Light Weight Liquid Polyol And Isocyanate For Tire Foam

Polyurethane foam raw materials for the solid tire

JYT-21A/B

INTRODUCTION

JYT-21Ais made up of polymer polyol, grafted polyether polyol, cross linker, blowing agent, and composite catalyst. JYT-21B is a kind of modified Polyester Polyol.The finished products have high strength, good toughness, light weight, compression stress transfer smoothly, oil resistance, hydrolysis resistance and excellent fatigue resistance. This materials are widly used to produce tire foam which are used for the Golf car wheel,trolley are wheel etc.

CHARACTERISTIC

＊The above materials should be stored in the recommend temperature original drums, avoid the moisture, B component should be sealed by the N2 gas if it can not used up at one time.

＊Additive adding:Catalyst:100±20g/20kg; Foaming agent, 1600±100g/20kg；

Recommended Ratio:

REACTION & PHYSICAL PROPERTIES)

FOAM PROPERTIES

Remark:

Ø1,Pigment should be added into the A component, then the ratio of A and B should be adjusted.

Ø2,B component is easy to crystallization, it should be melted to liquid in at 75 degree C. However, B component can not be melted long time at high temperature(80℃, 24 hours), then B component will be lose efficacy.

Ø3,A component is easy to separate, so, it should be mixed well before using.

Ø4,The above data is tested by 6mm finished mould foam.

Joyway industrial Co.,Ltd. was founded by two great ladies in 2012.

Initially, we made the Polyurethane binder and rubber tiles for the playground and GYM. Because we focused on to provide the environmentally friendly polyurethane raw material for caring the safe and healthy of the children all over the world.

After decades of development and in response to market and customer demands, Joyway Group has expanded its product range and gradually established two specialized production bases focusing on polyurethane resin/ Polyurethane Pre-polymer and Rigid blend Polyols. At the same time, the Group provides partners with upstream and downstream raw materials for polyurethane production. So, currently, the main Polyurethane resin at below.

• Polyurethane Pre-polymer
• Blend Polyols
• Polyether polyols
• TDI (Toluene Diisocyanate)
• Polymeric MDI (Methylene Diphenyl Diisocyanate)
• MOCA (4,4'-Methylene-bis(2-chloroaniline))
• Release agents
• Planetary mixers
• Pu-metal bonding adhesive
• Other additives required for polyurethane products

This comprehensive product portfolio not only meets industry demands but also positions the Group as a key integrated service provider in the polyurethane sector.  

In 2021, in response to the market demand for high-quality polyurethane vibrating screens for mining applications, Joyway Group established a dedicated R&D team. This team focused on multiple aspects, including raw materials, molds, and casting platforms, leveraging its expertise in materials to break international monopolies. The result was the production of Polyurethane fine screens characterized by small aperture mesh sizes, excellent elasticity, long service life, and high cost-effectiveness.

In the same year, Joyway Group Chemical founded its subsidiary, Qinjin Qixing Mining Equipment Co., Ltd., and formed a joint venture with its Indian partners to establish a production base in India. This China-India collaboration aims to broaden perspectives and provide high-quality, durable screening equipment for the mining industry and related sectors.

Additionally, we offer a variety of screening equipment for the mining industry, such as linear screens, banana screens, vibrating screens ect. We are committed to delivering comprehensive screening solutions to our customers!

Currently，Our products are widely used in industries such as mining, coal,aggregates,chemicals and construction.

We have various polyurethane screen panel like Urethane Screen Panel,Polyurethane Tension Screen,Polyurethane Dewatering Screen Panel,Modular Polyurethane Screen,Flip-Flow Screen and TPU wire mesh.

Now, our product range continues to expand upstream and downstream.

In the future.

We have exported products to Europe and other countries in Asia,South America, Africa, Russia etc. Due to our excellent service and professional technical background, we also act as purchasing agent for some customers according to their specific requirements.

No matter how we develop, our concept is always safety, environmental protection and health. Hopefully our story with you will continue forever !