Product Details
Company Profile

GB/T5170.5-2006 Temp & Humidity Test Chamber for Material Performance Check

Product Description

This Chamber can simulate different environment condition. It's appropriate for testing material performance, such as resist heat, resist dry, resist humidity and resist cold. That can define performance of material.

Mainly used in national defense industry, aviation industry, automotive parts, electronic components, plastics industry, food industry and other related product development, straightening management engineering test specifications. Its characteristics are as follows:

1. The import of compressors and refrigeration accessories by the well-known brands in the national boundaries ensures the stability of the refrigeration system.

2. The cause of the faults can be displayed and the reason is easy to exclude.

3. The special air supply cycle design, the temperature and humidity distribution uniformity is good.

4. The whole series of imported microcomputer controllers are colored. Color touch screen, Chinese and English system, can be used as a function of setting the city value. It can show the cause of the trouble, exclude easy, super quiet design, effectively reduce the running noise of the equipment, and

5. Super quiet design, effectively reduce the running noise of the equipment.

6. Multiple safety protection, refrigerant high voltage protection, compressor overload protection, current overload protection, overtemperature protection, leakage protection.

Standards: GB/T2423/5170/10586, JIS C60068, ASTM D4714, CNS3625/12565/12566

Characteristics:

1. Use the high precision microcomputer touch temperature and humidity controller with high stability of platinum resistance to temperature and wind speed in the circulatory system of temperature and humidity test.

2. Control temperature&humidity well-distributed, precisely and steady.

3. Completely independent system separate for testing in high temperature, low temperature and constant temperature&humidity environment.

Benchtops Temperature & Humidity Test Chamber, High Temperature Test Chamber, Dry Oven, Alternating Temperature Test Chamber, Alternating Temperature & Humidity Test Chamber, Temperature Rapid Change Test Chamber, Temperature & Humidity Rapid Change Test Chamber, Alternating Temperature Alternating Humidity Rapid Change, Thermal shock Test Chamber(Two-zone, Three-zone), Large Walk-in Test Room

Applications

● To simulate test environment with different temperature and humidity

● Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…

● Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation

● Uncover test unit weakness in a short-term test with accelerated time effect

Specifications

Model		BT-280	BT-2150	BT-2225	BT-2408	BT-2800
Inner Size W×H×D(cm)		40×50×40	50×60×50	50×75×60	60×85×80	100×100×80
Outside Size W×H×D(cm)		93×155×95	100×148×106	117×166×91	140×176×101	170×186×111
Volume (V)		80 L	150L	225L	408L	800L
Temp and Hum Range		A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C RH20%-98%
Function	Fluctuation	±0.5°C ±2.5%RH

Chamber Design Features

● High performance and quiet operation (68 dBA)

● Space-saving designed for flush installation to wall

● Full thermal break around doorframe

● One 50mm diameter cable port o left, with flexible silicone plug

● Direct water supply connection for continuous operation

● Accurate wet/dry-bulb humidity measurement system for easy maintain

Programmable Controller

● PIC controller for test chamber

● Step types include: ramp, soak, jump, auto-start, and end

● RS-232 interface to connect computer for output

Features:

1. Small size, special design and overlapping, not occupying planar space, suitable for laboratory use.

2. Low power consumption, energy saving and consumption reduction; low noise, low radiation, green

environmental protection.

3. High efficiency, communication mode using Qualcomm software F4 controller to complete a variety

of tests at the same time.

Component & Spare Parts Used for the Chamber

TECUMSEH compressor DANFOSS Filter

DANFOSS expansion valve AIRMENDER Gas Liquid Separators

Onsite Service:

1. Device installation;

2. Equipment Operation Test Technology training;

3. Equipment Calibration;

4. Daily maintenance and maintenance of equipment

Product Tags:


*From:	Your email address is incorrect!
*To:	BOTO GROUP LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Temperature Humidity Test Chamber
Brand Name:	BOTO
Model Number:	B-T-120
Certification:	CE TUV ISO
Place of Origin:	China
MOQ:	1 Set
Price:	Negotiable
Payment Terms:	T/T, Western Union
Supply Ability:	1000 set/month
Delivery Time:	15 days
Packaging Details:	Wooden Case
product name':	High Low Temperature Chamber
Heat-up time(min):	About 3~5°C/min
Internal Dim:	456045 CM
Temp Range:	-70°C~150°C
Model:	B-T-225
External Dim:	75189110 CM
Exterior:	coating or SUS#304 Stainless steel plate
pull-down time:	About 0.7~1°C/min
power:	2kw~6.5kw
Power Source:	AC:220V/380V 50/60Hz
Usage:	Temperature Humidity Test Chamber for Resisting Heat,Low Temp Test
Interior:	SUS#304Stainless steel plate