EN ISO 20344 Shoe Insulation Testing Machine CE
|
...Shoe Insulation Testing Machine / Safety Shoes Sole Insulation Testing Machine / Sole Insulation Testing Machine Use This instrument is a testing machine for testing the thermal insulation properties of the whole shoe. After the sample shoes are placed on a hot plate of a specified temperature for a certain period of time, the temperature rise of the inner surface of the sole is checked. Standards compliant ISO-20344......
SKYLINE INSTRUMENTS CO.,LTD
|
ISO 22650 Shoe Heel Testing Machine Leather Shoes Heel Bonding Tester Textile Testing Machine
|
... bonding testing machine for leather shoes is suitable for leather shoes where the heel is bonded or nailed to the rear upper or the outsole. It is not applicable to molded-bottom leather shoes where the heel and the outsole are integrated as one piece....
DONGGUAN LONROY EQUIPMENT CO LTD
|
ISO 20344 Shoe and Gloves Cut Footwear Testing Equipment , Resistance Testing Equipment
|
... hard materials. A driving rotation round blade under a specified load cuts the glove held by the fixture of tester to and fro. After test, compare it with its original statuses to get the results. Specifications Model GX-5093 Stroke 50 mm Load 5+/-0.05 N...
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
LCD Display ISO 20344 Shoe Testing Machine Martindale Abrasion Tester
|
Martindale Abrasion Tester of footwear vamp material Product Introduction Application: The Martindale Abrasion Tester is used to determine the abrasion resistance of all kinds of footwear vamp material. Samples are rubbed against known abrasion at low ......
Gester International Co., Ltd
|
Shoe Rigidity Testing Machine , Bending Resistance Angle Of 45 Degrees
|
Shoe Rigidity Testing Machine, Bending Resistance Angle Of 45 Degrees Instrument Overview The whole shoe with the zigzag line is installed on the testing machine, and a force of (30±0.5)N is applied to the plane mounted hingedly from the hinge to reach the bending resistance angle of 45 degrees. This assessment determines whether the sole bending test is performed successfully. Compliance Standards Complies with ISO......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
DIN Rubber Abrasion Resistance Tester Shoes Wear Test Machine
|
...) that are subject to abrasive/frictional wear in their actual service, such as tires, conveyor drive belts, and shoes.etc. Design standard: DIN-53516, ISO/DIS-4649, BS903 PART9 and GB-9867. Principle: Under specified touched pressure and given area,...
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
ISO 8142:1990 Maximum Temperature of Thermal Insulation Testing Machine ASTM c411-82
|
ISO 8142:1990 The Maximum Use Temperature of Thermal Insulation Testing Machine ASTM C411-82 Technical Description: Applicable to the evaluation of the maximum service temperature of insulation products such as loosely filled insulation materials, felts, carpets, blocks, plates and prefabricated insulation tubes. Standard: GB/T17430-1998: the evaluation methods of thermal insulation......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
ASTM ISO R300mm Izod Impact Testing Machine With DC Solenoid Control
|
... plastics, ceramics, cast stone, insulation material and other nonmetal materials. It is the ideal test equipment of chemical industrial, R&D institution, universities and colleges, quality testing department and professional manufacturer laboratory....
Guangdong Haida Equipment Co., Ltd.
|
Safety Shoe Tester with 20KN Max Sensor Capacity for Dual Test Function and ISO 20344 Compliance
|
...Shoe Compression & Puncture Resistance Tester is a dual-function test instrument for safety footwear. It can perform compression test for safety shoe steel toe caps and puncture resistance test for shoe soles by changing different fixtures. This machine meets international testing standards including ISO 20344, CAN/CSA-Z195 and GB/T 20991. It is widely used in safety footwear factories, third-party testing...
Dongguan Youbi Test Equipment Co.,Ltd
|
ISO 20344 8.3 Footwear Abrasion Tester For Leather Shoe Soles 2.5N 5N
|
ISO 20344 8.3 Footwear Abrasion Tester For Leather And Shoe Soles 2.5N 5N TEST STANDARD DIN-53516, ISO-4649, GB/T9867, ASTM D5963, ISO 20344 8.3 STANDARD SPECIFICATIONS Technical Index HD-P307 Specimens size 16mm, 6-15mm (D) Fixture load 2.5N Weight load......
Haida Equipment Co., Ltd
|
Submit your “iso 20344 shoe insulation testing machine” inquiry in a minute :