FEC-1361 Epoxy Curing Agent Equivalent to Ancamine 2726

FFC-1316 Epoxy Curing Agent Equivalent to Ancamine 2726

PROFILE

FEC-1361(Equivalent to Ancamine 2726) is a mixed amine-modified hardener.

PROPERTY

Corrosion-resistant, low viscosity, high gloss, fast reaction.

APPLICATIONS

Used for floor topcoat.

INDEX

Basic data is based on the E-51 epoxy resin (E-51 is bisphenol A type, with an epoxy equivalent of 180-190).

CURING CHARACTERISTICS

1. Curing exotherm:

FEC-1316 was mixed with Bispheno1-A epoxy resin with an oxygen equivalent of about 190, with a total weight of 150g. The curing exotherm measured at a room temperature of 23℃ is shown in the table below:

2. Curing and drying properties:

FEC-1316 was mixed with Bispheno1-A epoxy resin with an oxygen equivalent of about 190 according to a certain ratio. The curing and drying properties were measured using an RCI drying tester at 23°C and 5°C, as shown in the following table: Dry film thickness: 150µm

3. Physical properties after curing:

YD-8252 was mixed with Bispheno1-A epoxy resin with an oxygen equivalent of about 190, and after a 7-day curing period at a room temperature of 23℃, the physical properties measured are as follows.(Based on JIS K6911)

PACKING

25Kgs/Drum(plastic drum), 200Kgs/Drum(carbon steel drum)

SHELF LIFE

Packaged in plastic or carbon steel containers, protected by nitrogen, and stored sealed at room temperature. The shelf life is one year.

STORAGE

Should be sealed in the original packaging container and placed in a dry place at 0-40℃ (the temperature cannot be lower than 0℃). Do not place it in the sun.

NOTICE

Please take safety precautions when using this product and refer to the Product Safety Data Sheet (SDS).

Contact Now

Feiyang Protech Corp., Ltd. specializes in researching and producing polyaspartic polyurea resin and other new chemical products. We are recognized as a "National Special New Key Little Giant" and a "State-level High-tech Enterprise", with more than 50 polyaspartic polyurea invention patents. We also participated in the preparation of 13 industry standards for polyaspartic polyurea materials as a leading company in this field, ranking No.1 in the Chinese market.

In the coating industry, polyaspartic polyurea is used in construction machinery, automobile, containers, fan blades, marine heavy corrosion protection, and high-end industrial and commercial floor coatings. In the adhesive field, it is mainly used in sealants, stone adhesives, electronic adhesives, film circuit packaging adhesives, and other high-end applications. In the waterproofing materials sector, it is primarily used in hydroelectric dams, water parks, building waterproofing repair materials, and other areas. In the structural materials field, it is applied to curling tracks, artificial ice skating rinks, and other structural materials.

Polyaspartic polyurea is considered a high-end new material in the strategy of manufacturing power. We have broken the foreign technology monopoly and filled the domestic market gap. Due to its comprehensive characteristics of "Environmental protection, Energy saving, and Long durability", polyaspartic polyurea can contribute to the realization of genuine carbon neutrality in the coatings, adhesives, and materials industries.

Since 2012, Feiyang polyaspartic ester resin has been supplied overseas. It has been widely used to replace Bayer's current polyaspartic system in many coating companies and has been applied in anti-corrosion and waterproofing by international coating companies.