ul 817 cable bending test machine

Model Number:LR-A006

Place of Origin:China

Brand Name:Lonroy

UL 817 Wire Swing Bending Machine Cable Bending Test Machine Plastic Test UL 817 Wire Swing Bending Machine Cable Bending Test Machine 1.Use The test machine is in accordance with UL817 and other relevant standards "general safety requirements for software components and power supply cord".Applicable for bending test of power cord and DC line by related manufacturer and quality inspection department. 2.Specification Test...

Brand Name:Infinity Machine

Model Number:RS-8116-6A

Place of Origin:Made in China

... conductor, flat cable and signal line, etc. The test method is as follows: Firstly, clamp one end of the wire rod and fasten it to the rotation clamp. Then have it make a horizontal rotation with hanging load to evaluate whether ...

Place of Origin:CHINA

Brand Name:YOUBI

Model Number:UP-4040

... Wire Swing Cable Bending Test Machine for Electrical Wire Product Overview Wire bending and swing testing machine, also known as wire bending and swing testing machine, is an abbreviation for swing testing machine. This testing machine complies with the ...

Brand Name:Sinuo

Model Number:SN1112R

Place of Origin:China

... in robot system" Specimen and limitations: Industrial robot cables. Test purpose: Used to test the bending resistance of the power cord of industrial robot cables when entering the joint. Test principle: Using PLC control and servo motor drive, the

Brand Name:YUYANG

Model Number:YYW002

Place of Origin:China

...Cable Flex Test Equipment 6 Station 10~60 Times/Min Description: UL817 IEC60335 cable bending testing machine can test six cables or cord sfitted with plugs simultaneously. This improves testing capacity.IEC60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test...

Brand Name:SKYLINE

Model Number:SL-C110

Place of Origin:China

Machine Introduction This equipment is suitable for testing the ability of optical cable to withstand repeated bending, by applying repeated bending force, for qualified optical cable requires that the optical fiber is not broken, the attenuation change of the optical fiber does not exceed the value specified in the optical cable product standard, and the optical cable sheath does not crack. Test...

Brand Name:CHENGFENG

Model Number:CF8464

Place of Origin:China

It is applicable to the testing of the bending performance of mining cables and complies with the requirements of Article 5.8.8 (Appendix D) of GB12972.1. The radius of the sample bending fixture: R150±10mm, 200±10mm, and R250±10mm can be replaced. Test ...

Brand Name:AI

Model Number:AIC6223A

Place of Origin:China

...Bending Test Machine is suitable for repeated U-shaped bending fatigue testing of high flexible cables such as TUV, VDE, UL, etc., in applications that require continuous bending and high-speed movement, such as internal wiring of machines, high-speed drag chain system cables, connecting cables of machine moving parts, internal wiring of machines, as well as repeated bending fatigue testing...

Brand Name:JIEDONG

Model Number:JD-3004

Place of Origin:Guangdong, China

...) JD-3004 product description: Applicable to the relevant manufacturers and quality inspection departments to bend (bend) the cable test. The test method is to fix the cable on the fixture. When the test is performed, the clamp swings left and right.

Brand Name:YUYANG

Model Number:YY616

Place of Origin:China

...Cable Bending Testing Equipment, 6 Station CRIA 0003.2 Wire Testing Equipment Application: The robot cable bending testing equipment conforms to TUV, VDE and UL. It can be used to test bending of the robot cable, flexible cable, bending flexible cable, drag chain cable, chain bend and high flexible cable. The machine is a six-station structure, which is mainly used for repeated bending test...

Brand Name:DAXIAN

Model Number:DX8463

Place of Origin:China

... strength of the conductor wire. The plug blade is fixed in the socket, and the tail end of the wire is connected to the hammer bar to test the pull. After that, weights were hoisted to perform swing tests and current tests. Comply with the standards: In

Brand Name:Herrman

Model Number:GWQ-90

Place of Origin:China

...cable repeated bending testing machine optic fiber cable repeat beading detector DESCRIPTION The equipment is used to test optical cable resistance repeated bending properties. By applying repeated bending force, for the qualified optical cable, no fiber fracture, fiber attenuation values meet standard, no optic cable jacket cracking. The equipment adopts the man-machine interface and PLC control, TFT true color screen display test

Brand Name:ZL

Model Number:ZL-1018

Place of Origin:China

... of bearing deformation of metal wires and other wire ropes with diameters of φ6~φ20mm during reversing. The test can reveal surface defects of wire during the testing process. ZL-1018 Wire Torsion Testing Machine.pdf Technical Parameters Range of

Brand Name:KingPo

Model Number:KP-8820A

Place of Origin:China

...Bending Test Machine / Large cable Diameter Determination Machine 90°bending test is is carried out in the process as follows in which to test(Bending of JIS C3005 4.27.4 Section).This test is able to determin about large cable diameter of cable outer also. Mount a sample of about 1m taked from the finished product,which is fixed one end to to 90°bending test...

Place of Origin:China

Brand Name:KeRang

...Bending Test Machine HDX1307 Standard:IEC60811-1-4 clause 8.1 and 8.2, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general application-Test at low temperature. Application:This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm. Test sample:Cables...

Brand Name:LIYI

Place of Origin:Guangdong, China

...Bending Test Machine Cable Plug Bending Testing Machine / Wire Bend Test Machine The Liyi Plug Wire Reverse Bending Test Machine complies with UL817 and other relevant standards for general safety requirements of software components and power supply cords. Designed for bending tests of power cords and DC lines, this machine is ideal for manufacturers and quality inspection departments. Specifications Test...

Brand Name:MIYU

Model Number:MY-XC-360

Place of Origin:China

360-degress, Wire/Cable Bending Tester (MY-XC-360), with competitive price, both OEM and ODM available from us Technical Specification 1. Test standard: clip, flat angle 2. Test station: 6 3. Test speed: 5-60 times / minute adjustable 4. Test times: ...

Place of Origin:China

Brand Name:HongCe

Model Number:CBT-1

... wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel shall be between 4

Brand Name:Kinte

Model Number:WH-8801B

Place of Origin:Guangdong,China (Mainland)

... of electric wire. Test method is to sample fixed in the fixture, and add a certain load, test fixture swing around, after a certain number of times, view the break rate; or to not power, see the total number of swing. The machine can automatically count,