tungsten steel tapered button bits

Brand Name:MIROC

Model Number:7 Degree 34mm

Place of Origin:CHINA

... bits are made with high quality of raw material through special heat treatment, various type suitable for afferent work site. The diameter of tapered bits is from 28mm to 43mm with 4 6 7 11 12 taper degree. The deliver capacity are very strong and can

Brand Name:MTH

Model Number:Tapered bit

Place of Origin:China

... engineering. Its primary function is to drill holes in rocks during drilling and blasting operations, usually in tandem with handheld or mechanical rock drills. The tapered button bit derives its name from its

Brand Name:SUVEC

Model Number:Threaded Button Bit

Place of Origin:China

..., FurukawaHCR 1200, Tamrock, and Ingesoll Rand ECM660, the products are widely used in bench and production drilling, extensional drilling. Thread button drill bits are

Place of Origin:China

Brand Name:Jinquan

Model Number:Threaded & Tapered

Rock Drilling Tools Tapered Button Bits: Taper Degree: 6°, 7°, 11°, 12° Diameter: 30mm, 32mm, 33mm, 34mm, 36mm, 38mm, 40mm, 41mm, 42mm Buttons: 4, 5, 6, 7, 8 Flushing Water Hole Nos.: 1, 2, 3 Skirt: Short, Long

Brand Name:New Diamond

Model Number:COP66

Place of Origin:Hunan, China (Mainland)

... similar materials, which greatly extends the life of the carbide bits; 2. High drilling efficiency: the high grade hardness of the carbides can always stay sharp, which could increase the drilling speeds too; 3. New Diamond's bits are widely used in

Brand Name:SOLLROC

Model Number:Tapered Button Bits

Place of Origin:China

About us: We are a leading manufacturer of rock drilling tools, like DTH hammers and bits, DTH drill pipes, RC hammers and bit top hammer button bits, coupling, cross bits, drill rods located in Changsha, Hunan, China.We have rich experience in this field...

Brand Name:MING

Model Number:MZ0738-11

Place of Origin:CHINA

...Tapered Button Bits With 11 Degree Taper For Underground Coal Mining Equipment Product category: DTH taper drill bit Matched connection: 11 degree taper Diameter: 38mm KINGDRILLING DTH taper drill bit description: A tapered drill bit is a drill bit used for rock or geological exploration drilling. They are usually made of high-speed steel or tungsten steel and have a tapered design for tapered drill pipes. Tapered...

Brand Name:MIROC by KSQ

Model Number:BL732-12D-22

Place of Origin:China (Mainland)

...Tapered Tungsten Carbide Mining Rock Spherical Drill Bits Taper Button Drill Mining Bit of 32mm diameter According to the tungsten carbide insert, button bits can be divided into types of hemispherical, conical and parabolic button, etc. Button bits with hemispherical button is for high bearing capacity and abrasive resistance while conical button and parabolic button...

Brand Name:OED/OEM

Model Number:7 degree/11°/12°/4°

Place of Origin:China

Tapered Drill Bit 12 degree 11 degree Button Bit Hex 22 Hex 25 For Hammer Rock Drilling Feature Of The Taper Button Bit: (1)Taper Angle: 4°,4°46″,6°,7°,11°,12° (2)Models: Chisel/Cross/Button Bit (3)Dia:20-45 Mm (4)Button Bit Shape: Spherical/Parabolic (5)Socket Inside Dia:15/19/22/25mm Product Name: Rock Drill Tool Tungsten Carbide Taper Button Bit Types Tapered Chisel Bits, Tapered Cross Bits, Tapered Button Bits Application:: Tapered Drill Bits

Brand Name:JCDRILL

Model Number:36mm

Place of Origin:China

... bit as long hole bit to use taper match with jack hammer bit with rod to be used for air leg or hand held jack hammer driller in quarrying, and mining. Tapered Quarry Button Rock Drill Bits 40mm 41mm 45mm With higher strength of tungsten carbide as the

Brand Name:Jinxing

Model Number:Buttons High Quality Tungsten Carbide Tapered Drill Bits

Place of Origin:China

Buttons High Quality Tungsten Carbide Tapered Drill Bits Product information: -Name:Buttons High Quality Tungsten Carbide Tapered Drill Bits -Button No.: 4,5,6,7,8. -Brand Name: JX -Diameter:30/32/34/36/38/40/42/50/53mm -Material : Tungsten Carbide. -Taper...

Brand Name:QIDELI

Model Number:H22/H25

Place of Origin:PUTIAN FUJIAN CHINA

...buttons taper drill bits cold pressing and hot set type button bits PRODUCT INTRODUCTION Tapered Button Bits is suitable for mining,quarring,tunneling and so on. It is widely used for gound quarring and underground drilling. 1. Our button bits is made with supper quality carbide and aloy steel. 2. After our mature heat treatment process, the performance of the product has reached the best state.Our bits...

Brand Name:Kinglong drilling

Model Number:Tapered Button Bits

Place of Origin:China

...bits size 32mm 34mm 7 Degree tapered button bits for mining Tapered Quarry Button Rock Drill Bits 40mm 41mm 45mm With higher strength of tungsten carbide as the body, the bit has good anti-erosive and the increased the toughness. With premium PDC cutters, the bit has enhanced reliability and drilling efficiency. Suitable formation:Medium hard to hard, solid hard rock formations We manufactuer various tapered button bits

Brand Name:Super Diamond

Place of Origin:China

Tapered Button Bits Rock Drilling Tools Fast Penetration For Blast Hole Drilling Product name thread button bits rock button bits Material Alloy steel and tungsten carbide Color depend on customers' requirement Thread R25,R28,R32,R38,T38,T45,T51,T60,ST68 Diameter 34mm-127mm Button bit shape Ballistic and Spherical Face shape Drop - center shape and Flat shape Application Rock quarry, granite, limestone, basalt Button bit...

Place of Origin:China

Brand Name:EST

Model Number:all types

...buttons hot pressed on bits bodies, Tapered Button Bits have a very good drilling performance and long life time. Different diameters and taper degrees are available to suit different applications in mining, quarrying etc. We can supply long skirt and short skirt Tapered Button Bits. Comparing with tapered chisel bits and tapered cross bits, button bits...

Brand Name:HZJX

Model Number:32 mm 34 mm 36 mm 38 mm 41 mm

Place of Origin:China

... description of Rock Drilling Bits Materials and produce process details : Materials- we use 45CrNiMoVA and YK05 Tungsten carbide to produce our taper drill bit , both are famous materials for drill bit produce in the world . Advanced technology---We