attenuators connector 2 92mm

Brand Name:SWT

Model Number:SW-SMA10

Place of Origin:China

10 W Coaxial Fixed Attenuators DC-26.5 GHz Connector SMA, 2.92 mm Description The coaxial fixed attenuator is suitable for any need to reduce the power level or circuit matching, can quantitatively absorb the energy in the transmission line, extend the ...

Place of Origin:Chengdu,China

Model Number:ZSJXX-30RKA-40

Brand Name:Zysen

..., 60dB&70dB to 80dB attenutation. 1. Electrical Specifications Frequency Range DC-40GHz Attenuation 10,20,30,40,50,60,70,80dB Power 30W CW at 25°C (Derated linearly to3W at 100°C) Impedance 50ohm Connector 2.92mm-Male/Female Model No. Attenuation &

Brand Name:Terui

Model Number:2.92-KFD0.3AG

Place of Origin:China

RF Coaxial Connector 2.92mm female Flange Mount 2.92mm Precision Microwave Connectors Panel Mount also named K connector, developed from series SMA connector. 2.92mm Precision Microwave Connectors Panel Mount has the advantages of small size, lightweight, ...

Brand Name:ELT

Model Number:K-KFD20G

Place of Origin:China

2 Holes Flange SMK Series Female Straight RF Coaxial Connector 2.92mm K type is also called 2.92 type connector, this series of products is a commonly used millimeter wave connectors, with a frequency of up to 40 GHz, can be used with SMA series and 3.5 ...

Brand Name:KCO, Kocent Optec Limited

Model Number:FC/APC

Place of Origin:Guangdong, China

...: Plastic, metal Dusty cap color: green, beige, White Attenuation range: 0-30 dB Fiber optic attenuator descriptions: Fiber optic attenuator is a device used to reduce the power level of an optical signal, either in free space or in an optical fiber. The

Brand Name:YLT

Model Number:Attenuators

Place of Origin:China

...by step within certain frequency range,they can also be used to adjust the test system’s power as inset attenuator . Power Rating: 2W Frequency(GHz): DC-3Ghz Impedance: 50Ω Attenuation Range: 0-30dB In 1dB Steps ConnectorNK-NK: SMAK-K Max VSWR: ≤1.6:1

Brand Name:Sinrui

Model Number:2.92/2.92-KFKG

Place of Origin:China

Products Name: 40Ghz 2.92mm female to female adapter with 4 holes flange Products Descrption: high performance End Launch connectors are designed to provide low VSWR, mode free wideband response to 40 GHz for single-layer and multi-layer printed ...

Brand Name:Vinncom

Model Number:VN-PD-40G-2.92-2W

Place of Origin:China

... (Watt max.) 2W Isolation(dB) ≥9 Amplitude Balance(dB) ±0.5 Phase Balance ±5° Operating Temperature( ℃ ) -35 ~ + 75c Interface 2.92mm Female Size 17.5*15.8*10mm Dimension Tolerance(mm) ±0.5 Mounting 3-

Model Number:attenuator

Place of Origin:Zhejiang, China

Brand Name:OEM

#detail_decorate_root .magic-0{position:relative}#detail_decorate_root .magic-1{position:absolute;left:12px;top:12px;height:24px;z-index:3;overflow:hidden;background-color:#3a3531;display:flex;align-items:center;border-radius:12px;font-size:12px;color:...

Model Number:FKATT-002

Place of Origin:China

Brand Name:FONGKO

#detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#53647a;font-family:Roboto;font-size:24px;color:#53647a;font-style:normal;border-bottom-width:2px;padding-top:8px;padding-bottom:4px}#detail_decorate_root .magic-1{vertical-align...

Brand Name:Vinncom

Model Number:VN-AT-40G-20W-2.92mm

Place of Origin:China

...92mm Male-2.92mm Female 3 10 20 30 40dB Attenuator Connector naming rules: 2 - 2.4mm (Outline A) K - 2.92mm (Outline B, C, D) Outline B - Attenuation: 10, 20, 30dB Outine C - Attenuation: 3dB Outine D - Attenuation: 40dB Part Number VN-AT-40G-20W-2.92mm Operating Frequency DC-40 GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt, max) 20 Interface 2.92mm Male - 2.92mm...

Brand Name:FOCABLE

Model Number:ST Inline Variable Fiber Optic Attenuator

Place of Origin:China

... in fiber optic systems and test sets. When mated to a standard connector, the variable attenuator connector causes the optical signal to become attenuated by creating a variable air gap between the connector ferrules. Attenuation is adjusted by means of a

Model Number:ZSHP-40230-S

Place of Origin:Chengdu,China

Brand Name:Zysen

..., from 1GHz to 40GHz, Connector SMA, N, 2.92mm are available. Customized frequency and optimized specifications available. Contact us with your requirement. Electrical Specifications Cutoff Frequency 4.0GHz Pass Band 4.0-...

Brand Name:ZSX

Model Number:2.92-J-3506

Place of Origin:China

RF Microwave Millimeter-wave Connectors 2.92mm K Type Jack (Female) For 3506 Cable Radio Frequency Connector (RF connector for short) is a separable electronic component that is installed on cables or equipment for the transmission of radio frequency ...

Brand Name:New Light

Model Number:MPO

Place of Origin:China

... attenuator is a female connector. It has a female connector and a male connector. Female connector without PIN on the connector, male connector has PIN on the connector. The attenuation of this attenuator is 3dB. Normal we are produce it into 3dB, 5dB,

Brand Name:Geehe or OEM

Model Number:Bulkhead Attenuator

Place of Origin:Wuhan, China

...Attenuator , Variable Attenuator Abailable Attenuation From 1-30dB Detailed Product Description Material: Plastic Or Metal Attenuator Type: Bulkhead Attenuator Connector Type: LC SC FC Attenuation Value: 1-30 DB Interface Polish: UPC/APC Bulkhead Attenuator LC,abailable attenuation from 1－30dB EX: BAT -LC-2A-02 Product Description Optical pad attenuators...

Brand Name:OEM and ODM

Model Number:Fiber optic attenuator

Place of Origin:Made in China

...attenuator male to female Plug type fixed attenuator connector Description of optic fiber attenuator Fiber Optic Attenuator is one kind of optical passive device which is used to debug the performance of the optical power in the optical communication system,debugging fiber optic instrument calibration correction, optical signal attenuation.And used for the attenuation...

Model Number:ZSGL330360-16K

Place of Origin:Chengdu,China

Brand Name:Zysen

...92mm Coaxial Isolator, Isolation 15dB Key Specifications: Frequency Range 33.0 – 36.0GHz Insertion Loss ≤1.0dB Isolation ≥15dB VSWR ≤1.50 Impedance 50Ω Forward Power 5W Reverse Power 1W Connectors 2.92mm-Female Operating Temperature -30ºC~ +70ºC Zysen offers Coaxial Isolator, cover low band VHF, UHF from 30MHz and high frequency band to 40GHz, power handle up to 1KW, Connector SMA, N, BNC, 2.92mm...

Brand Name:YINGDA

Model Number:ATTN-SC/ST S-MVOA-01

Place of Origin:china

...receiver sensitivity, usually place in the optical receiver input to adjust receiving light power. It is in the middle of fiber connector, suitable for all kinds of fibre optic connector with all high performance of connectors. When use optical attenuator,

Brand Name:KEXINT

Model Number:Fiber optical attenuator

Place of Origin:CHINA

... for needing.They are used in the transmit line of fiber.There are two kinds of attenuator,alterable and fixable .The attenuation form 1dB to 65dB. Optic attenuator is a precise device that provide the attenuation form 1dB to 65dB.It is design under the