700 heating temperature flammability testing equipment

Brand Name:YUYANG

Model Number:YY129

Place of Origin:China

... floor covering systems exposed to a flaming ignition source in a graded radiant heat environment, within a test chamber. It can also be used to measure this same critical radiant flux for exposed attic floor cellulose insulation. The European Union is

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

Customized Flammability Test Instruments for Manufacturing and Product Design: Igniting Safer Product Innovation In the manufacturing realm, ensuring the flammability characteristics of products and materials are well-understood and optimized is of ...

Brand Name:DAXIAN

Model Number:DX1012

Place of Origin:China

Plastic Ignition Temperature Testing Equipment for ISO 871 / ASTM D1929 Description: Decompose and release the combustible gas from plastic material under regulated testing conditions,ignited by outer flame and burned a certain time,to measure the minimum ...

Brand Name:AI

Model Number:AIC-1929

Place of Origin:CHINA

ASTM D1929 Ignition Temperature Tester Introduction: The ignition temperature tester is designed and manufactured in accordance with the technical indicators and requirements specified in ASTM D1929. Under the specified test conditions, the combustible gas...

Brand Name:HOOHA

Place of Origin:China

Product introduction: This test method is used to measure the critical radiant flux of horizontally-mounted floor covering systems exposed to a flaming ignition source in a graded radiant heat environment, within a test chamber. It can also be used to ...

Brand Name:SKYLINE

Model Number:SL-FL50

Place of Origin:China

.... This equipment’s the oxygen analyser is adapted Paramagnetic Type which has a precise, long life, less error rate and high reliability. TI (Temperature Index Tester) measures temperature index of specimen by heated mixing gases on temperature up to

Place of Origin:China

Brand Name:HongCe

Model Number:N/A

...Flammability Testing Equipment 1.Product information: Imported with original packaging insulation high temperature resistance armour thermocouple,0.5mm type K, armour heat-resisting1100℃(is superior to the standard 1050℃) 2.Deal board: Use deal board of 20cm*20cm for glow wire testing...

Brand Name:SHC

Model Number:SC-GW01

Place of Origin:China

...the testing temperature of 550 ℃ ～ 960 ℃ for 1 min by using the glow wire tester with large current. Then using required pressure (1.0N) vertically burns the test sample for 30s. By observing whether the test sample and bedding object ignite or the

Brand Name:GOLD

Model Number:GD-ASTMD1230

Place of Origin:China

... for clothing. It measures the intensity and speed of burning of flammable textiles once ignited when worn. It can also test the damaged area and damaged length of textile fabrics at 45° and the number of times they are exposed to flames when heated and

Brand Name:kingpo

Place of Origin:china

Model Number:KP-FT01

...Flammability Testing Equipment ,Glow-wire apparatus Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A ,GB/T5169.10,GB4706.1.It makes required material(Ni80/Cr20) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test temperature...

Brand Name:HTI

Model Number:HTB-008

Place of Origin:Guangdong,China(Mainland)

...tems exposed to a flaming ignition source in a graded radiant heat environment, within a test chamber. It can also be used to measure this same critical radiant flux for exposed attic floor cellulose insulation.Suitable for all kinds of flooring materials.

Brand Name:Kinte

Model Number:WH-8901JK

Place of Origin:Guangdong,China (Mainland)

...Flammability Test Equipment 0.5M3 Glow Wire Test Apparatus ​ Glow wire test is IEC6 0695-2-10: 2000 ~ IEC6 0695-2-13: 2000 Glow Wire / Hot Wire, Basic Test Method, Glow-wire Test Device and General Test Procedure and UL 746A, IEC829 DIN695, VDE0471 The use of non-flame ignition source program simulation test project. Glow wire tester will specify the material (4Ni80 / Cr20) and the shape of the heating wire with a large current heating

Brand Name:KINGPO

...Flammability Test Equipment HWI Hot Ignition Wire Tester IEC60695 Flammability Testing Equipment HWI Hot Wire Ignition Tester Lab Equipment IEC60695 Hot Wire Ignition Tester , HWI Test Equipment Product information: This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat...

Brand Name:BAXIT

Model Number:BXT-GW

Place of Origin:Shanghai, China(mainland)

...Flammability Testing Equipment Glow wire tester is designed and manufactured according to the requirements of "Glow Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electric fire electronic products, household appliances and their materials for ignition hazard test, simulating hot elements or Thermal stress caused by a heat...

Brand Name:Gaoxin

Model Number:GX-8348

Place of Origin:China

...tems exposed to a flaming ignition source in a graded radiant heat environment, within a test chamber. It can also be used to measure this same critical radiant flux for exposed attic floor cellulose insulation.Suitable for all kinds of flooring materials.

Model Number:LR-K003

Place of Origin:China

Brand Name:Lonroy

IEC 884 Needle-Flame Tester Flammability Test Equipment for Electric Components 700 ºC 1. The reference standard IEC 884-1, GB2099.1, VDE, IEC335, GB4706.1, GB5169.5, UL1694. 2. Technical specifications This product according to used in ...

Brand Name:Haida

Model Number:6014-HD

Place of Origin:China

...combustion test equipment. Calibration Procedure Position the copper block 10±1mm above the needle flame burner. Ignite the flame; the time for the copper block temperature to rise from 100°C±2°C to 700°C±3°C must be 44±2 seconds to validate the

Brand Name:Sinuo

Model Number:SN772C

Place of Origin:China

...IEC60695-2-13, it is required by IEC 60335 clause 30, IEC 60598, UL746A, etc. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in s short time. It is suitable for

Brand Name:YUYANG

Model Number:YY312

Place of Origin:China

UL94 Horizontal And Vertical Combustion Tester Temperature Accuracy ± 1 ℃ Description: UL-94 Flame Retardant Tester is used for the flammability testing of plastic materials such as V-0 V-1 V-2, HB, HF-1 HF-2, material or foam, and used in consumer ...