iec 60335 2 14 cylinder rod test probe

Brand Name:Sinuo

Model Number:SN2210-25

Place of Origin:China

IEC60335-2-14 Hand-held blenders φ40 mm Cylinder Rod Test Probe Standard and Application: The φ40mm cylinder rod meets the standard requirements of IEC 60335-2-14 Clause 20.103. It is used to verify the hand-held blenders other than hand-held food mixers...

Brand Name:kingpo

Model Number:IEC60335-2-24-cl.20

Place of Origin:china

...-2-14|EN60335-2-14|GB4706.30 IEC60335-2-14|EN60335-2-14 Appliance: This test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the

Brand Name:PEGO Electronics

Model Number:PG-TPR8

Place of Origin:China

Φ8mm Cylindrical Rod Test Probe for Blender as Per IEC60335-2-14 clause 20.102 1. Introduction The Φ8mm cylindrical rod test probe is designed to meet the test requirements of IEC60335-2-14 clause 20.102 and GB4706 clause 20.102, it is applied to check if ...

Place of Origin:China

Brand Name:Julixing

Model Number:LX-2B30

Conform to the IEC60335-2-14 clause 20.2. Means of a test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and ...

Brand Name:HJ

Model Number:HT-I24

Place of Origin:China

IEC 60335 Test Finger Probe Blender Probe Nylon Handle Stainless steel Probe Standard: IEC 60335-2-14 ‘Household and similar electrical appliances - Safety - Part 1: General requirements’ clause 20.102. Standard description: Blades of hand-held blenders shall be completely screened from above and shall not be able to touch a flat surface while rotating. Compliance is checked by inspection and by applying a cylindrical rod...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I31

Test Rod With Nylon Handle 100mm Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of the reset button of a protective device. Appliance is checked by applying a rod in any direction to touch the protective device which is in off state. The diameter of rod is 76 mm ±0.1mm and it has a flat end. There shall be a distance of at least 1.5mm between the rod

Brand Name:SHC

Model Number:SC-F1218

Place of Origin:China

IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children...

Brand Name:Haida

Model Number:5063-HD

Place of Origin:China

APPLICATIONS & TEST PURPOSE: The machine design mainly focuses on two types of designs for the cover plate: fatigue and strength tests. Under the set force value, stroke, displacement, time and speed conditions, repeated tests are conducted on the product...

Brand Name:KingPo

Place of Origin:China

...Test Rod For Testing Concealment Of The Reset Button IEC 60335-2-16 Clause 22.102 Test Rod For Testing Concealment Of The Reset Button Of A Protective Device. Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of the reset button of a protective device. Appliance is checked by applying a rod...