Xhorse Multi Prog Adapters Kit 9 Pieces for Third-Party Automatic HEX ECU TCU Programmer

Xhorse Multi-PROG Multi Prog ECU TCU Programmer With Xhorse Multi Prog Adapters Kit 9 Pieces for Third-party Automatic HEX

Bunding Package: Xhorse Multi-PROG Multi Prog ECU TCU Programmer + Xhorse Multi Prog Adapters for EEPROM and FLASH 9pcs/set

Xhorse Multi-Prog Programmer Pro-level ECU TCU Programmer

The XDMPG0GL Multi-Prog ECU Programmer is a versatile tool meticulously designed by Xhorse to access and modify crucial data stored in a vehicle's Engine Control Unit (ECU) and Transmission Control Unit (TCU). From engine maps to transmission parameters and immobilizer settings, the XDMPG0GL ECU Programmer empowers users with unprecedented control and customization.

1.Fully Replace VVDI Prog:
Multi-Prog support factory usage mode for batch programming of chips. In this mode, the functions of batch programming, offline programming, and file offline programming can be done easily.
The main difference between VVDI PROG and Multi-Prog: Multi-Prog has the batch programming function but VVDI PROG programmer doesn't.
2. With Free MQB48 License and BMW Bench Read ISN.
Bind with Xhorse VVDI2/ Key Tool Plus PAD account, then your VVDI2/Key Tool Plus PAD can use MQB48 Function too
3. Read, Write and Clone ECU
4. Read, Write and Clone Gearbox TCU
5. Read EEPROM, ECU, MCU
6. Read and Write Bosch ECU ISN with new Bosch ecu adapter
7. Supports Checksum correction for some EDC16/EDC17 ECUs (more to come)
8. Get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service
9. With built-in free MQB48 license. Bind Multi-prog and VVDI2 (full version) or key tool plus to the same Xhorse app account to use MQB48 NEC35XX function.
10. Free software and firmware update timely.
11. NEW! Add VAG MQB RH850 dashboard processor (Need Extra Xhorse XDMPR8GL MQB-RH850/V850 Adapter )
12. Also Compatiable with Xhorse MQB Solder-free Adapters
13. Can work with Xhorse Multi-Prog Exclusive Adapters 4 in 1 to extend more chip reading and writing.
15.Xhorse Multi-Prog Free Software Download

Other Features:

Support R&W lots of chips, include MC9S08 series, MC68HC(9)12series, MC9S12series, V850series, H8Xseries, R8Cseries, PCF79XXseries and most eeprom chips etc .
Support chip data verify, checkblank function
Support data file compare function
Free Pin code calculation service by Dump for various models
Support Read and Write BMW N20, N55 ECU (show ISN directly)
Stable Read and Write MC9S12XE series chips (5M48H/ 1N35H/ 2M53J/ 3M25J etc.)
Support renew PCF79XX remote, currently support BMW E/F series (Please Note PCF79XX adapter is optional)
Has the largest database of connection diagram
Reserve Ports: For future update
Supports Repair Porsche 12V lithium battery and BYD Lithium Battery (MC9S12XET256)
Supports EDC17/MED17 data calculation (checksum correction)
Support for third-party automatic HEX editing scripts
Supports Expert mode: batch write chips. vvdi prog only write a single chip at a time



Xhorse Adapter for EEPROM and FLASH Work with Multi Prog 9pcs/set

Package includes adapters XDMP03GL, XDMP09GL, XDMP10GL, XDMP11GL, XDMP12GL, XDMP16GL, XDMP15GL, XDMP14GL and XDMP13GL
These soldering boards support Reading & Writing of common EEPROM and FLASH chips.

XHORSE XDMP03GL Adapter EEPROM&FLASH Soldering Board Supports Reading & Writing of common EEPROM and FLASH chips.
XHORSE XDMP09GL Adapter TSOP56 Adapter Chip holder (Footprint:TSOP56) reads and writes, performs FLASH
XHORSE XDMP10GL Adapter PQFP80 Adapter AM29BDD160G (Footprint:PQFP80) Reads and Writes
XHORSE XDMP11GL Adapter Support ATMEGA103 (Footprint:TQFP64) Reading and Writing
XHORSE XDMP12GL Adapter MLF28 Adapter Support ATMEGA88PA(Footprint:MLF28) Reading and Writing
XHORSE XDMP13GL Adapter TQFP32 Adapter Support ATMEGA88PA(Footprint:TQFP32) Reading and Writing
XHORSE XDMP14GL Adapter TQFP44 Adapter Support ATMEGA163(Footprint:TQFP44) Reading and Writing
XHORSE XDMP15GL Adapter TQFP100 & ATMEG Adapter Support ATMEGA3250(Footprint:TQFP100) Reading and Writing
XHORSE XDMP16GL Adapter SOP48 Adapter: Support ATMEGA3250(Footprint:TQFP100) Reading and Writing

Package includes:

1pc x Multi-PROG
1pc x USB Cable
1pc x Power Adapter (15V 4A)
1pc x 220V Power Cord
1pc x VH13 Interface Adapter Board
1pc x VH20 Interface Adapter Board
1pc x VH23 Interface Adapter Board
1pc x MCU Adapter Multi-PROG Solder Cable
1pc x MCU DB15 Adapter Cable
1pc x ECU Adapter Multi-PROG Solder Cable
1pc x ECU DB15 Adapter Cable
1pc x Multi-PROG OBD Cable
1pc x USB WIFI Network Card
1pc x Product Manual
1pc x Certificate Of Conformity
43pcs x ECU Cable Plugs

1pc x XDMP03GL
1pc x XDMP09GL
1pc x XDMP10GL
1pc x XDMP11GL
1pc x XDMP12GL
1pc x XDMP13GL
1pc x XDMP14GL
1pc x XDMP15GL
1pc x XDMP16GL

JIU TECH Enterprise Co., Ltd specializes in development and production of auto diagnostic scanners and auto maintenance tools for years. We provide better quality products and service for our clients. OEM, ODM manufacturing service for business all over the world is appreciated. Our products have been delivered to Europe, America, Africa and Oceania, all over the world, bringing us annual export sales of $2 million last year.

 Emphasis on product quality

We develop and manufacture auto diagnostic tools, car keyless remote controller, car key shell, transponder key, remote key, remote control duplicator and other auto maintenance tools etc. To ensure the consistency of our product quality, Our QC members with five years' experience on average monitor the entire production process.

We also offer a one year warranty.

Emphasis on Management
We insist on high standard, scientific development thoughts, devoted to pursuing continuous creativity of technology and management. Relying on the advanced equipments and high & stable quality, We have been approved by ISO9001:2000, FCC, CE. We benefit all our customers without any trouble of product quality.

We possess an 800-square-meter factory equipped with five production lines. Our advanced equipment includes automatic chip SMT lines, dust-free vacuum refilling machines and dust-free vacuum packaging machines. We produce 1, 000 units every month. Our delivery lead time is just one or three working days for our standard products. OEM products lead time is only within 2 weeks..

Providing best products and best service is our company target. Contact us today by email or phone and start with a small order, you will find we are your most valuable cooperator.