.05mm Diameter Description in UL507 Clause 9.1~9.3: 9 Accessibility of Live Parts 9.1 General 9.1.1 To reduce the risk of unintentional contact that involves a risk of electric ...

Brand Name:HongCe

Model Number:HT-I02

Place of Origin:China

IEC62368 Jointed Test Probe / Finger Length 80mm Diameter 12mm​ Standard: Conforms to IEC 62368-1:2018 clause 5.3.2, T.3 and Figure V.2, IEC61032 figure 2 test probe B,IEC950 Figure2A, IEC884, IEC335, UL507, EN60529 figure 1, UL1278 figure 8.4 and etc. ...

Brand Name:HongCe

Model Number:HT-I33

Place of Origin:China

IEC60335-2-14 Stainless Steel Test Finger Probe Diameter 40mm For Hand Held Blender Product information: Hand-held blenders shall incorporate a biased-off switch, its actuating member being positioned in a recess or otherwise guarded to prevent accidental ...

Brand Name:HongCe

Model Number:HT-U14

Place of Origin:China

IEC 62368-1 Figure V4 Test Finger Probe Wedge Probe For Testing Document Shredders Standard description(IEC 62368-1 8.5.4.2.4): The media destruction device is tested with the wedge probe of Figure V.4 applied in any direction relative to the opening: −...

Brand Name:HongCe

Model Number:HT-I04

Place of Origin:China

IEC61032 Test Finger Probe Test Probe D 35mm Sphere Diameter 1mm Wire Diameter Application:This rod probe is intended to verify the protection of persons against access to hazardous live parts or hazardous mechanical parts. It is also used to verify the ...

Brand Name:HongCe

Model Number:HT-I07

Place of Origin:China

IEC60598 Test Finger Probe Rigid Test Probe length 80mm* Ф12mm​ Standard description (IEC60598): 4.13.3 A straight unjointed test finger is used, with the same dimensions as the standard test finger specified in IEC 60529. The finger is pressed against...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I20, HT-I21

IEC60884-1 Figure 9 and Figure 10 Test Probe With Force Introduction: These two test probe separately confirm to the IEC60884-1 figure 9 and figure 10.The HT-I20 test probe with 20N force is used to test whether the live parts inside can be touched. The HT...

Brand Name:HongCe

Model Number:HT-I23

Place of Origin:China

IEC 62368-1 Figure V.3 Test Finger Probe Telecom Test Probe With IEC60950 Figure 2C Standard description(IEC 62151 4.2.2.1): 4.2.2.1 Accessibility The equipment shall be so constructed that in USER ACCESS AREAS there is adequate protection against contact...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I22

IEC 60335 Figure 7 Test Finger Nail Product information: The test finger nail complies with the IEC 60335 figure 7 standard requirements. It is applicable for the non-removable components which are used for electric shocking water or touching the movement...

Brand Name:HongCe

Model Number:HT-I25

Place of Origin:China

IEC60335-2-24 Clause 21.102 Test Finger Probe 75mm±5mm Spheroid Probe Test Standard:IEC60335-2-24 Clause 21.102 and IEC60335-2-30 Clause 11.8. Application:It is used for protection test on the lamps of household appliances. Lamps shall be protected against...

Brand Name:HongCe

Model Number:HT-I02B

Place of Origin:China

IEC60335-2-14 Large Baffle Test Finger Probe B With Baffle Diameter 125 mm Standard: IEC60335-2-14 IEC 61032 figure 2, IEC60950 figure 2A, IEC60884, UL507, and UL1278 figure 8.4. Application: This probe is intended to verify the basic protection against ...

Brand Name:HongCe

Model Number:HT-I36

Place of Origin:China

EN 50636 Figure 1 Test Finger Probe Young Adult Arm Probe Nylon Handle Stainless Steel Probe Standard:EN 50636-2-100 figure 1 and IEC 50636-2. Application:It is used to simulate the young adult to test whether the hazardous parts can be touched. Test ...

Brand Name:HongCe

Model Number:HT-I02B

Place of Origin:China

IEC60335-2-14 Test Finger Probe B With 125mm Diameter Circular Stop Face Standard description: For blenders, detachable parts, except lids, are not removed. The test is carried out with a test probe similar to that of test probe B of IEC 61032 but having...

Brand Name:HongCe

Model Number:HT-I02T

Place of Origin:China

IEC 61032 Test Finger Probe Force Of 75 N , Standard Test Finger With Force Product information: This is a precision test finger made in accordance with many standards like IEC 61032 figure 2, IEC60950 figure 2A,IEC60884,IEC60335,UL507,and UL1278 figure...

Brand Name:HongCe

Model Number:HT-E01

Place of Origin:China

EN 50636-2-100 Figure 2 Adult Arm Probe EN 13683-2003 Figure 5 Product information: The adult arm probe conforms to EN 50636-2-100 figure 2 and EN13683-2003: 5.2.1.3 fig 5. It is used to simulate the adult to test whether the hazardous parts can be touched...