| Basic parameters |  | 
| Measuring medium | Liquids, fluids, gases (compatible with contact materials) | 
| Measuring range | -0.1~0~60MPa (see range selection table for details) | 
| Type of pressure | Gauge pressure, absolute pressure, negative pressure | 
| Temperature compensation | -10~70℃ | 
| Accuracy class | 0.25%FS,0.5%FS | 
| Frequency of response | 5,30Hajj100Hajj | 
| Stable performance | ±0.1% FS/year | 
| Temperature drift | ±0.01%FS/°C (within temperature compensation)±0.05%FS/°C (outside
temperature compensation) | 
| Overall weight | No display ≈ 190g with display ≈ 270g | 
| Ingress protection | IP65 (no display) IP54 (display) Note: The above protection level
refers to the completion of the electrical connection | 
| Output power |  | 
| Output signal | 4~20mA,RS485,0~10VDC,0~5VDC,1~5VDC,0.5~2.5VDC | 
| Power supply range | 9~28VDC,15~28VDC,3~5VDC,15~24VDC | 
| Power range |  | 
| Voltage type | ≤0.02Us(W),≤0.008Us(W),≤0.001Us(W) | 
| Current type | ≤0.02Us(W) | 
| Digital | ≤0.02Us(W),≤0.015Us(W) | 
| Load characteristics |  | 
| Voltage type | ≥10kΩ | 
| Current type | No display load ≤{(Us-7.5)÷0.02}Ω With display load≤{(Us-12)÷0.02}Ω (Us=supply voltage) | 
| Environmental conditions |  | 
| Medium temperature | -40~85℃ | 
| Ambient temperature | -40~85℃ | 
| Ambient humidity | 0%~95%RH(无冷凝无结露) | 
| Overload capacity |  | 
| Overload pressure | 300%FS,200%FS,12kPa,50kPa,300kPa,480kPa,750kPa,800kPa,1.2MPa,2MPa | 
| Burst pressure | 600%FS,500%FS,400%FS,20kPa,200kPa,600kPa,900kPa,1.25MPa,2MPa,3MPa,5MPa,2MPa,3MPa,5MPa | 
| Overall material |  | 
| diaphragm | 316L stainless steel (in contact with the medium to be measured) | 
| Process connections | 316 stainless steel (in contact with the medium to be measured) | 
| enclosure | 304 stainless steel | 
| O-rings | Nitrile rubber (contact with the medium to be measured) | 
| ED CIRCLE | Nitrile rubber (contact with the medium to be measured) | 
| Displays the shell | ABS Engineering Plastics (LED Display) | 
| Hersmann connectors | ABS engineering plastics | 
| Mechanical stability |  | 
| Vibration resistance | 10g(20… 2000Hz) in accordance with IEC60068-2-6 standard | 
| Impact Resistance: | 500g/ms meets IEC60068-2-27 standard | 
| Electrical protection |  | 
| Short-circuit protection | eternity | 
| Anti-polarity protection | No damage, but no work | 
| Insulation resistance | ≥100MΩ500VDC | 
| Dielectric Strength: | 500VAC | 
| Output limits |  | 
| The output is minimal | 4mA,0,0.001VDC,0.05VDC | 
| The output is maximum | 20mA,2000,10VDC,5VDC |