80mm blender probe

Brand Name:HJ

Model Number:HT-I24

Place of Origin:China

... Finger Probe Blender Probe Nylon Handle Stainless steel Probe Standard: IEC 60335-2-14 ‘Household and similar electrical appliances - Safety - Part 1: General requirements’ clause 20.102. Standard description: Blades of hand-held blenders shall be ...

Brand Name:PEGO Electronics

Model Number:PG-TPBT

Place of Origin:China

...Probe as Per IEC60950, IEC60065 and IEC62368-1 for Testing TNT Circuit 1. Introduction The blunt probe is designed according to IEC60950 figure 2C, IEC60065 figure B1, IEC62151 figure 3, UL6500 figure B.1, IEC62368-1 figure V.3. It is applied to check if the exposed parts of TNT circuits of information technology equipment has adequate protection. 2. Specification Length of the probe 80mm±0.2mm Radius of probe R6＋0.05mm Diameter of probe

Brand Name:KingPo

Place of Origin:China

... Product information: The blender probe complies with IEC60335-2-14 CI.20.102. It is used to test whether the blade of hand-held stirrer is completely concealed from above and flat ...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I24

... from above and flat surface can be touched when the blade is rotating. The test is achieved by applying a cylindrical rod from any position where the angle between the probe and the blade above is 45°to touch the blade. During the test, it shall not be

Brand Name:kerang

Model Number:HT-I24

Place of Origin:CHINA

Blender Probe HT-I24 Standard:IEC60335-2-14 CI.20.102. Application:It is used to test whether the blade of hand-held stirrer is completely concealed from above and flat surface can be touched when the blade is rotating. Test sample:Handheld blender. Feature:The test is achieved by applying a cylindrical rod from any position where the angle between the probe...

Brand Name:kingpo

Place of Origin:china

... A blender container shall not break or crack during normal use. 30.4.4.2 A blender employing a thermoplastic container shall be subjected to the test outlined in 30.4.4.4– 30.4.4.7. 30.4.4.3 A blender employing a glass container shall be subjected to

Place of Origin:China

Brand Name:BONAD

Model Number:BND-14AB

...probe 14AB BND-14AB Technical Parameters: 1, Test Probe Length:80mm 2,Probe Diameter:1.0mm 3,Material:The handle is made of nylon, tip is made of hardened steel 4,Standard: IEC60884 ,IEC61032 Fig.10 1 Product Explanation The socket protection door test needle probe...

Brand Name:Sinuo

Model Number:SN2210-25

Place of Origin:China

...blenders φ40 mm Cylinder Rod Test Probe Standard and Application: The φ40mm cylinder rod meets the standard requirements of IEC 60335-2-14 Clause 20.103. It is used to verify the hand-held blenders other than hand-held food mixers provided with a blender...

Brand Name:REPUSI

Model Number:REP-1.5N-04

Place of Origin:JIANGSU,CHINA

... cases for the recording of electrophysiological signals. Stimulating Probe Specification : Type Code Remark Monopolar(shield shaft) REP-1.5N-04 Probe shaft length:80MM-120MM Tip diameter :0.2MM-3.0MM Cable length :1000MM-2500MM Stimulating Probe Show

Brand Name:JLX

Model Number:LX-12580

Place of Origin:Made in China

Test Finger Probe with 125mm * 80mm Circular Stop Face The test probe is carried out with a test probes similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125mm and thickness of 80mm instead of the non-circular ...

Brand Name:SHC

Model Number:SC-335F7

Place of Origin:China

IEC60335 Figure 7 Finger Nail Test Equipment IP Protective Probe Technical parameters: Model SC-335F7 Probe length 80mm Angle of the finger nail 37° Diameter of the test finger Φ12mm Product information: The test finger nail complies with the IEC 60335 ...

Brand Name:HS

Model Number:YDK-30-8

Place of Origin:China

Single phase 10W 50W YDK80mm Micro stirring ac induction motor for Mixing blender machine Introduction This is a type of ac induction motor. It is designed for mixer or blender machine and other similar application. The shaft and power and speed can ...

Brand Name:wenmeice

Model Number:LBT-4G

Place of Origin:CHINA

...Diameter: 52~54mm Temp. Range: 50~350C/100~700F Probe Size: Ø5*50mm With M8 thread Dial: approx. 54mm, we also have 57mm and 80mm dial Probe: 50mm /customized length available Temperature range: 50~350C/100~700F /customized range available Pointer: Black/...

Brand Name:XUNSHI

Model Number:SZXS-C-JE-080-S

Place of Origin:China

...widely used in Magnetostrictive level gauge/sensor/probe. We keep stock of 100,000+ meters of magnetostrictive alloy wire of diameter 0.50mm/0.75mm/0.80mm. This makes it possible for us to make the-next-day delivery,the high temperature Magnetostrictive

Brand Name:Lonroy

Place of Origin:China

...Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test pin length 80mm

Brand Name:TMTeck

Model Number:HT-5/GT-12

Place of Origin:China

HT-5/GT-12 High Temperature 350℃ Probe transducer for Ultrasonic Thickness Gauge Model: HT-5/GT-12 Frequency: 5MHz Diameter: 14mm Measuring Range: 4mm-80mm Description: For high temperature(350ºC) measurement. About US TMTeck Instrument Co....

Place of Origin:Beijing, China

Brand Name:NUBWAY

Model Number:NBW-C325

...*80mm*100mm big treatment handle, save a lot of treatment time 3,Best cooling system, Italy import water pump with 10L ...

Brand Name:Kenwei

Model Number:JW-GX80

Place of Origin:Guangdong,China

Throat Metal Detector Machine For Checking Powder, Granules Materials The throat metal detector is used to detect all kinds of powder, bulk materials, and sheet materials. It is suitable for installation in the free-fall environment such as the bottom of ...

Brand Name:HUATEC

Model Number:Dual element transducer

Place of Origin:China

Dual Element Transducers Of Ultrasonic Thickness Gauge Optional accessories of ultrasonic thickness gauge PT08: 5MHz 0.80-100.00mm PT06: 7.5MHz 0.80-30.00mm PT04 10MHz 0.7-12.00mm ZT12: 2MHz 4.00-300.00mm GT12 :5MHz 4.0-80.00mm Temperature upto 380℃ TC510...

Brand Name:TIAN RUI

Model Number:PT100 PT1000

Place of Origin:China

... (default) -200-+ 200C -50C+420C or customized Accuracy 2B,B,A,1 / 3B etc. available Probe Diameter 4mm,5mm, 6mm or customized Probe Length 30mm (default), 10mm, 20mm, 40mm,50mm, 60mm, 70mm, 80mm, 90mm, 100mm or customized Cable Length 0.5m, 5 m