iso1133 mass flow rate tester

Brand Name:Delta

Model Number:MFR

Place of Origin:China

MFR ASTM D1238 ISO1133 MVR MFR Melt Mass Flow Rate Tester Introduction: MFR Melt Mass Flow Rate Tester is designed and manufactured according to ASTM D1238-98 and ISO1133; MFR Melt Mass Flow Rate Tester is suitable for testing fluorine plastic, nylon and ...

Brand Name:Lonroy

Model Number:LR-1001-A

Place of Origin:China

... for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. 3. Product Character 1

Brand Name:AI

Model Number:MFR

Place of Origin:China

Introduction: MFR ISO1133 MVR and MFR Tester is deisgned and manufactured according to ASTM D1238-98 and ISO1133; MFR ISO1133 MVR and MFR Tester is suitable for testing fluorine plastic, nylon and other engineering plastics, it is also used to test ...

Brand Name:JINHAIHU

Model Number:XNR-400AC

Place of Origin:BEIJING, CHINA

... device for testing the melt flow rate of thermoplastics under certain condition. Melt flow rate (melt index) of thermoplastics is melt mass or volume which flow though the standard capillary die every 10 minutes, indicating by MFR. It’s different from

Brand Name:KEJIAN

Model Number:KJ-3092

Place of Origin:China

...flow index melt flow rate tester Uses: KJ-3092 melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. 1. Product Description: Design Standard GB/T3682-2000,ISO1133...

Place of Origin:Shaanxi, China

Brand Name:KACISE

Model Number:KMF-Series, KMF-1-3B

mass flow rate meter Overview mass flow rate meter are the leading precision flow and density measurement solution offering the most accurate and repeatable mass measurement for liquids, or slurries. Kacise meters offer the most accurate measurement available for virtually any process fluid, while exhibiting exceptionally low pressure drop. Technical Parameters: 1.Scope: liquid, high pressure gas, liquid solid blending fluid mass flow...

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

... flow rate of the special equipment. With the determination of melt flow rate MFR, measured melt volume rate MVR, measured melt density ρ, measured melt flow rate ratio FRR and other functions, this machine high precision temperature control, key parts

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R804-1

...Flow Rate Tester Purpose: Melt flow rate tester (also known as melt index meter) was measured under certain conditions thermoplastic melt flow rate of the special equipment. With the determination of melt flow rate MFR, measured melt volume rate MVR, measured melt density ρ, measured melt flow rate...

Brand Name:HongCe

Model Number:hcrtb-002

Place of Origin:CHINA

... acquisition architecture, and vector frequency conversion current stabilization technology. This enables fully automatic and accurate detection of gas relay flow rate, volume,

Brand Name:HiYi

Model Number:ZR-3061

Place of Origin:China

ZR-3061 Flue Gas Flow Rate Tester OVERVIEW ZR-3061 Flue gas flow rate tester is a handheld portable instrument used to measure the flue gas flow rate, flow, dynamic pressure, static pressure, temperature and other parameters of stationary pollution source...

Brand Name:POOTAB

Model Number:PT-8036H

Place of Origin:China

Melt Flow Rate Tester ,Melt Indexer Application : This tester is used for mensurating melt flow rate when the viscous flow state MFR value, it applies to the polycarbonate, higher temperature of aromatic sulfone, fluorine plastic, nylon and other ...

Place of Origin:China

Brand Name:CHENGFENG

...Flow Rate Meter, Suitable for the Determination of the Melt Mass Flow Rate of Thermoplastics Specification Advantages that distinguish it from other domestic manufacturers of melt flow rate meter: 1. The heating cylinder is made of 304 stainless steel or alloy, because the melt flow rate...

Place of Origin:China

Brand Name:GC

Model Number:GC-MI-BPV

...n various plastics and gums pass through a certain temperature and load in a viscous flow state. It is suitable for melting high temperature polycarbonate, poly sulfoxide, fluorine plastics, nylon and other engineering plastics. Also, it is appropriate for

Brand Name:YUYANG

Model Number:YY166

Place of Origin:China

ASTM D1238 ISO 1133 Electric Melt Flow Rate Tester of PP PE Material MFR/MVR Description: Melt Flow Index Tester is used to test the flowability of thermoplastic polymer under high temperature, such as polyethylene, polypropylene, pom, ABS resin, ...

Place of Origin:China

Brand Name:Wellmedlab

Model Number:YL-B

... according to national standards and specially used for testing flow rate of medical devices. Applicable to infusion set, transfusion set, infusion needle, catheters, filters for anesthesia,etc. Description: Range of pressure ...

Brand Name:Forster

Model Number:XJA-W-50/1

Place of Origin:Sichuan,China

...energy could I generate from a hydro turbine?. Power is the rate of producing energy. Power is measured in Watts (W) or kiloWatts (kW). Energy is what is used to do work and is measured in kilowatt-hours (kWh) or megawatt-...

Model Number:SS443A

Place of Origin:USA

SS443A Board Interface Hall Effect/Magnetic Sensor Flow Rate Sensing FEATURES • Quad Hall IC design minimizes mechanical stress effects • Temperature-compensated magnetics help provide stable operation over a wide temperature range of -40°C to 150°C [-40...

Brand Name:HIGHLAND

Model Number:MYHT-1-5

Place of Origin:China Dezhou

Product Description: The MYHT-1-5 Hydraulic Flow Meters is the perfect tool for measuring the flow of hydraulic fluid in snow cars. With a maximum pressure of 420 Bar, this device is able to handle the high pressures required for efficient snow car ...

Brand Name:SKYLINE

Model Number:SL-PI08

Place of Origin:China

.... The melt flow indexer is suitable for measuring melt mass flow rate(MFR) and melt volume flow rate(MVR) of plastic materials such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate.

Brand Name:BonninTech

Model Number:XNR-400B/D

Place of Origin:Wuhan, China

...melt flow rate properties of thermoplastic (such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test methods of GB/T3682, ISO1133, ASTM D1238 test standard. It is widely supplied to the production factory and