UL94 V0 Polyurethane Potting Compound For Home Electronics Protection 6801

UL94 V0 Urethane Potting Resin for Home Electronics Protection

Product Description

BZ-6801 is a two-component, halogen-free transparent polyurethane potting compound designed for home electronics control systems. Featuring repairable properties, low-stress curing, and excellent fluidity, it holds UL Yellow Card Certification QMFZ2.E352175 for UL94 V0 flame retardancy (3.0mm). Operating across -60℃ to 120℃, it provides IP67 waterproof sealing, high dielectric strength, and complies with RoHS and REACH. Its 1:1 weight mix ratio suits both manual and automated processes.

Key Product Features

1. UL94 V0 Flame Retardancy -UL Yellow Card QMFZ2.E352175 certified, passes vertical burn tests for critical fire safety
2. Wide Temperature Adaptability – Stable performance from -60℃ to 120℃, reliable under extreme conditions.
3. IP67 Waterproof Protection – Seals against water immersion and dust, low water absorption (≤0.5%) prevents moisture failures.
4. Transparent & Repairable – Clear post-cure inspection, repairable for easy component replacement and maintenance.
5. Low-Stress Curing – Minimizes internal stress, protects sensitive chips and solder joints.
6. User-Friendly 1:1 Mix Ratio – Simplified operation for manual or automated potting, pot life 28-36min at 25℃, surface dry 3-5h, full cure 4-6h, high fluidity for complex assemblies.
7. Global Compliance – Meets RoHS, REACH, and halogen-free standards.

Technical Parameters

Product Applications

1. Washing Machine Control Boards: Protects against water splashes and electrical short circuits, ensuring stable operation in high-humidity laundry environments.
2. Dishwasher Control Systems: Withstands high-temperature steam and detergent corrosion, maintaining reliable performance during repeated wash cycles.
3. Smart Toilet Control Panels: IP67 waterproof sealing prevents water damage, supporting long-term use in bathroom environments.
4. Robot Vacuum Control Modules: Vibration resistance and wide temperature adaptability ensure stable navigation and cleaning performance across home surfaces.
5. General Home Electronics: Versatile protection for air conditioner controllers, smart lighting drivers, and small appliance power supplies, extending product lifespan.

Directions for Use

1. Pre-potting Preparation: Calibrate scales, prepare potting tools, cleaning tools, check machine settings, check vacuum pump force, etc.
2. Product Pre-treatment: Place product on a level surface or fixture. Remove dust, clean, degrease, and dry if necessary.
3. Accurate Proportioning: Manual operation requires precise mixing according to the specified ratio and recording. Machine potting requires calibrated ratios and first-article confirmation is recommended.
4. Mixing & Stirring: Manual operation requires thorough stirring or using electric stirrers to ensure homogeneous mixing. Machine potting requires sufficient stirring speed, adjust as needed.
5. Uniform Potting: Manual operation should be done in small, multiple batches to ensure uniformity. Machine potting should follow the programmed path for quantitative dispensing.
6. Inspection or Secondary Potting: After potting, visually inspect as needed. Perform touch-up, bubble removal, or secondary potting if required.
7. Curing: Allow the potted and inspected products to cure at room temperature or with heat assistance (recommended 60°C if needed), according to product and process requirements.
8. Final Product Confirmation: Perform visual inspection and performance testing as required by the customer.

Packing

1. Hardener: Typically 5KG/10KG/25KG/200KG metal or plastic drums.
2. Resin: Typically 25KG/200KG metal or plastic drums.