a type s45c sprue bushing

Brand Name:SENLAN

Place of Origin:China

... series and Performance Sprue Bushings. All but the Performance Sprue Bushings are made from steel with a base hardness of 43-45 HRc, and the “LN” series has an additional surface treatment that brings the surface hardness up to about 60-...

Brand Name:BD

Model Number:BDSB0000

Place of Origin:China

... into the interior of the mold. Regarding the material, SKD61 and S45C are commonly used. S45C is a medium carbon steel with excellent wear resistance, but the ductility is reduced, the quenching performance is not good, and the hardness after quenching is

Brand Name:HUIXIANG

Model Number:B18

Place of Origin:China

Guangdong made SKD11 Type A Sprue Bushes HASCO MISUMI JIS DME DIN Plastic Mold Parts Product Detail Material S136H Hardness 48-50HRC Heat treatment Available Service Made-to-order Surface treatment TiCN, TiN, TiALM, Ticrn, nitriding , Black oxygened, Black...

Brand Name:DATONG

Model Number:DT-010

Place of Origin:Dongguan P. R. China

PRODUCT DESCRIPTION Sprue bush A type Standard: MISUMI, ASTM, JIS, customized Material: S45C, SKD11, SKD61, etc Hardnesss: HRC according to the material Treatment: vacuumed Product name A/B/C type Sprue bushing Material S45CSKD61SUJ2S136 etc Tolerance 0.01...

Brand Name:KEGAO

Place of Origin:China

Sprue Bushing For Plastic Injection Machine Parts And SKD61 Material Description: Parts Name: Sprue Bushing For Plastic Injection Machine Parts And SKD61 Material Hardness: 50-52HRC Product size: Customized/As Per Drawings Grinding accuracy: ±0.001mm Product material: Japan (SKD11.SKD61.SKH51.S45C...

Brand Name:BAITO

Model Number:BT540

Place of Origin:China

...type Sprue bush for injection mould Product Description: The sprue bush is the connecting member between the machine nozzle and the mold face, and provides suitable aperture through which the material can travel on its way to the mould cavity or the start of the runner system in multi-impression molds.There are two basic design of sprue bush which differ only with respect to the form of seating between the sprue

Brand Name:INWAY

Model Number:INW-310

Place of Origin:CHINA

Groove Hardened Steel Bushings INW-310 Standard Type S45C Material INW-310 hardened steel bushings made of high quality low-carbon steel or stainless steel with special techniquie .The surface can be carburizing to imporve the hardness.They're widely used...

Brand Name:Customise

Place of Origin:China

We make customized hot runner parts & plastic mold parts for mold makers and plastic injection workshop. Include hot runner manifold,nozzle,temperature controllers, coil heaters, copper heaters,valve pin, hydraulic,cavitiy core inserts,pins and sleeves etc...

Brand Name:GME

Place of Origin:China

...Type Thermocouple for plastic injection molds​ Description: 1) Hot runner heaters also known as cable heaters can be formed to a variety of shapes as required by its many applications. Frequently though, hot runner heaters are configured as small diameter, high performance nozzle heaters that are fully annealed. 2) Hot runner heaters are used on injection molding machine nozzles and sprue bushings...

Brand Name:Chitwing

Model Number:Scanning Pen

Place of Origin:China

... type Three-plates mold Cold runner Part Material: PC+ABS Gate: Side gate Surface finish 1. TPU surface EDM with Makino VDI21# 2. Other surfaces EDM with Makino VDI27# Steel of cavity & core Harden (1*2/S136) Sub-inserts, ejector pin and sprue bush are

Place of Origin:CHINA

Brand Name:Longziyuan Precision Mould

...granules are slowly pushed forward by a screw-type plunger, the plastic is forced into a heated chamber called the barrel where it is melted. As the plunger advances, the melted plastic is forced through a nozzle that seats against the mold sprue bushing,