Product Details
Company Profile

35W CC 500mA to 900mA DALI2 dimmable slim LED current driver with 5-year warranty

Product Description

Built-in DALI2 protocol, no flicker in full dimming range
Primary Push dimming function with state memory
Short circuit / over temperature / over voltage protection
Standby power consumption ≤ 0.5W
5-year warranty

Specifications

Input	Operating Voltage	198-264VAC 50Hz/60Hz
	Rated Input Voltage	220-240VAC 50Hz/60Hz
	DC Input Voltage range	200-240VDC
	Input Cuttent	0.2A Max.
	Input Inrush Current	<10A (Half current pulse width 100US) @230VAC
	Power Factor	≥ 0.95 (@230Vac,100% load)
	Total harmonic distortion	Typical: 15% (@230Vac, 100% load)
	Stand-by Power	≤0.5W (@230Vac when PUSH or DALI turns off)
	Efficiency	87%Max (@230Vac,100% load)
	Wiring Method	Push terminal, wire cross section:0.75-1.5mm²
	Automatic circuit breaker (Calculate current in the wire)	type	B10	B13	B16	B20	B25	/
		Number	25	30	40	50	60	/
		type	C10	C13	C16	C20	C25	C32
		Number	40	55	60	80	105	130
Output	Operating mode	Constant Current
	Load type	LED
	Flickering / Flickering-Free	Flicker value: less than 2% for the whole dimming range
	Start-up time	<1s (@230Vac)
	No-load output voltage	65VDC Max.
	Load output voltage range	12-48VDC
	Full load output power	35W Max.
	Load output current	500~900mA : For details<Current gear setting>
	Constant current/voltage Precision	Constant Current Precision ±5%
	Wiring method	Push terminal, wire cross section:0.75-1.5mm²
Control Method	Primary PUSH Dimming	Primary PUSH dimming (Max.lead length:20M)
	Dimming Range	Primary PUSH & DALI dimming: 0%-100% 1-10V dimming:2%-100%
	DALI Dimming	DALI dimming (Max.lead length:300M)
Exception Protection Requirements	Output over temperature protection	Yes, without a self-recovery function(Can be inquired)
	Output short circuit protection	Yes, without a self-recovery function(Can be inquired)
Operating Environment	Operating temperature/ humidity	-25℃~50℃ Humidity:85% (Non-condensing)
	Storage temperature/ humidity	-40℃~80℃, Humidity:10%–95%
	Max. case temp(Tc)	85℃
Safety & EMC	EMC standard	EN55015 EN61547 EN61000-3-2 EN61000-3-3
	DALI protocol standard	IEC62386-102 IEC62386-207 DT6
	Safety standard	EN61347-1, EN61347-2-13, EN62493, EN60598-1
	Certification	CE
	Withstand voltage	3750Vac, 5mA, 60s (Input “L N”- Output “SEC”)
Others	Degrees of protection	IP20
	Type of protection	Class II
	Installation type	Independent installation
	Installation dimension	1237924mm
	Blackout memory function	Yes, PUSH blackout memory
	PUSH dimming synchronization	Parallel: 15 units Max. Series: 25 units Max.
	Packaging requirement	white box+ Instructions Clapboard Outer Carton(K=A)
	Weight	132g
	Life	5 years guarantee @Ta full load
Note: All parameters are tested at the input voltage of 230VAC and a 25-degree environment unless specified.

Dimension:

Wiring Diagram

1) PUSH Dimming wiring diagram

2) DALI wiring diagram

Current Gear Setting

Current(mA)	DIP			Pomax(W)	Uout(V)
Current(mA)	1	2	3	Pomax(W)	Uout(V)
500	-	-	-	24	12～	48
550	ON	-	-	26.4	12～	48
600	-	ON	-	28.8	12～	48
650	-	-	ON	31.2	12～	48
700	ON	ON	-	33.6	12～	48
750	ON	-	ON	34.5	12～	46
800	-	ON	ON	35	12～	44
900	ON	ON	ON	35	12～	39

ON/OFF & Description of Dimming Operation

A. Short-press the PUSH switch (short press time 0.1S-1S), the LED driver will turn on or off.

B. Dimming: Press and hold the PUSH switch (1S-8S), the LED driver can achieve dimming, brightening, or dimming, the dimming range is 2-100%.

C. Memory: PUSH dimming has a dimming memory function.

D. Dimming synchronization: The power connected to the same PUSH switch can be synchronized by pressing and holding the PUSH switch for longer than 15 seconds.

E. DALI dimming mode: Connect the power supply to the DALI system, and it can be dimmed by the DALI host. The dimming range is 0-100%.

Important Notes

1) The LED string must be connected to the load before turning on the input power; otherwise, the LED string may be damaged.
2) After the LED drive input is powered off, there will be a residual voltage at the output, which can be maintained for about 3 minutes.

35W CC 500mA to 900mA DALI2 dimmable slim LED current driver with 5-year warranty

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen Merrytek Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	DALI2.0 Dimmable LED Driver
Brand Name:	Merrytek
Model Number:	KL35C-PDii
Certification:	CE / RoHS
Place of Origin:	China
MOQ:	100pcs
Price:	Negotiation
Payment Terms:	T/T or western Union
Supply Ability:	10,000pcs per month
Delivery Time:	1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.
Packaging Details:	Packed in bubble bag firstly, and then reinforced with carton for outer packing
Approvals:	CE, REACH, ROHS
Rated Voltage:	220-240V AC 50Hz /60Hz
Product Name:	DALI 2.0 Dimmable led current driver
Full Load Output Power:	35W max
Load output voltage:	12-48V
Dimming Mode:	DALI, PUSH
Working Temperature:	-25℃-50℃
Output current:	500/550/600/650/700/750/800/900mA