100mm iec 60601 1 test rod

Brand Name:kingpo

Model Number:KP-TP61A

Place of Origin:china

IEC 60601-1-Test Rod According to IEC 60601-1-clause 8.4.2 Diameter: 4.0(-0.05~+0)mm Length: 100(-0~+0.5)mm TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Clause Measurement/testing Testing...

Brand Name:Sinuo

Model Number:SN2210-29

Place of Origin:China

IEC 60335-2 Test Rod For Interlock Concealment Door Of Microwave Oven Standards For Test Rod For Interlock Concealment: The test rod meets the standard requirements of IEC60335-2-25 clause 22.105 figure 101, EN61010-1, UL3101-1, UL3111-1 and CSA1010-1, etc. Technical Parameters For Test Rod For Interlock Concealment: Diameter 3 mm,100mm long, the handle is made of nylon, the rod is hardened steel. Rod...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I31

Test Rod With Nylon Handle 100mm Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of the reset button of a protective device. Appliance is checked by applying a rod in any direction to touch the protective device which is in off state. The diameter of rod is 76 mm ±0.1mm and it has a flat end. There shall be a distance of at least 1.5mm between the rod

Brand Name:Pego Electronics

Model Number:PG-TRP75

Place of Origin:China

IEC 60335-2-30 table 101 Φ75mm Cylindrical Rod with Hemispherical End for Testing Temperature Rising of Heater 1. Introduction Φ75mm Cylindrical rod is designed to meet the requirement of IEC 60335-2-30 table 101. The cylindrical rod has a diameter of 75mm and a hemispherical end for testing the temperature rises of surface of heaters. 2. Specification Diameter of the rod Φ75mm (hemispherical end) Length of the rod 50mm Length of handle 100mm