Keithley 2460 Source Measure Unit ,100V 7A 100W SourceMeter Instrument

Key Features of Keithley 2460

• One tightly coupled instrument that combines capabilities from analyzers, curve tracers, and I-V systems at a fraction of their cost
• Wide coverage up to 105 V, 7 A DC/7 A pulse, 100 W max.
• Five-inch, high resolution capacitive touchscreen GUI
• 0.012% basic measure accuracy with 6½-digit resolution
• Source and sink (4-quadrant) operation
• Four “Quickset” modes for fast setup and measurements
• Context-sensitive help function
• Front panel input banana jacks; rear panel input mass termination screw connections
• 2460 SCPI and TSP® scripting programming modes
• Front-panel USB 2.0 memory I/O port for transferring data, test scripts, or test configurations

Learn Faster, Work Smarter, Invent Easier

The 2460 features a five-inch, full-color, high resolution touchscreen that supports intuitive operation, helps operators become familiar with the instrument quickly, and optimizes overall speed and productivity. A simple icon-based menu structure reduces the number of steps required to configure a test by as much as 50 percent and eliminates the cumbersome multi-­layer menu structures typically used on soft-key instruments. Built-in, context-sensitive help supports intuitive operation and minimizes the need to review a separate manual. These capabilities, combined with the 2460’s high versatility, simplify its operation in both basic and advanced measurement applications, regardless of the user’s previous experience in working with SMU instruments.

Specification of Keithley 2460

• Max. Output Power
• 100 W, four-quadrant source or sink operation.
• Source Limits
• Vsource: ±7.35 V (≤7 A range), ±10.5 V (≤5 A range), ±21 V (≤4 A range), ±105 V (≤1 A range).
• Isource: ±7.35 A (≤7 V range), ±5.25 A (≤10 V range), ±4.2 A (≤20 V range), ±1.05 mA (≤100 V range).
• Overrange
• 105% of range, source and measure.
• Regulation
• Voltage: Line: 0.01% of range. Load: 0.01% of range + 100 µV.
• Current: Line: 0.01% of range. Load: 0.01% of range + 100 pA.
• Source Limits
• Voltage Source Current Limit: Bipolar current limit set with single value. Min. 10% of range.
• Current Source Voltage Limit: Bipolar voltage limit set with single value. Min. 10% of range.
• V-Limit / I-Limit Accuracy
• Add 0.3% of setting and ±0.02% of reading to base specification.
• Overshoot
• Voltage Source: <0.1% typical (full scale step, resistive load, 20 V range, 10 mA I-Limit.
• Current Source: <0.1% typical (1 mA step, RLoad = 10 kΩ, 20 V range).
• Range Change Overshoot
• Overshoot into a fully resistive 100 kΩ load, 10 Hz to 20 MHz BW, adjacent ranges: <250 mV typical.
• Output Settling Time
• Time required to reach 0.1% of final value after command is processed and output slew, 20 V range, 100 mA
• I-Limit: <200 µs typical.
• Maximum Slew Rate
• 1 V per µs, 100 V range, 100 mA limit into a 20 kΩ load (typical). 0.6 V per µs, 20 V range, 100 mA limit into a 20 kΩ
• load (typical).
• Over Voltage Protection
• User selectable values, 5% ±0.5 V tolerance. Factory default = none.
• Voltage Source Noise
• 10 Hz–20 MHz (RMS): <4.5 mV typical into a resistive load.

Specifications

Voltage Specifications

1, 2

Current Specifications

1, 2, 5