Hot-dip Galvanized Frame Scaffolding System with 10kN - 35kN Load Capacity and Adjustable Height Construction Platform

The Heavy Duty Frame Scaffolding System is a modular construction scaffolding solution for masonry, painting, maintenance, renovation, and general building work. It combines H frames, horizontal members, cross braces, connectors, and steel planks to create an elevated work platform for repeated project use.

This frame scaffolding system features open bays, cross-brace reinforcement, and a perforated steel plank platform. Components can form an individual bay or longer run after confirming the site layout and accessories.

The frame scaffolding components use formed steel tubes, welded joints, and fitted connection points. Cross braces improve alignment and rigidity. Steel planks provide a working surface with raised perforations.

Vertical frames transfer loads toward the foundation, while horizontal members maintain bay geometry. Diagonal braces reduce sway and keep the construction scaffolding square. The steel plank distributes tools and personnel loads.

Suitable for masonry, wall finishing, painting, indoor scaffolding, exterior maintenance, commercial construction, renovation, and industrial repair. Ideal for contractors requiring repeatable frame components and adjustable working levels.

• Modular frame structure simplifies layout planning, installation, and storage
• Cross braces improve bay rigidity for enhanced stability
• Steel plank creates a practical, durable work surface
• Standardized components support inventory organization and reuse

We support component selection, configuration review, packing confirmation, and project planning. Confirm required height, bay length, platform type, quantity, coating, and destination before ordering.

Steel tubes are cut, formed, welded, inspected, surface-finished, and packed by component type. Dimensional and visual checks maintain consistent frame connections.

Prepare a level foundation, install base supports and frames, connect horizontal members, fit diagonal braces, secure steel planks, and add guardrails, ties, or access components required by the approved design.

• Use trained personnel and suitable personal protective equipment
• Inspect every connection, brace, plank, and foundation before use
• Never exceed the verified project load limit
• Do not modify the structure without approval
• Do not use the scaffold during unsafe weather conditions

We focus on consistent frame scaffolding production, component matching, visual inspection, and practical project support. Final specifications, safety calculations, and local compliance requirements should be confirmed for every application.