cable bending machine testing

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some

Brand Name:ZL

Model Number:ZL-1027

Place of Origin:China

... at the cable, then to swing the jig right and leftwith the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested by connecting to the electricity. While the

Brand Name:Sinuo

Model Number:SN1112D

Place of Origin:China

..., and it is also used to test the broken cores of PVC insulated cables under load to verify their reliability. Bending Test A sample of vehicle charging cables of appropriate length shall be fixed in the apparatus as shown in figure 2, and loaded with a

Brand Name:MIYU

Model Number:MY-XC-C6

Place of Origin:China

...Cable Bending Tester (MY-XC-C6), with competitive price, both OEM and ODM available from us Technical Specification 1. R angle :R3,R5,R12.7, replaceable fixture 2. Test speed: 5-60 times / min, adjustable 3. Test times:99999999 times 4. Rotation mode: positive turn mode, reverse mode, positive and reverse mode 5. Test mode: Conduction test , Life test 6. Counterweight: 50g ,100g , 200g , 300g , 500g, each six 7. Test...

Model Number:LR-A006

Place of Origin:China

Brand Name:Lonroy

...Bending Machine Cable Bending Test Machine Plastic Test UL 817 Wire Swing Bending Machine Cable Bending Test Machine 1.Use The test machine is in accordance with UL817 and other relevant standards "general safety requirements for software components and power supply cord".Applicable for bending test of power cord and DC line by related manufacturer and quality inspection department. 2.Specification Test...

Brand Name:JIEDONG

Model Number:JD-3004

Place of Origin:Guangdong, China

...) JD-3004 product description: Applicable to the relevant manufacturers and quality inspection departments to bend (bend) the cable test. The test method is to fix the cable on the fixture. When the test is performed, the clamp swings left and right.

Brand Name:HongCe

Model Number:HC9920

Place of Origin:China

...the ultimate guardian of cable safety performance, designed to simulate high-frequency bending and current load impact in real use scenarios. It is not only a testing tool in the laboratory, but also an invisible line of defense connecting the safety of

Brand Name:Kingpo

Model Number:GX-4020-A

Place of Origin:China

... Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC Equipment Description: The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires by fixture and add specific load. During test, the

Brand Name:AI

Model Number:AIC22176

Place of Origin:China

...cable bending and torsion tester is according to pre-set test conditions (bending angle, bending rate, number of trials), with a continuously make test sample right and left bend durability test device and straight line torsion durability test equipment through an external mechanical device. Wherein the fixture terminals of torsion test and bend test...

Brand Name:Gaoxin

Model Number:GX-4019

Place of Origin:China

...drive Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC 2.Equipment Description: The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires by fixture and add specific load. During test,

Brand Name:LIYI

Model Number:LY-1065

Place of Origin:Dongguan Province, China.

..., apparel, fabric, tape paper products, pharmacy and so on, for tensile strength, tear resistance, peel strength, bend strength, shear force , ect with different fixtures according to national and international standards customer required. This machine is

Brand Name:YUYANG

Model Number:YYW002

Place of Origin:China

.... This improves testing capacity.IEC60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test, the cords need to be rotated 90°. The plug sockets are designed to make this rotation easy and accurate. This tester has

Brand Name:KINSGEO

Model Number:KJ-1066

Place of Origin:China

...compression,bending,peel, shearing force, peeling force, modulus of elasticity,and elongation of materials, components, and finished product for metal, plastic, rubber, textile, synthetic chemicals, wire and cable,leather,package,tape,film,solar cell,etc.

Brand Name:Kinte

Model Number:WH-8801A

Place of Origin:Guangdong,China (Mainland)

...folding strength. Test method is to sample fixed in the fixture, and add a certain load, test fixture swing around, after a certain number of times, view the break rate; or to not power, see the total number of swing. The machine can automatically count,

Model Number:UP-4040

Brand Name:YOUBI

Place of Origin:CHINA

...Bending Tester 6 Independent Station Cable Swing Fatigue Testing Machine UP-4040 UP-4040 6-station independent wire bending swing tester complies with UL817 & GB standards. Features intelligent auto-stop when wire breaks, adjustable speed and angle, and is widely used for USB cable, power cord, and headphone wire flex endurance testing...

Brand Name:SKYLINE

Model Number:SL-C110

Place of Origin:China

Machine Introduction This equipment is suitable for testing the ability of optical cable to withstand repeated bending, by applying repeated bending force, for qualified optical cable requires that the optical fiber is not broken, the attenuation change of the optical fiber does not exceed the value specified in the optical cable product standard, and the optical cable sheath does not crack. Test...

Brand Name:PEGO

Model Number:PG-FT01

Place of Origin:China

... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-B602

...Bend / Tensile Testing Machines 500N With Pointer Type And LCD Display Product Description: This series of Tensile Testing Machines is widely used in wires & cables, hardware, metal, rubber, footwear, leather, apparel, fabric, tape paper products, pharmacy and so on, for tensile strength, tear resistance, peel strength, bend...

Brand Name:BH

Model Number:CGB

Place of Origin:China

... characteristics The big bending machine is used to bend the steel plate to the frame structure. Four frame structures share the circle equally, and they are welded together with the big discs on the both sides. Also all the structures are welded to the