plastic materials melt flow rate analyzer

Brand Name:JINHAIHU

Model Number:XNR-400AC

Place of Origin:BEIJING, CHINA

... thermoplastics' melt flow rate under specified conditions. Melt flow rate (melt index) of thermoplastics is the melt mass/volume flowing through a standard capillary die every 10 min, denoted as MFR, differing from molten-state viscosity. Widely used in

Brand Name:JINHAIHU

Model Number:XNR-400C

Place of Origin:BEIJING, CHINA

Melt Flow Index Tester for Plastic Materials with Dual Temperature Control and Automatic Cutting Control for Plastic Materials Application: Melt Flow Index Tester for Plastic Materials with Dual Temperature Control and Automatic Cutting Control for Plastic Materials can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate

Brand Name:LONROY

Place of Origin:Guangdong, China

...polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Standard GB/T3682-2018,ISO1133-2011,

Brand Name:Kinte

Model Number:WH-8991

Place of Origin:Guangdong,China (Mainland)

... control instrument, temperature accuracy and stability. Programmed setting, timing control, automatic cutting material. The melt flow rate and the melt density of various plastics such as polyethylene, polypropylene, polystyrene, polyamide, fiber resin,

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

...Melt Flow Rate Tester , LCD Plastic Testing Equipments Application: Plastic rubber melt flow index equipment can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Purpose: Melt flow rate tester (also known as melt...

Brand Name:SKYLINE

Model Number:SL-PI08

Place of Origin:China

.... The melt flow indexer is suitable for measuring melt mass flow rate(MFR) and melt volume flow rate(MVR) of plastic materials such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate.

Brand Name:BonninTech

Model Number:XNR-400B/D

Place of Origin:Wuhan, China

...melt flow rate properties of thermoplastic (such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test methods of GB/T3682, ISO1133, ASTM D1238 test standard. It is widely supplied to the production ...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R803

...Plastic Testing Machine , Plastic Melt Flow Rate Testing Equipments Principle: Plastic Melt Flow Rate Testing Equipments (melt index) is plastic at a temperature and load, the melt every 10 minutes through a standard capillary die quality or melt volume, with MFR (MI) or the MVR value, which can distinguish thermoplastic adhesive in the molten state flow characteristics. For thermoplastics and chemical fiber raw materials...

Brand Name:KEJIAN

Model Number:KJ-3092

Place of Origin:China

...Melt Flow Rate Meter Plastic Testing Equipments​ Melt Flow Rate Meter Uses: KJ-3092 melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Melt Flow Rate...

Place of Origin:China

Brand Name:CHENGFENG

Melt Flow Rate Meter, Suitable for the Determination of the Melt Mass Flow Rate of Thermoplastics Specification Advantages that distinguish it from other domestic manufacturers of melt flow rate meter: 1. The heating cylinder is made of 304 stainless steel or alloy, because the melt flow rate meter works at high temperature for a long time (up to 400~500 degrees), the metal material...

Model Number:UP-5004

Brand Name:YOUBI

Place of Origin:CHINA

... The UP-5004 melt flow rate testing instrument is designed for determining the melt flow rate (MFR) or melt volume flow rate (MVR) of various plastic materials including ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate,

Brand Name:LIYI

Place of Origin:China

Model Number:LY-RR

..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2.

Brand Name:ZL

Model Number:ZL-3014

Place of Origin:China

Melt Flow Index Tester Mass Volumetric Melt Flow Rate Meter The Melt Flow Index Tester is designed to measure the Melt Flow Rate (MFR) and Melt Volume Flow Rate (MVR) of various plastics and resins under specific temperature and load conditions. This instrument determines the amount of material extruded through a standard die over 10 minutes, providing essential data for quality control and material...

Brand Name:HUAKAI

Place of Origin:Guangdong, China

... mm Dimensions: Compact yet functional size for easy placement. ± 0.5 ℃ Temperature Fluctuation: Maintains stable temperature control for consistent readings. melt flow index tester melt flow rate tester plastic melt flow index machine MFR MVR testing

Brand Name:AI

Model Number:AIC41098

Place of Origin:China

...Melting index apparatus/melt flow rate tester (touch screen) is used for determination of the melt mass-flow rate (MFR)/melt volume-flow rate (MVR) for thermoplastics like polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials...

Brand Name:Delta

Model Number:MFR

Place of Origin:China

Melt Volume Flow Rate ASTM D1238 Melt Flow Rate Tester by Extrusion Plastometer Introduction: MFR ASTM D1238 Melt Flow Rate Tester is deisgned and manufactured according to ASTM D1238-98 and ISO1133; MFR ASTM D1238 Melt Flow Rate Tester is suitable for testing fluorine plastic, nylon and other engineering plastics...

Brand Name:POOTAB

Model Number:PT-8036H

Place of Origin:China

... of aromatic sulfone, fluorine plastic, nylon and other engineering plastics, can also be applied to polyethylene (PE),(PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in

Place of Origin:China

Brand Name:ZEALTAL

... engineering plastics—such as polycarbonate, polyarylsulfone, fluoroplastics, and nylon—as well as lower-melting-point plastics like polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), and polycarbonate (PC).

Brand Name:YUYANG

Model Number:YY166

Place of Origin:China

..., such as polyethylene, polypropylene, pom, ABS resin, polycarbonate, nylon fluorine and other plastic polymers. The automatic temperature control methods of the machine three kinds of blanking ways, manual, timing and automatic control according to

Brand Name:BAXIT

Model Number:GLO-MF46

Place of Origin:CHINA

Melt flow Rate Meter / Plastic Melt Meter / Plastic Particle Melt Index Tester Product Description Equipment Overview 1. The heating cylinder is made of Hastelloy to avoid oxidizing and rusting at the high temperature (up to 400-...