Bosch Rexroth Axial piston variable pump A10VSO Series 32 Construction machinery, agricultural machinery, forestry machinery

For more detailed parameters of A10VSO and other models, please contact our sales staf

Characteristics
▶▶ Variable pump with axial piston rotary group of swashplate
design for hydrostatic drives in open circuit
▶▶ Flow is proportional to the drive speed and displacement.
▶▶ The flow can be infinitely varied by adjusting the swashplate
angle.
▶▶ Hydrostatic unloading of the cradle bearings
▶▶ Connection for measuring sensor on the high-pressure port
▶▶ Low noise level
▶▶ Low pressure pulsation
▶▶ High efficiency
▶▶ High resistance against cavitation, loss of suction
pressure and case pressure peaks
▶▶ Universal through drive

Safety instructions

- The A10VSO pumps are designed for use in open circuits.

- Project planning, assembly and commissioning of the axial piston units must be carried out by qualified personnel.

- Before using the axial piston units, please read the corresponding instruction manuals in full.

- If necessary, request these manuals from Bosch Rexroth.

- During and shortly after operation, there is a risk of burns from the axial piston units (especially the solenoids). Take appropriate safety measures (e.g. wear protective clothing).

- Depending on the operating conditions of the axial piston unit (operating pressure, oil temperature), the characteristics may change.

- Working line ports:

· The ports and fixing threads are designed for the maximum specified pressure. The machine or system manufacturer must ensure that the safety factors of the connecting elements and lines meet the specified operating conditions (pressure, flow, hydraulic oil, temperature).

· The working line ports and function ports are designed only for hydraulic lines.

- Pressure cut-off and pressure control do not provide overpressure protection. A separate pressure relief valve is provided in the hydraulic system.

- The data and instructions contained here must be observed.

- The product is not certified as a component for the general machine safety concept requirements in accordance with DIN EN ISO 13849.

- The following tightening torques apply:

· Connectors:

For the tightening torques for the connectors used, refer to the manufacturer's instructions.

· Mounting screws: For mounting screws with ISO metric threads in accordance with DIN 13 and threads in accordance with ASME B1.1, we recommend checking the tightening torques separately in accordance with VDI 2230.

· Threaded holes for axial piston units:

The maximum permissible tightening torque MG max for threaded holes is a maximum value that must not be exceeded.

· Locking screws:

For the metal locking screws supplied with the axial piston unit, a tightening torque MV is required.

Control mode

DG - two-point direct-acting control

DR - pressure control

DRG - remote pressure control

DFR, DFR1 - pressure and flow control

DFLR - pressure, flow and power control

ED - electro-hydraulic control

Ordering code

Product photos

  MKS hydraulic specializes in producing, sales and maintenance of hydraulic pumps and motors. The company has been working in hydraulic field since 1995 and wealth professional knowledge and field experience. We have developed and produced A4VSO, A4FO, A4FM, A10VSO, Parker PV varies hydraulic pumps and motors. Other series are also in the researching and developing design. With the concept “quality wins market, integrity casts the brand”, we strictly implement the testing standard and strive to be a hydraulic company worthy of customer’s trust.
  MKS products have been widely used in iron and steel metallurgy, forging, ceramics, water conservancy and hydra-power, construction machinery, ship, mining, agricultural machinery and other fields.

  MKS technical team has more than 10 R&D and designer which committed to research and development of hydraulic components,3D dynamic simulation process to upgrade,cooperating with advanced testing equipment, makes every effort to keep improving of new varieties of each series dedicated high durability efficiency parts as our priority, to meet the needs of users, and pursuit of every perfect products is the aim. The R&D department is a cohesion vitality and pursues of the enterprise brand.

  MKS main products are: plunger pump, vane pump, gear pump, direction valve, pressure valve, flow control valve, proportional valve, cartridge valve and hydraulic fittings, etc. We undertake all kinds of hydraulic system equipment design and manufacturing. The products are widely used in engineering, plastic machinery, shoes, casting, metallurgical, mining, metal cutting tools and other kinds of hydraulic system.