Industrial 15MM Square Carbon Fibre Tube Excellent Structural Performance

Excellent Structural Performance Industrial 15MM Square Carbon Fibre Tube

The 15mm square carbon fiber tube is a structural component made from carbon fibers and epoxy resin, forming a square-shaped hollow tube. This composite material is known for its exceptional strength-to-weight ratio, making it a popular choice in various industries and applications that demand lightweight, rigid, and durable solutions.

Key characteristics and features of the 15mm square carbon fiber tube include:

1. High Strength: Carbon fiber's inherent tensile strength provides the tube with excellent load-bearing capabilities, allowing it to withstand heavy loads and forces.
2. Rigidity: The square shape enhances the tube's resistance to bending and twisting, ensuring structural stability and minimizing deformation under pressure.
3. Lightweight: One of the most significant advantages of carbon fiber is its low weight, making the 15mm square tube significantly lighter than conventional materials like steel or aluminum.
4. Corrosion Resistance: Carbon fiber is inherently resistant to corrosion, making it suitable for applications in harsh environments or those exposed to moisture and chemicals.
5. Fatigue Resistance: The tube demonstrates good fatigue resistance, enabling it to endure repetitive loads without experiencing material fatigue or failure.
6. Versatility: The 15mm square carbon fiber tube can be cut, shaped, and customized to specific lengths, making it adaptable for various engineering and manufacturing needs.

All our carbon tubes in this section are roll-wrapped using high-grade carbon pre-preg, in a 2 x 2 twill weave pattern. Pre-preg is rolled onto a mandrel and placed in an oven to cure, resulting in a tube that is stiff and light.

These tubes can be used for robotics, UAV construction, leisure applications, and anywhere that requires low weight but high stiffness.

Tubes can be cut and shaped with basic hand tools, such as a fine tooth hacksaw. All tubes will be shipped in postal tubes to prevent crushing during transit.

Features:

• Light Weight – Less Density – 20% Of Steel
• High Strength
• High Corrosion Resistance
• Superior Dimensional Stability
• Consistent Cross Section
• Lasting Performance
• Excellent Structural Properties
• Environmentally Safe
• Non-Magnetic Electromagnetic
• Ease Of Fabrication & Installation

Applications:

• Automotive
• Light Aircraft Tubing
• Construction
• Duct rod / Fish rods
• Aerospace Instrument & Interior Supports
• Photography & Sound Booms
• Outer Space & Terrestrial Antennae Supports
• Corrosion Resistant Equipment Marine
• Sporting Goods
• Robotic Arms & Supports
• Advertising Panels
• Lifting Spars

Our Service:

1. It ensures that a year of quality assurance and 24 hours online customer service.
2. Protection of your sales area, ideas of design, and all your private information.
3. Request for samples is accepted.
4. Drilling and slotting are accepted.
5. We guarantee the products to be manufactured with the finest materials and mature technics.
All tubes can be repaired at no charge if returned to us, postage prepaid, within one year.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.