Indoor 40.5Kv High Voltage Fuse Link Tube Type Fuse Current Limiting Xrnm Series

Fuse Manufacturer Factory Price Xrnm Series Indoor High Voltage Current Limiting Fuse Tube Fuses Link f

Product Description

ELSP Current-Limiting Backup Fuse is used in series with low current primary protection devices such as a Bay-O-Net fuse or MagneX Interrupter. The ELSP fuse is designed for use in transformer oil, Envirotemp™ FR3™ fluid, or an approved equivalent. The fuse's highly efficient current-limiting section minimizes the effects of high fault current stresses on equipment and the distribution system. Its minimum interrupting rating is coordinated with that of a low current interrupter to avoid undesirable low current operation; yet its maximum interrupting rating will clear the highest fault currents likely to occur. Higher continuous current ratings can be achieved by connecting two fuses in parallel.

8.3kv CBUC08030C100, CBUC08030C100M, CBUC08040C100, CBUC08040C100M, CBUC08050C100, CBUC08050C100M, CBUC08065C100, CBUC08065C100M, CBUC08080C100, CBUC08080C100M, CBUC08100C100, CBUC08100C100M, CBUC08125C100, CBUC08125C100M, CBUC08150D100, CBUC08150D100M, CBUC08165D100, CBUC08180D100, CBUC08180D100M, CBUC08250D100, CBUC08250D100M, CBUC09030C100, CBUC09030C100M, CBUC09040C100, CBUC09040C100M, CBUC09050C100, CBUC09050C100M, CBUC09065C100, CBUC09065C100M, 15kv, CBUC15030C100, CBUC15030C100M, CBUC15040C100, CBUC15040C100M, 3CBUC15050C100, CBUC15050C100M, CBUC15065C100, CBUC15065C100M, CBUC15080C100, CBUC15080C100M, CBUC15100C100, CBUC15100C100M, CBUC15125C100, CBUC15125C100M, CBUC15150D100, CBUC15150D100M, CBUC15165C10, CBUC15165D100, CBUC15180D100, CBUC15180D100M, 17.5kv CBUC17030C100, CBUC17030C100M, CBUC17040C100, CBUC17040C100M, CBUC17050C100, CBUC17050C100M, CBUC17065C100, CBUC17065C100M, 23kv CBUC23030C100, CBUC23030C100M, CBUC23040C100, CBUC23040C100M, CBUC23050C100, CBUC23050C100M, CBUC23065C100, CBUC23065C100M, CBUC23080C100, CBUC23080C100M, CBUC23100C100, CBUC23100C100M, CBUC23125D100, CBUC23150D100, CBUC23165D100, 38kv CBUC38050D100, CBUC38065D100, CBUC38080D100, CBUC38100D100, CBUC38120D100, CBUC38140D100

Fusing For Three-Phase Single Voltage Transformers
High Voltage Rating	Transformer kVA	Assumed Impedance %	38 kV Bay-O-Net Fuse (Cooper Power series)	38 kV Back Up Current-Limiting Fuse (Cooper Power series ELSP)
34,500Δ	150	2	4000380C06CB	CBUC38050D100
	225	3	4000380C06CB	CBUC38050D100
	300	3.50	4000380C06CB	CBUC38050D100
	500	4.00	4000380C08CB	CBUC38050D100
	750	5.75	4000380C10CB	CBUC38065D100
	1000	5.75	4000380C10CB	CBUC38065D100
	1100	5.75	4000380C11CB	CBUC38080D100
	1250	5.75	4000380C11CB	CBUC38080D100
	1500	5.75	4000380C12CB	CBUC38100D100
	1750	5.75	4000380C12CB	CBUC38100D100
	1850	5.75	4000380C12CB	CBUC38100D100
	2000	5.75	4000380C12CB	CBUC38100D100
	2250	5.75	4000380C14CB	CBUC38140D100
	2500	5.75	4000380C14CB	CBUC38140D100
	2850	5.75	4000380C14CB	CBUC38140D100
	3000	5.75	4000380C14CB	CBUC38140D100
	3200	5.75	4000380C14CB	CBUC38140D100

COMPANY PROFILE:

Xi 'an Wuhuan Special Fuse Co., Ltd. is a high-technology manufacturer company established by Wuhuan Electric Group in Xi 'an, Shaanxi Province, China's high voltage electric production base in 2000. It Mainly engaged in the development, design, manufacture, sales and service of fuses and other high voltage appliances. The main products of the company are high-voltage current limiting fuses, which are used in indoor 50HZ/60HZ power systems with rated voltage of 3.6-40.5KV. As American power transformer, Europe type power transformer, high voltage motor, voltage transformer, power capacitors and other electric equipment overload and short circuit protection, and in other appliances such as: load switch, vacuum contactor etc, protection circuit and complete sets of electrical equipment from damage by excessive overload current and short circuit current. The company has high-quality technical personnel, professional fuse manufacturing and testing equipment and advanced modern enterprise management concept, its product categories, production scale and sales revenue are growing at a high speed. Wuhuan Company implements ISO9001:2000 quality system standard, uses MCAD development and design, with the help of Intuitive ERP and advanced testing equipment to ensure the reliability of production and high quality products. All the products have passed the type test of the national high voltage electrical apparatus quality supervison and inspection center ,and are in line with the national GB/T15166.2 standard and IEC60282 standard of the International Electrotechnical Commission.

New products:

SDLDJ and SFLDJ & SDMDJ full-range protection high-voltage current limiting fuses developed by our company are mainly used for overload and short-circuit protection of domestic power generation transformers. This series of products complete specifications, rated current up to 100A, products have passed the national high voltage electrical quality supervision and inspection center type test.

Quality standards of the company:

We fully implement GB/T15166.2 and IEC60282(International Electrotechnical Commission) technical standards, product quality in line with the British BS standard, German DIN standard. Rigorous design, advanced technology, timely service, the company's quality system for the implementation of the quality policy to provide a full guarantee.

Our products:

1.High voltage fuse for overload protection of oil-immersed transformer

2.High voltage current limiting fuse for backup protection of oil-immersed transformer

3.High voltage current limiting fuse for power transformer protection

4.High voltage current limiting fuses for protection of 40.5kv transformer

5.High voltage current limiting fuse for full range protection of power transformer

6.High voltage current limiting fuse for protection of high voltage motor

7.High voltage current limiting fuse for vacuum contactor fuse (F-C) combination appliance

8.High voltage current limiting fuse for protection of voltage transformer

9.High voltage current limiting fuse for power capacitor protection

10.XRNT-15.5Q Full-range high-voltage current limiting fuse for transformer protection (integral)

11.Full range high voltage current limiting fuse for XRNT-40.5Q transformer protection (integral)

1.Are you manufacture?
We are a professional factory with more than 20 years of experience,Our projects supplied to Airprot/Subway/Railway/power station.

2.What is your technical advantages?
Our engineers worked in the power distribution industry field for 20~30 years.In particular, in non-standard customization of electric field, High altitude, non-standard voltage frequency field.

3.What is your price advantages?
we have 5 branch factorier for electric components,all raw materials are one stop shopping,so we can save the value for you!

4.How about your quality advantage?
We are 100% guarantee the quality for 3 years.

5.How about your delivery time?
The delivery time with 7-10 working days after get your deposit.Our factory is located in
Xi'an , Shannxi . In terms of quality and strength, we are both ahead of the market .

6.We can accept payment way:

TT/LC/DP /STS ORDER

Xi'an Wuhuan Special Fuse Co., Ltd., founded in 2001 in Xi'an, Shaanxi Province, is an early high-tech enterprise specializing in the development, production, and sales of high-voltage current limiting fuses in China. The company is located at No. 15 Zhenxing North Road, Fengjing Industrial Park, Huayi District, Xi'an City, Shaanxi Province.

Since its establishment, our company has experienced 20 years of scientific and stable development. Our technical strength and excellent product quality have been widely supported and recognized by users in the power and electrical industry. Our long-term cooperation with customers of all sizes has spread throughout the country. Our company adheres to the ISO9001 quality management system and strictly implements product standards in accordance with national standards. All high-voltage current limiting fuse product categories have passed the type test of the National High Voltage Electrical Equipment Quality Supervision and Inspection Center, and have obtained an inspection qualification report.

Our company currently has a total of 45 employees, including 5 senior engineers and 20 medium to senior technicians. The company's factory area covers an area of over 20 acres, with a factory area of 4000 square meters. It has two sets of domestically advanced fuse production lines and an annual production capacity of over 200000 high-voltage fuses.

Our company is particularly skilled in designing and producing non-standard and non-standard high current high-voltage current limiting fuse products for customers with special requirements. Over the years, we have solved many technical problems for customers, and we have also filled many domestic technical gaps in the field of non-standard and non-standard high current high-voltage fuses.

Xi'an Wuhuan focuses on innovative technology! Welcome new and old users to visit our company for inspection, visit, and guidance. Thank you to new and old users for choosing Xi'an Wuhuan products. Xi'an Wuhuan is your trusted partner for cooperation and supporting!