Product Details
Company Profile

RDF Briquette Press Machine for Wood Sawdust Cardboard Textile Waste

Municipal Garbage Wood Sawdust Briquette Press Cardboard Clothing Textile Paper Rdf Briquetting Machine Line

Products Description

The combustible briquetting machine belongs to the category of biomass energy utilization equipment or industrial solid waste treatment equipment. It converts loose combustibles (such as agricultural and forestry wastes, industrial organic wastes, domestic organic wastes, etc.) into high-density (usually 1.0-1.5g/cm³) and stable calorific value fuel blocks through physical compression (cold pressing or hot pressing). It is widely used in boiler combustion, biomass power generation, home heating and other fields, and is a key equipment for realizing "waste energy".

Product Features

Refuse-derived fuel (RDF) technology is a technology that crushes and sorts domestic and industrial waste to remove non-combustible materials such as metals, glass, and sand from the garbage. After crushing and drying the combustible materials in the garbage (such as plastics, fibers, rubber, wood, food waste, etc.), additives are added, and densely molded to finally make solid fuel.

Model	Power(KW)	Number of ring die holes	Capacity(t/h)	Dimensions(mm)
YDRK-54	90	54	1.5-2.5	2200×1100×1700
YDRK-72	132	72	3-4	3230×2200×2000
YDRK-120	185	120	4-5	4055×2836×2380

Applicable raw material range
The raw materials of the combustible briquetting machine must have a certain degree of combustibility (low calorific value is usually ≥3000kcal/kg), and common types include:

Agricultural and forestry waste: straw (corn stalks, wheat stalks, rice stalks), rice husks, wood chips, sawdust, fruit tree branches, bark, sugarcane bagasse, etc.;
Industrial organic waste: wine lees, medicine residues, papermaking black liquor residues, food processing waste residues (such as fruit shells, fruit cores), textile waste fibers, etc.;
Domestic organic waste: kitchen waste (needs pretreatment dehydration, impurity removal), peels, fallen leaves, etc. (needs to control the impurity content to avoid corrosion of equipment);
Low-grade fuel: some coal gangue, oil shale (needs to be crushed to a suitable particle size and then briquette to improve combustion efficiency).

Product Application

Key performance characteristics of Rdf briquetting machine:

Wide adaptability of raw materials: can handle a variety of combustible wastes, and adapt to different raw material characteristics (such as high moisture, high viscosity) by adjusting the mold size, pressure parameters or adding impurity removal devices.

High molding density: The density of the molding block can reach 1.0-1.5g/cm³ (the density of loose raw materials is only 0.1-0.2g/cm³), the volume is reduced by 5-10 times, and the transportation efficiency is greatly improved (such as the freight per ton of straw after briquetting is reduced by more than 70%).
Combustion performance optimization: During the compression process, part of the lignin softens and bonds, and the calorific value of the molded block can reach 3500-5000kcal/kg (close to standard coal), and the combustion is continuous and stable (no "floating ash" phenomenon of loose raw materials), which is suitable for industrial boilers, power plants and other scenarios.
High degree of automation: High-end models are equipped with a PLC control system, which can automatically adjust the feeding speed, pressure, and temperature, reduce manual intervention (only 1-2 people are required to operate), and reduce labor intensity.
Environmental protection and energy saving: The equipment has good sealing performance, and the dust emission complies with the "Comprehensive Emission Standards for Atmospheric Pollutants"; some models use waste heat recovery technology (such as using the waste heat of the molded block to dry the raw materials) to reduce energy consumption.

Raw material pretreatment requirements:

Water content: usually controlled at 12%-20% (depending on the equipment design, too high will lead to difficult molding or fuel mold, too low will rebound easily during compression);
Particle size: generally needs to be crushed to ≤50mm (some equipment requires ≤20mm), which can be pre-processed by crusher or pulverizer;
Impurities: hard objects such as metal, stone, glass, etc. need to be removed (especially hydraulic equipment, to avoid damage to the mold).

Waste to Biomass/RDF/SRF/TDF Briquette System:

The solid waste disposal system can be customized according to the actual materials.


MSW to RDF briquette Plant	Industrial Waste to RDF briquette Plant

Biomass pellet/briquette Plant	Waste Tire Disposal System

Case:

Product Tags:


*From:	Your email address is incorrect!
*To:	Henan Xrido Environmetal Protection Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Briquetting Machine
Brand Name:	Xrido
Model Number:	Customizable
Certification:	CE ISO TUV
Payment Terms:	Negotiable
Delivery Time:	2-30 Working Days
place of origin:	Henan, China
type:	Refuse Collector
warranty:	1 Year
material:	Export Wooden Packing
machinery test report:	Provided
video outgoing-inspection:	Provided
core components:	Pressure vessel, motor, Bearing, Gear, PLC, Pump, Engine
Power:	Custom
Product name:	Refuse Derived Fuel RDF Briquette Press Machine
Application:	Recycling and Utilization of Waste Wood
After Warranty Service:	Field Maintenance
Advantage:	Easy Operation High Efficiency
Briquette size:	8-75mm
Usage:	Make Fuel Briquettes
Production Capacity:	100%
Voltage:	Country Voltage


Waste Metal Recycling System	Electronic Waste Recycling System

Solid Waste Disposal System	RDF Briquetting System


Scrap Metal Shredder Sorting Line	Waste Aluminum Crushing Production Line

Water Radiator Crushing Sorting Line	UBC Aluminum Cans Decoating Machine