A4VSO180EO2/30L-PPB13N00 Variable Displacement Piston Pump
The Rexroth A4VSO180EO2/30L-PPB13N00 is a genuine German-produced open-circuit axial piston variable
pump from the proven A4VSO series. It features EO2 electro-proportional displacement control, allowing pump flow to be set remotely via an analog electrical
signal (±10 V or 4-20 mA) from a PLC or CNC controller.
With a displacement of 180 cm³/r and PPB13 SAE flange & port configuration (compact smaller SAE porting vs. PPB25), this model is ideal for
space-limited hydraulic power units and automated machinery
requiring precise, programmable flow without manual adjustment. It
is rated for 350 bar continuous / 400 bar peak operation.
Technical Specifications
| Parameter | Value |
|---|
| Manufacturer | Rexroth, Made in Germany |
| Series | A4VSO - Open Circuit Swashplate Axial Piston Variable Pump |
| Model Code | A4VSO180EO2/30L-PPB13N00 |
| Geometric Displacement (Vg max) | 180 cm³/r |
| Nominal Pressure | 350 bar |
| Peak Pressure | 400 bar |
| Maximum Speed (nnom) | Approx. 1800 rpm |
| Theoretical Flow @1500 rpm | Approx. 270 L/min |
| Theoretical Flow @1800 rpm | Approx. 324 L/min |
| Drive Power @350 bar & 1500 rpm | Approx. 158 kW |
| Control Type | EO2 - Electro-Proportional Displacement Control (electric signal sets swashplate angle / flow) |
| Rotation | L - Left-hand (viewed from shaft end) |
| Flange & Port | PPB13 - SAE Flange & SAE Port (compact porting) |
| Through Drive | N00 - Without Through Drive (tandem-ready variants available on
other A4VSO sizes) |
| Hydraulic Fluid | Mineral Oil HLP, HFC Water-Glycol Permissible (Derated) |
| Approximate Weight | 102-103 kg |
EO2 Electro-Proportional Control - Key Advantage
Unlike pressure-compensated (DR) or pilot-controlled (DFR) pumps, EO2 enables electric flow command:
- Pump displacement — and therefore flow — follows a linear analog
input signal
- Enables fully automated, software-controlled hydraulic systems
- Eliminates manual flow-setting valves in many applications
- Fast-response proportional solenoid for dynamic processes
- Compatible with external pressure limiting or cut-off for system
safety
Typical Applications
- Automated production lines with PLC-controlled hydraulic cycles
- Hydraulic test benches & calibration rigs requiring programmable
flow
- Material testing machines (tensile/compression) with
servo-hydraulic actuation
- Packaging & converting machinery with variable flow demand
- R&D laboratory hydraulic systems and university engineering
labs
- Retrofit projects upgrading manual/displacement-controlled pumps to
electronic control
Global Sales Countries / Regions
Distributed through Rexroth's authorized global dealer network,
including:
- Europe: Germany, Italy, France, UK, Spain, Netherlands, Austria,
Switzerland, Poland
- Asia-Pacific: China, Japan, South Korea, India, Taiwan, Thailand, Malaysia,
Vietnam, Australia
- Americas: USA, Canada, Mexico, Brazil, Chile (industrial regions)
- Middle East & Africa: UAE, Saudi Arabia, Turkey, South Africa
Frequently Asked Questions
Q1: What is the difference between PPB13 and PPB25 on A4VSO180
pumps?
A1: Both use SAE flanges and ports. PPB13 has the smaller SAE port
size for compact manifold integration; PPB25 uses larger SAE ports
for higher-flow piping. Pump displacement, pressure and flow
performance are identical — select based on your manifold/hose
standard.
Q2: Does EO2 control require additional electronic components?
A2: Yes. An external proportional amplifier (e.g. Rexroth
VT-series) or a PLC analog output card is required to supply and
monitor the command signal to the EO2 solenoid. Some versions
include onboard electronics — verify with your supplier.
Q3: Can this pump be used in a closed hydrostatic transmission?
A3: No. The A4VSO series is for open circuit (open loop) only. For closed-loop track or wheel motor drives, use the A4VG or
A4VM series.
Original Imported Rexroth Germany 28cc Displacement High Pressure Piston Pump with 100% Tested Great Performance and Up to 80°C Operating Temperature
