amine value 330 epoxy curing agent

Brand Name:DAHUA

Place of Origin:guangdong

...Value: 325-365 (mg KOH/g) Recommended Using Level: 7-15 Amine Value: 325-365 (mg KOH/g) Boiling Point: >260°C PH: 8.3 Form: Liquid Storage Temperature: 0-35°C Highlight: DH-8895 Epoxy Curing Agents , Cycloaliphatic Amine Epoxy Curing Agents , Solvent-free Epoxy Curing Agents Cycloaliphatic Amine Solvent-free Epoxy Curing Agents...

Brand Name:Zhuhai Feiyang

Model Number:FEC-1051

Place of Origin:Zhuhai,

... Very fast curing, with gel-time about 5min, sandable in about 1h. Cost effective. APPLICATIONS Suitable for rapid repair and joint filling of concrete. INDEX Appearance Yellow transparent liquid Amine Value 240±30mgKOH/g Viscosity(25℃) 5000-15000mPa.s

Model Number:WQ-048

Brand Name:WeiLi Resin®

Place of Origin:china

Epoxy Hardener WQ-048 Product Description WQ-048 is an aqueous solution of modified aliphatic amine adduct, contains no cosolvent. Characteristics Fast reaction Low odor, eco-friendly Good water resistance and salt fog resistance Product Technical ...

Brand Name:HONREPOXY

Model Number:HW-8721

Place of Origin:CHINA

.... 721 curing agent can be formulated to low or zero VOC. It offers good pot life, good dry speed, and good emulsion stability even at low solids. Cured coatings exhibit high gloss, a balance of hardness and flexibility, and very good adhesion to concrete.

Brand Name:HONINGLITE

Model Number:PA2117

Place of Origin:CHINA

Phenalkamine Epoxy Curing Agent with Good Adhesion for Heavy Duty Industrial Epoxy Coatings Product description HONINGLITE PA2117 is a unique type of epoxy resin hardener known as a phenalkamine. Phenalkamines are an excellent option for epoxy systems tha...

Brand Name:wenyou

Model Number:8218A

Place of Origin:China

... with LH-8116, a modified amine curing agent. Applications This epoxy system is designed for various room temperature curing applications, including insulation products and electronic connectors. Processing Methods The material can be processed using a

Brand Name:EXCEEDCHEM

Model Number:DMTDA(Ethacure 300)

Place of Origin:China

... Typical Properties: Appearance: Light yellowish liquid Density (g/cm320℃): 1.21 Amine value (mgKOH/g): 536 Viscosity Cps(20℃): 690 TDA content: ≤1.0% Water: ≤0.1% 6. Use: DMTDA is a new type of polyurethane elastomer curing crosslinking agent, in

Brand Name:Anjeka

Model Number:Anjeka4610

Place of Origin:China

Anjeka4610 rheology additive improve the anti-sagging performance of epoxy thick-coat systems GENERAL DESCRIPTION Anjeka-4610 is a rheology additive for solvent-free and solvent-borne systems to improve rheological properties. It is highly recommended for ...

Brand Name:Center Enamel

Place of Origin:China

...Epoxy Hardener Synthesis Epoxy hardeners, or curing agents, are essential chemical components that drive polymerization and cross-linking reactions in epoxy resin systems. These hardeners—including various amines, polyamides, anhydrides, or catalytic compounds—determine the final properties of cured...

Brand Name:Araldite

Model Number:F330

Place of Origin:USA

Araldite F330 No-Mix Methacrylate Adhesive for Metal and Plastic Structural Bonding Simple attribute Araldite® F 330 with Hardener Lacquer 2 is a "no-mix", room temperature curing methacrylate adhesive suitable for bonding metals and plastics. The product ...