Private Mold IR5000 Audio Video IR Repeater Transmitter And Receiver Kit

* Reliable IR Sensor: all our IR sensor is from Vi-Shay, USA brand and reliable quality.

* High Sensitivity: real time transmission without any delay with its high sensitivity sensor.

* CFL Friendly: this unit can be installed in an area with compact fluorescent lighting and work in most lighting environments.

* LED Indication: LED indication when power connected and the signal is being sent.

* Broadband Remote Control: compatible with almost all the electronics appliances in the market with its wide frequncy range.

* Size: small & solid design, easy to install and fix.

Model: IR5000

Package Include

1×Hidden IR Repeater Box

1×3.5mm IR Receiver

2×IR Emitter

1×IR Blaster

1×Plug-in Power Supply

IR Module

Power Supply: DC12V/250mA (supplied with product)

IR Input:

1×3.5mm jack connector, for IR-CV-3 Receiver(3 conductor plug);

1×3.5mm jack connector, for IR-CV-4 receiver (4 conductor plug)

IR Emitter Output:

4×3.5mm jack connector, for IR-EM-3 emitter;

1×3.5mm jack connector, for IR Blaster

Status Indication: Green LED for system On/Off indication

IR Signal Indication: blue indication LED

Power Indication: red indication LED

Dimension: 55×85×23mm

IR Receiver(IR-CV-4)

Frequency Range: 25-60KHz

IR Reception Range: ±10 meters

IR Reception Angle: 90º(+45º/-45º from center)

IR Receiver Connection: 1×3.5mm jack plug(4 conductor plug)

Cable Length: 1×2meters, extendable up to max 100 meters

Dimension: 25×14×9mm

IR Emitter (IR-EM-3)

Connection: 3.5m jack plug(mono)

IR LEDs: 2×IR emitter LEDs

Cable Length: 2 meters

Peak Forward Current: 100mA

Forward Voltage Max: 1.5V

Peak Wavelength: 940nm

Emitter Dimension: 19 x11x12mm

IR Blaster

Connection: 3.5mm jack plug (mono)

IR LEDs: 2x IR blaster LEDs

Cable Length: 2 meters

IR Transmitting Range: 2 meters

IR Transmitting Angle: 90° (+45°/-45° from center)

Dimension: 22 x16 x 8mm

Power Adapter

Input: AC100-240V

Output: DC12V/250mA

DC Plug 5.5×2.1mm

Packing Way: Color box
Carton Quantity: 40pcs
Carton Size: 48x32.5x30cm
Carton Weight: 12/11kgs

Q: What’s IR repeater?

A: IR Repeater, or Infrared Repeater, also known as an IR relay or IR extender, is a device allows you to use an existing IR remote control to operate the audio video components located behind closed doors or walls in an entertainment cabinnet or equipment closet.

Q: How does IR repeater work?

A: IR Repeater works by receiving the IR signals from the remote, converting and transmitting them over a wire to the hidden enclosure where the equipment is located. There the signals are converted back to IR signals, which are then blasted at the equipment.

There are three stages of the working:

Firstly it receives the IR signal from a remote control.

Secondly it converts the IR signal into an electrical signal or radio frequency and send through the devices.

Finally the signal received will be converted back into IR light that the equipments will recognize.

The process requires several different components to make it work, and they are usually packed together in what’s known as an Ir repeater kit.

Q: What’s the differenece between single band and dual band IR repeater?

A: Every IR signal has a distinct frequency, these frequencies are measured in kilohertz (kHz). There are two general frequency ranges that all devices use, these ranges are called bands. The first band includes the frequencies ranging from 33-43 kHz, while the second band ranges from 44-60 kHz. In order for you to be able to control your device (like the TV), your remote and TV must work on the same frequency.

Single band IR repeater: only compatible with one frequency, typically, single band frequencies are only 33-43 kHz which works with most DVD and Blu Ray Players.

Dual band IR repeater: dual band repeater works on both frequencies (33-43 kHz and 44-60 kHz), compatible to most of the AV devices.

Remember: If an IR repeater is not compatible with the frequencies, it will not pass the signal and you will not be able to control your device. Currently all UM Audio IR repeater is dual band repeater, it is compatible to most of the AV devices use.

Q: How to install an IR repeater?

A: Firstly place the IR repeater box on a flat surface in your entertainment cabinet or equipment closet.

B. Place the IR emitter on/by the IR window on the devices by peeling the adhesive tape and sticking, then connect the IR emitter cable to the repeater box.

C. Locate the IR receiver where the remote control signal can be received, and then connect the IR receiver cable to the repeater box.

D. Plug in power adapter and now you can control the devices thet behind the closet or cabinet.

For detailed install instruction, please refer to the user manual that included in the UM Audio IR repeater package.

Q: What kind of IR product UM Audio offers?

A: UM Audio mainly offers wired IR repeater, wireless IR repeater and accessories for IR repeater. For wired IR repeater, we have different types, customer can choose based on actual using environment. Also UM Audio welcomes OEM, we can design and manufacture the IR repeater according to our client’s request.

Ningbo Uma Electronic Technology Co., Ltd. is a professional megaphone and IR extender manufacturer. We started business in 2012, focusing specially on manufacturing and designing. Our products are widely distributed to more than 50 countries and we have cooperated with a lot of famous audio/video and home automation brands.