15 Times / Min Socket Plug Tester Electrical Load Testing Equipment With Leakage Protection
|
... mechanical life testing machine and load test chamber composition, in line with IEC884-1 and GB2099 corresponding test requirements. At the same time through the replacement of the test fixture, can do switchboard switchboard, switchboard, nail switch,...
Guangzhou Kinte Electric Industrial Co.,Ltd
|
Office Chair Forefoot Stability Tester Weight Load Test Furniture Test
|
...Tester Weight Load Test Furniture Test PRODUCTS DESCRIPTION The Chair Stability Tester is used to perform the forwards overbalancing test. DESIGN STANDARD: BIFMA 5.1 STANDARD FEATURES: Test Platform: 1800x1000mm The Max. Load force : 150KG The stroke for loading weight: 350mm Compress air : 6kg/cm2 TEST PROCEDURES: a) Apply a vertical load of 61 kg (135 lb.), through the front-stability loading......
Guangdong Haida Equipment Co., Ltd.
|
Three - Position Switch Plug And Socket Life Test Machine Load Test For Plug Socket Tester
|
...IEC60884, IEC61058, IEC606691 standards and etc. It is applicable for household and similar fixed electrical installations switches and plug sockets breaking capacity and normal operation test, the rated voltage of the switch is not greater than 280V and...
Guangzhou HongCe Equipment Co., Ltd.
|
Static Pull Bollard Pull Test Electronic Tensile Tester for Load Endurance RS-8103
|
...Test Electronic Tensile Tester for Load Endurance Model: RS-8103 Application: This tester applies for loading endurance test between plug and cable. It can test 6 specimens at the same time. Fixed the plug pin on the top of the tester then hang the poise onto the cable. Lower down the supporting plate and let poise away from plate. The angle between pulling direction and plug......
Infinity Machine International Inc.
|
Electric Drive Cable Bending Tester For Cable Bending / Swinging / Loading Test
|
... Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC Equipment Description: The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires by fixture and add specific load. During test, the...
KingPo Technology Development Limited
|
IEC 62196 Charging Plug Tester EV Socket Mechanical Test Device Endurance Tester
|
...Plug Tester EV Socket Mechanical Test Device Endurance Tester Complied Standards & Clauses Conforms to IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. Product Overview The servo motor drive mechanism is used to perform linear plug-and-pull repetitive actions on the sample, and an external load can be connected for on-off testing......
Sinuo Testing Equipment Co. , Limited
|
Power Cord Flexing Tester With Load Bank For Non-Rewirable Plugs And Socket-Outlets
|
...Tester With Load Bank For Non-Rewirable Plugs And Socket-Outlets Product Information: This cord flexing test apparatus is designed to perform the required flex endurance testing specified in IEC 60884-1:2022, Figure 21, Clause 23.4. It’s used to precisely evaluates the flexible cable of non-rewirable plugs......
Sinuo Testing Equipment Co. , Limited
|
Electric Cable Testing Equipment For Cable Bending / Swinging / Loading Test
|
...drive Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC 2.Equipment Description: The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires by fixture and add specific load. During test,...
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
High Density Electrical Plug Tester , Socket Plug Gauge 1 Years Warranty
|
...Plug Socket Tester Stainless Steel Plug Socket Gauge 1 years warranty Figure number Description Figure 2.5 Pressure test apparatus for insulation on insulated plug pins at high temperature Figure 2.6 Impact test apparatus for insulation on insulated plug pins at low temperature Figure 2.9 Mounting of plug for temperature rise test Figure 2.10 Pin clamping unit for the temperature rise test......
Pego Electronics (Yi Chun) Company Limited
|
UL817 Wire Swing Tester With 6 Test Positions And 50g 100g 200g 300g 500g Weight
|
... in the grip, and add a certain load, the grip swing around during the test, after a certain number of times, view the disconnection rate; or when it is not energized, check its total number of swing. Standard: • UL817-2009 Technical ......
Advanced Instruments Co.,Limited
|
Submit your “plug tester for load testing” inquiry in a minute :