high pressure air reverse circulation hammers

Categories:Reverse Circulation Hammers

Country/Region:china

Advantages: R.C.Drilling, referred to as " Centre Sample Recovery" or " Dual Wall Drilling",employs a Dual Wall Pipe where the drilling medium, normally high pressure air,is passed between the outer and inner tubes down to the face of drilling bit where it...

Brand Name:ROSCHEN

Model Number:RC 45

Place of Origin:Germany

High Impact Frequency Reverse Water Hammer / Water Well Drilling Hammer Reverse Water Hammer Introduction Reverse Circulation drilling, or RC drilling, is a method of drilling which uses dual wall drill rods that consist of an outer drill rod with an inner...

Brand Name:SOLLROC

Model Number:3''-5.5'' RC Hammer

Place of Origin:China

3"-5.5" Reverse Circulation RC Hammers Metzke Thread For Collecting Dry Sample Product Introduce: Reverse Circulation drilling, or RC drilling, is a method of drilling which uses dual wall drill rods that consist of an outer drill rod with an inner tube...

Brand Name:New Diamond

Model Number:Reverse Circulation Hammer

Place of Origin:Hunan, China (Mainland)

... for being produced with advanced craftwork and good material. It also has the followingadvantages: 1. Deliver maximum energy to drilling bit, fast drilling speed and low air consumption due to

Model Number:CRE004

Place of Origin:China

Brand Name:Super Diamond

... φ107mm RE004 φ111-φ127 3.5"-4" Remet 4"Metzke Working Pressure Impact rate at 1.5Mpa Recommended rotation speed Air consumption 1.7Mpa 2.4Mpa 3.0Mpa 1.0-3.0Mpa 30HZ 25-40r/min 8m³/min 12m³/min 16m³/min RC series reverse circulation DTH Hammer is the

Brand Name:GLORYTEK

Model Number:3" 4" 5" 6" 8" 10" 12"

Place of Origin:China

High Pressure Reverse Circulation RC DTH Drilling Hammer for Rock Powders Sampling Description DTH Hammer is one of key components for drilling equipment. They are powered by compressed air medium and supply continuous impact for bottom rocks with down-the-hole bit. They are widely used in ore drilling, water well drilling, Geothermal drilling, foundation drilling and oil drilling. Advantages: 1. The high-pressure...

Brand Name:JCDRILL

Model Number:JRC45

Place of Origin:Hebei,China

...with high pressure and medium to low pressure DTH hammers. It strictly matches with API standard and other Chinese industry standards.It is durable for being produced with advanced craftwork and good material. 1. Deliver maximum ...

Brand Name:Longway

Place of Origin:China

... are injected into the pipe through the mixer. Because the density of the mixed liquid is lower than that of the flushing liquid, the pressure difference between the pipe and the sample pipe causes the mixed gas and liquid to flow in the liquid. Under the

Brand Name:RanCheng

Model Number:RCJ150RC

Place of Origin:China

... or inclined holes and supports a variety of drilling technologies, such as auger drilling and down - the - hole hammer drilling. It is suitable for processing complex geology, such as soft layers and broken layers, so it is suitable for a variety of

Brand Name:KCarpenter

Model Number:KC5500

Place of Origin:Jinan

...motor protector Bearing in the vacuum pump is imported Low noise Accept high temperture , working temperture up to 130 to 150 degree no problem Cycle working time: 24 hours Long life Feature: Centrifugal circulation design High pressure big air volume,

Brand Name:Royal Machinery

Place of Origin:CHINA

Diesel Screw 185 Cfm Portable Air Compressor for Jack Hammer We offer diesel engine screw air compressors, together with drill rig: Full series screw air compressors are optimized for stronger frame and better towing protection and safety, stronger roof ...

Place of Origin:China (Mainland)

Brand Name:AFK

Model Number:NV

Product Description Product features 1) Working pressure 3000-6000PSI 2) Working temperature: 2500F(121℃), using buna. 3) Min flow capacity limited 4) Closed quickly at reverse flow direction. 5) 100% factory test. 6) Locking up pressure according to ...

Brand Name:Kinglong

Model Number:3inch, 4inch, 5inch, 6inch

Place of Origin:Wuhan

DTH drilling is a percussion system driving a piston inside hammer body with up and down motion by compressed air and transmitting an intensive percussion energy to the bit to enable the drilling by crushing the rock. Drilling method by DTH hammer exerts ...

Brand Name:Alees

Model Number:AS Multi-Flow / AS Airflow

Place of Origin:China

Introduction AS-MULTI-FLOW series of high temperature multi-flow flow full mode dyeing machine (pure air flow dyeing mode, pure over flow dyeing mode, air-over flow mixed dyeing mode) is a new generation with a wide range of suitable dyeing cloth, low ...

Brand Name:MIROC

Model Number:RC Hammer

Place of Origin:Shangdong,China

... and stope ore grade control. Characteristics of RC Hammer 1. Based on previous experience of ordinary hammers, combined with the features of reverse circulation hammer, optimized internal structure and ideal energy transfer, thus ensuring the series of

Brand Name:MIROC

Model Number:RE543 DTH Drill Bits

Place of Origin:China

RC RE543 Water Well Reverse Circulation Oil Well DTH Drill Bits RC hammers and bits are used in hole drilling in mines, hydrology and water well, geothermal well, geothermal air conditioning well, geologic exploration, gravel stratum, etc Especial suitable...

Brand Name:OED/OEM

Model Number:3 inch 4 inch 5 inches 6 inches

Place of Origin:China

Reverse Circulation Bit DTH Button Bit DTH Tools for H-RC4 MIC5 HPR5 DTH Hammers And Button Bits DTH Hammers Are Used For High Air Pressure Mining Dth Hammerblast Hole Drilling And Water Well Drilling Project. Working With DTH Drilling Pipe And DTH Drill ...