carbide mining buttons for dth drill bits

Brand Name:SOLLROC

Model Number:SD Series bit

Place of Origin:China

...DTH Drill Bits with Tungsten Carbide Button for Drill Rig Hammer Tools Product description Down-the-hole drilling is to drive the hammer which behind the drill bit by compressed air via the drill pipe. The piston strikes the bit directly, while the hammer external cylinder gives straight and stable guidance of the drill bit. This makes the impact of energy is not lost in joints and allowing for much deeper percussion drilling...

Brand Name:New Diamond

Model Number:SP882

Place of Origin:Hunan, China (Mainland)

...carbide steel SP882 shank DTH Drill Bits Diameter 216-311mm Description 1.Button bit is well known for its high wear resistance on medium-hard to hard abrasive rock formations (between 200 Mpa to 260 Mpa compressive strength).Featuring spherical tungsten carbide inserts that is known to have strong configuration against carbide fracture. 2.Recommended for eliminating hole deviation 3.Widely used drifting and tunneling 4.Bit...

Brand Name:JWE

Model Number:JK10.2T/JK13.2T/JK20.2T/JK15.2

Place of Origin:China

...carbide buttons for DTH drill bits Description: Our tungsten carbide buttons are mostly using for foundation drilling, piling, road milling, surface mining, underground mining, rock drilling, trenching and tunnelling assembling. Grade JK10.2T is mainly used for high pressure DTH drill and hydraulic screw-in drill etc, it's suitable for hot insert or cold pressing and made into DTH hammer, anchor bit, DTH

Brand Name:MIROC

Model Number:Rock DTH Drill Bits

Place of Origin:Shangdong,China

...Carbide Rock DTH Drill Bits , DTH Hammers And Button Bits In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length. DTH bits are paired with their corresponding hammers (by drilling...

Brand Name:MING

Model Number:MDCOP34-105

Place of Origin:CHINA

...Carbide Down The Hole DTH Drill Button Bits For Oil Well Drilling Product category: DTH drill tools Diameter: 105 mm KINGDRILLING high air pressure DTH button bit description: The design of high air pressure DTH bits allows for precise steering and control during drilling operations. The focused air pressure generated by these bits...

Brand Name:MTH

Model Number:SD5 DTH Drill Bit

Place of Origin:CHINA

...Carbide Steel DTH Drill Bit for Rock Drilling with Diameter 50-600mm Product Description: Our DTH Drill Bit is a high-quality, durable product designed for rock drilling, mining, construction, and quarry applications. It is made from tungsten carbide and steel, and features a flat front face type. Moreover, the product comes with an air tube for added convenience. In addition, our DTH Hammer Bit, Down The Hole Drill Bit, and DTH Button

Brand Name:MIROC by KSQ

Model Number:DTH89

Place of Origin:China (Mainland)

...alloy steel .Besides, all our DTH bit is using best quality carbides. In addition art manufacturing technology makes our dth89 DTH bit for mining is with higher and more reliable quality. Our DTH hammer and bits are compatible with CIR, DHD, QL,SD,Mission,

Brand Name:JCDRILL

Model Number:All Models

Place of Origin:China (Mainland)

...durability and wear characteristics. Specific heat treatment standards and special “stress relief” processes ensure consistent performance. DTH hammer bits are designed for maximum performance and hole cleaning ability and high penetration rate. We can

Brand Name:Super Diamond

Model Number:CD85-280

Place of Origin:China

...drilling hammers and button bits DTH hammers are used for high air pressure mining dth hammerblast hole drilling and water well drilling project. Working with DTH drilling pipe and DTH drill bit, mainly applied in Mining, Marble quarry or well drilling and

Brand Name:OEM

Place of Origin:CHINA

...Carbide Low Pressure Water Well Drilling Bits DTH Bit for Low Pressure DTH Hammers 1. Size range of low pressure DTH rock bit: 68mm-253mm 2. DTH rock bit face shapes: Flat, Concave, Convex 3. DTH bit button shapes: Spherical, Ballistic, Parabolic 4. Application of DTH rock bit: They are widely used for mine, quarry, road construction for the drilling and blasting work, water well drilling, slope protection, anchoring, etc. 5. Bit...

Place of Origin:China

Brand Name:Jinquan

Model Number:DHD340A, DHD350R, DHD360, DHD380; Cop32, Cop34, Cop44, Cop54, Cop64, Cop84; Mission 40, Mission 50 , Mission 60, Mission80; SD4, SD5, SD6, SD8; TD40, QL50, QL60, QL80; BR2, BR3.

... and low air pressure DTH drill bits are both available. Our DTH button hammer bits are made from the best tungsten carbide tips & special steels, after hot heat treated, the steels reach a good level in surface compression & fatigue resistance. All of our

Brand Name:ROSCHEN

Model Number:165mm

Place of Origin:CHINA, USA

...the bit diaair hole nos.carbide button shape and the face shape. High air pressure and low air pressure DTH drill bits are both available. Our DTH button hammer bits are made from the best tungsten carbide tips & special steels, after hot heat treated, the

Brand Name:VKD

Model Number:Customized

Place of Origin:Zhuzhou

...carbide Conical button parabolic buttons carbide dome buttons for DTH bits Brief introduction about tungsten carbide buttons Tungsten carbide is used many drilling and mining fields. With high resistance to wear is demanded in drilling, milling, trenching and cutting. VKD offers an extensive product line, including many dimensions and shapes and which is constantly being used on drilling...

Brand Name:SEEGO CARBIDE

Model Number:Standard & Customized

Place of Origin:CHINA

...high hardness and shock resistance, they are widely used in DTH drill bits for rock, coal, oil, water well mining and engineering field. Grades & Properties and Recommended Applications: Grade ISO Density Hardness Recommended ...

Brand Name:Zhuzhou Jintai Cemented Carbide

Model Number:Carbide Tipped Drill Bits

Place of Origin:Hunan, China

... Carbide Buttons , High Pneumatic DTH Drill Bit Parts Product Description Tungsten carbide buttons are mainly used for high and low pressure DHT drill and hydraulic Screw-in drill and so on. They are suitable for hot insert or cold pressing bit inserting...

Categories:DTH Drill Bits

Country/Region:china

About us: We are a leading manufacturer for various of high air pressure rock drilling tools, incl. DTH hammers and bits, RC hammers and bits, top hammer button bits, ODEX etc. Our factory locates in LiuYang city, HuNan province, China, where occupies an ...