24 blade francis turbine generator

Brand Name:FORSTER

Model Number:HL180/ A194

Place of Origin:Sichuan China

...Turbine 2MW Francis Turbine Generator For Hydro Power Station Francis Water Turbine Generator Feature: A Francis turbine consists of the following main parts: Spiral Casing, Guide or Stay Vanes, Runner Blades, Draft tube, etc.. Francis turbines are almost always mounted with the shaft vertical to keep water away from the attached generator and to facilitate installation and maintenance access to it and the turbine...

Brand Name:DSSD

Model Number:francis turbine generator

Place of Origin:china

... runner from all sides, and then flows out of the runner approximately axially. The runner is composed of an upper crown, a lower ring and blades. Scope of application: H=30~700 m, medium flow rate, single unit capacity: tens of thousands of kW~hundreds of

Categories:Francis Turbine Generator

Country/Region:china

.... Originating from Sichuan, China, this advanced turbine generator boasts a design speed of 1000 revolutions per minute (r/min) and offers a wide power range from 300 kW to 20 MW, making it suitable for various hydroelectric power generation projects, from

Place of Origin:CHINA

Brand Name:Dongfeng Electric

... turbine to the center (radially enters), and then turns to the downward exit. The water flows into the runner and pushes the runner when passing through the blades in the direction of the axis, while passing downwards The blades also push the runner.

Brand Name:Wawushan

Model Number:HLA-004

Place of Origin:China

...Francis Turbine 1500kw Vertical Francis Turbine Generators Overview 1. Water inlet parts The water inlet components are composed of connecting pipes, water turbine inlet valves and expansion joints. The turbine inlet valve is used to shut down the unit in still water when a shutdown is required, and is also used to shut down the unit and shut off dynamic water flow when the unit is in emergency and the turbine

Brand Name:Hydrotu

Model Number:Francis turbine

Place of Origin:Zhejiang, China

Hydropower Equipment Francis Hydro Turbine / Francis Water Turbine with Generator for hydropower project Descrition: The Francis type turbine is mostly suitable for hydropower stations with medium or high head from 10m to 300m. They are in both vertical...

Brand Name:ZTIC

Model Number:Power Generation Equipment

Place of Origin:Henan，China

...Generation Equipment Hydro Turbine Generator 150kw Francis Turbine Generator Unit 1. About us Luoyang Zhongtai Industries CO.,LTD is focused on design and manufacturing hydro turbines. The company was founded in 2014. Luoyang Zhongtai strictly abides by IEC international standards and national standards. And has CE, ISO,TUV,SGS certificates. In the management system, we still adhere to the rigorous work style formed in the turbine...

Place of Origin:Jiangsu

Brand Name:steam turbine blade

Model Number:Customized

... Certified High Pressure Alloy Steam Turbine Blade Description: 1.Francis The Francis turbine are mostly suitable for hydro power station with medium or high head. The francis turbine we supply are compact in structure,reasonable in design,convenient...

Brand Name:Jiangsu Shenghuang

Model Number:SH-A30KW

Place of Origin:China-Jiangsu Province

..., wind turbines harness the kinetic energy of the wind and convert it into electricity. The kinetic energy of the wind is captured by the blades of a wind turbine, which always has three blades. The blades then rotate, and inside the turbine there is a

Brand Name:GreeF

Model Number:GV-3KW

Place of Origin:CHINA

...Turbine Generator , CE Certificate Wind Generator for Home and Commercial Use ●Simple structure ,1hour installation Technical specification Model GV-2KW GV-3KW Rated Power 2kW 3kW Max Power 2.5kW 4kW Start Wind Speed 2.8m/s (6.27mph) Rated Wind Speed 11m/s(24.64mph) 12m/s(26.88mph) Working Wind Speed 3-25m/s (6.72-56 mph) Safety Wind Speed 50m/s(112mph) Blades Length 3.65M(11.97ft) Blades Rotor Diameter 2.3M(7.54ft) Blades

Brand Name:Custom

Model Number:wind turbine

Place of Origin:China

wind turbine generator FRP Blades Type(Power) Lenth of blade m weight/pcs(kg) srart wind speed(m/s) 1 300w(S.L) 0.6-0.7 0.75 2.5 2 400w(S.L) 0.84 0.9 2.5 3 300w 1.05 1.5 2 4 300W 1.25 2.2 2.5 5 500W 1.3 2.5 2.5 6 600W 1.4 2.6 2.8 7 1KW-1.5kw 1.55 3.6 3 8 ...

Brand Name:URILIC

Model Number:150048

Place of Origin:China

Maglev Vertical Axis Wind Turbine 1500W 48V Vertical Axis Wind Turbine Generator Description: The 1500W Maglev Vertical Axis Wind Turbine undergoes a continuous improvement process, which incorporates exterior design, utility design, electrical engineering...

Place of Origin:China

Brand Name:Easwon

Model Number:FZY-300W

... Blades quantity 3pcs Blades materials FRP(Fiber reinforce plastic) Rated speed 400r/min Rated output power 300w Max. output ...

Brand Name:ENNENG

Model Number:PMG

Place of Origin:China

...Turbine Generator Product Drawing Technical Parameter Rare earth Nd-Fe-B permanent magnets Low Speed Direct Drive ,no use gear-box SKF bearing Power factor close to 1 Maintenance free , can be used in all environments . Long life time >20years, could run at high speed 24...

Brand Name:Fan Blades

Place of Origin:Xiamen China

Model Number:customized

Xiamen China Photovoltaic Module System 1 Year Warranty Photovoltaic products Product Description: Photovoltaic products are a high-quality, reliable energy source that provide reliable and safe power from a variety of sources. Our photovoltaic systems ...

Brand Name:OEM

Model Number:W100-3

Place of Origin:Guang Dong

Votage output: 2v - 12v DC ( 5V 12V ) Product name: Wind Generator Portable Portable Generator, for Beach, Camping, Tailgating, Easy to Setup Product size : 25.5cm x 25.5cm x 34cm Height Product weight: 3.10kg Package includes: 1x portable wind and water ...

Place of Origin:China and Usa

Model Number:JP-EW600

Brand Name:GSKA

...24/48v Rated current:25/12.5 600W Wind Driven Generator , Permanent Magnet Synchronous Model JP-EW600 Rated power(W) 600 Rated voltage(V) 　24/48 Rated current(A) 25/12.5 Rotor diameter(m) 1.73 Start-up wind speed (m/s) 　2.5 Rated wind speed(m/s) 　12 Survival wind speed(m/s) 　35 Working form permanent magnet synchronous Rotating direction Clockwise Blade NO.( piece) 　3 Blade...

Place of Origin:Zhejiang, China

Brand Name:Soonest

Model Number:so 12V 24V 48V

#detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#53647a;font-family:Roboto;font-size:24px;color:#53647a;font-style:normal;border-bottom-width:2px;padding-top:8px;padding-bottom:4px}#detail_decorate_root .magic-1{width:750px}#...

Brand Name:Guangda

Model Number:750kw, 1000kw ,2.5MW,2MW,3MW,4MW,5MW,6MW etc.

Place of Origin:China

...Turbine Shaft Main Shaft Wind Turbine Manufacturer A wind turbine generates electricity by harnessing the power of wind. A wind turbine shaft is the most central part of a wind turbine, subjected to highly dynamic loads and operating conditions. The energy from wind is converted into mechanical energy with the help of blades and rotors, which is then transferred to a generator...