Conventional Linear Infrared Beam Detector

Attentions :

1. If the ceiling height is less than 8 meters, the beam detector should be installed 0.5 meter to 1 meter below the ceiling level.
2. If the ceiling height is more than 8 meters, the beam detector should be installed 0.5 meter to 1 meter below the ceiling level
3. The chosen for the location should be clean and dry and not subject to shock, vibration and free from glass wall, sunlight direction any reflective barrier.
4. Make sure that the beam path is free form obscuration against moving items.

Install the beam detector

The detector and reflective mirror are installed on both ends of the protected space and in the same horizontal line.

1. Attach the detector bracket to the wall where the detector is to be installed and mark the position of the mounting hole.
2. Punch holes in the marked position, and install φ6 plastic expansion tube in the holes.
3. Mount bracket to the wall with four ST3.5*25FA tapping screws.
4. Remove the top cover of the detector, loosen the waterproof connector, and put the wire into the waterproof connector from the back of the detector. The length of the penetration part should be convenient for the wiring of the detector.
5. Fix the detector base on the bracket with two M4*12*10 screws

Product Range

Conventional Fire Alarm System
Addressable fire alarm system
Gas Extinguishing control system
Beam Detector
4 wire smoke detectors with relay output.
2 wire Conventional smoke and heat detectors
Explosion-proof flame detector for fire alarm system
Standalone smoke detectors and combustable gas detector


Service

1. OEM &ODM service.
2. Provide technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.