IEC 62196 EV Connector Testing Equipment Breaking Capacity Test Equipment
|
... 62196-3 Ed.4CDV 2020 clause 22 and 23. IEC 60309-1: 2012 clause 20 and clause 21. Equipment Overview This test equipment meets the requirements of IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and...
Sinuo Testing Equipment Co. , Limited
|
IEC 62196-1 Electric Vehicle Terminal Test Equipment For Mechanical Tests On Terminals
|
...-1:2020 clause 13.3.1 fig12, table 3, etc. It is used to process mechanical tests on terminals, for judging whether the design and the structure of the new terminals are fitted with new conductors and of the minimum and the maximum cross-sectional areas is...
Sinuo Testing Equipment Co. , Limited
|
Ф1.0mm Wire IEC Figure 4 Terminal Test Probe D
|
IEC61032 Test Finger Probe Figure 4 Test Probe D With 1mm Diameter Wire Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 4 test probe D. IEC 60529 Degrees of protection provided by enclosures (IP Code......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 62196-1 PLC Electric Vehicle IP5X And IP6X Sand Dust Testing Equipment
|
IEC 62196-1 PLC Electric Vehicle IP5X and IP6X Sand Dust Testing Equipment 1. Introduction: The sand dust testing equipment is applied to test the physical and other related properties of electronic and electrical products, electric vehicle, lamps, ......
Pego Electronics (Yi Chun) Company Limited
|
IEC62196-1 Electric Vehicle Test Equipment For Charging Plug And Socket Cable Flexing
|
...–Conductive charging of electric vehicle-Part1:Charging of electric vehicles up to 250A a.c and 400A d.c" clause 7.11 and clause 7.15 IEC 60309-1:2012 "Plug,socket-outlets and couplers for...
KingPo Technology Development Limited
|
IEC 62196-1 Connection Set Conductive Charging For Electric Vehicles Test Machine
|
IEC 62196-1 Connection Set Of Conductive Charging For Electric Vehicles Test Machine Introduction: IEC 61851-1 specifies electric vehicle conductive charging equipment. This international standard, referred to as the IEC 60309 series in IEC 61851-1, specifies the requirements for plugs, socket-outlets, connectors, inlets and cable assemblies as described in IEC......
Guangzhou HongCe Equipment Co., Ltd.
|
6 Groups Cable Testing Equipment For Plug Static Pull Test , UL / IEC Standard
|
...Testing Equipment For Plug Static Pull Test For UL And IEC Standard 1.Quick Details: Alternative name Plug-line static tensile testing machine Function testing load strength between the plug terminal and power cord Feature Electric drive Weight 310kg Volume 91×55×99cm Test standard UL-817,IEC, GB 2.Product Summary: Plug-line static tensile testing machine is used for testing load strength between the plug terminal......
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
AC220V 50Hz IEC Test Equipment For Checking Wire Conductors Damage
|
... test apparatus for checking damage degree of wire which confirms to many standards such as IEC60884-1 clause 12.3.10 figure 11, IEC60669 and so on. This compliance is used for judging whether the design and the structure of the clamping screw terminal is...
Dongguan Kingpo Technology Limited
|
Stable Appliance Test Equipment Strain Twisting Cord Anchorage Testing Machine
|
... cord, and appliances intended to be permanently connected to fixed wiring by a flexible cord, shall relieve conductors from strain, including twisting, at the terminals and...
shanghai kerang technology co ltd
|
Single Mode Type MM Pigtail 0.9mm 2.0mm Excellent Polished For Test Equipment
|
...tested; (5) Complying with Telcordia ,GR-326-Core, IEC and RoHS Standard. Applications Local Area Network (LAN) Data communication network Telecommunication optical transmission network Optical access network(OAN) Active device termination Fiber optics data transmission(FODT) Test Equipment......
Hubei Chenyu Photoelectric Technology Co., Ltd.
|