Home > Machinery > Industry Laser Equipment > Laser Marking Machines >

Puller Adhesion Tester For Coating

1-10 Results for

puller adhesion tester for coating

from 22 Products

HKSM-1 Puller Adhesion Tester Pull Method For Coating Large LCD Digital Display

... material, adhesive, chrome plating, nickel plating, concrete and other material coatings. The working principle of the instrument is to use the hydraulic system to measure the adhesion of the coating of a certain diameter on the surface of the matrix. The...

HUATEC GROUP CORPORATION

Address: 7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096

Tensile Multi Roll Coating Adhesion Tester With Drying Method

Adhesive Multi Roll Coating Manufacture Supplier Production Type Adhesive Testing Equipment Drying Method Product Description: This production line is applicable to the coating of pet, BOPP, PP, paper, etc. (applicable to scraping, etc.) Mainly used raw ......

Dongguan Liyi Environmental Technology Co., Ltd.

Address: Building 74, 96 kechuang road, Lianke Innovation Center, Nancheng District, Dongguan, Guangdong, China.

SY-M 10KN Digital Pull Off Adhesion Tester 0.001KN / 0.001MPa Resolution

...Adhesion Tester With Four Different Sizes Dolly SY-M 10KN Digital Pull-off Adhesion Tester Application: It is used to test the pull-off adhesion strength of the coating on steel surface, concrete surface or other material’s surface. Standard: ISO 4624 Paints and varnishes - Pull-off test for adhesion ASTM D 4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers......

Beijing Samyon Instruments Co., Ltd.

Address: Room A-109, No. 54, Shunren Road, Shunyi Dist,Beijing, China 101300

GB/T1720-88 JISK6894 Paint Testing Equipment Film Adhesion Tester

Film Adhesion Tester Paint Testing Equipment Standard: GB/T1720-88 JISK6894 Description: QFZ film adhesion tester is used to determine the adhesion of various coatings to the coated surface.The film adhesion performance was measured by the tracing method......

Hebei Better United Import And Export Co., Ltd.

Address: Hejie Town,Xianxian County,Cangzhou City,Hebei Province,China

GB / T1720 - 88 Packaging Testing Equipment Manual Or Electric Operation Film Electric Adhesion Tester

...Adhesion Tester Equipment Description: Electric film adhesion tester, determination of Planning circular path through the film adhesion properties. To Yuangun line scratches integrity within the film, according to the seven film on the substrate bond rating rating firm. According to the design of GB / T 1720, the degree of adhesion of the coating......

Dongguan Zhongli Instrument Technology Co., Ltd.

Address: No.62, Xinhe Management of Area, Wanjiang District, Dongguan city, Guangdong province ,China

Automatic Precision Coating Tester STX-600L ROHS Approved

...Coating Tester Purpose: Experimental and pilot production of products Suitable for coating substrates: PET, PE, CPP(12-188μm), aluminum foil, Copper foil(6-50μm) Suitable for applying adhesive:Solvent based and water-based adhesives Product Feature: Japan Technology Regulation Agency Automatic adjustment of coating thickness The adjustment accuracy is up to 1um Specifications: Commodity Precision Coating Tester......

Hoyamo and Sinowon Inc

Address: R501,Unit 1,Building 3,Tianan Cyber Park,#1 Huangjin Road,Nancheng,Dongguan,China

Adhesive Tapes Unwind 122m/Min CI701G Pull Force Tester

...Tester For Pressure Sensitive Adhesive Coated Tapes PT-6088B High Speed Unwind Tester.pdf Application of uncoil tester: The high speed unwinding force tester is used to peel off an entire roll of adhesive tape with high speed and the strength change can be detected and observed. At the same time, the peel force can be analyzed in the process. Follow ASTM D1000 Specification of unwind force tester......

Perfect International Instruments Co., Ltd

Address: 150 Fenxi Road, Shangjia Urban Industrial Park, Building 2, Wanjiang District, Dongguan City, Guangdong Province

YDT757 Galvanized Coating Adhesion Hammer Test Device With Oak Handle

YDT757 Galvanized Coating Adhesion Hammer Drop Test Device Product Overview: This test device conforms to the YDT757 drop hammer test method, and is suitable for hot-dip galvanized coating adhesion test. It uses a hammer to drop freely to hit the sample......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

70mm or 100mm Maximum Sample Width Cylindrical Mandrel Bend Tester

... robust mechanical unit for determining the elasticity, adhesion and elongation of dry paint on metal sheet. Perfect design, the instrument can be adapted to the diameter of the mandrel used. The coated specimens up to 70mm width, are bent perfectly and...

HUATEC GROUP CORPORATION

Address: 7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096

Coating Abrasion Testing Machine Abrasion Resistance Test Precision Component

... ETC electronic devices, to check the anti-abrasion ability and the adhesive ability of coating or silkscreen printing. Feature: Can test abrasion (with alcohol/eraser),and hardness test with pencil drawing at the same time. With many tester cap, jig,...

Infinity Machine International Inc.

Address: No.103 Building 4, Furong Industrial Center, Wangniudun Town, 523200, Dongguan City, China

Submit your “puller adhesion tester for coating” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Infinity Machine International Inc. Products: Coating Abrasion Testing Machine Abrasion Resistance Test Precision Component
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “puller adhesion tester for coating” inquiry

*From:
Your email address is incorrect!
To: HUATEC GROUP CORPORATION
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0