LM60CIM3X NOPB HVAC Temperature Sensors , HVAC Humidity Sensor -40 To 125

LM60CIM3X/NOPB HVAC Temperature Sensors TO-92 Option 3-SOT-23 -40 to 125

1 Features

• Calibrated Linear Scale Factor of 6.25 mV/°C

• Rated for Full −40°C to +125°C Range

• Suitable for Remote Applications

• Available in SOT-23 and TO-92 Packages

• Key Specifications

  • – Accuracy at 25°C: ±2°C and ±3°C (Maximum)

  • – Accuracy for −40°C to +125°C: ±4°C (Maximum)

  • – Accuracy for −25°C to +125°C: ±3°C (Maximum)

  • – Temperature Slope: 6.25 mV/°C

  • – Power-Supply Voltage Range: 2.7 V to 10 V

  • – Current Drain at 25°C: 110 μA (Maximum)

  • – Nonlinearity: ±0.8°C (Maximum)

  • – Output Impedance: 800 Ω (Maximum)

    
    

2 Applications

• Cell Phones and Computers

• Power Supply Modules

• Battery Management

• Fax Machines and Printers

• HVAC and Disk Drives

3 Description

The LM60 device is a precision integrated-circuit temperature sensor that can sense a −40°C to +125°C temperature range while operating from a single 2.7-V supply. The output voltage of the device is linearly proportional to Celsius (Centigrade) temperature (6.25 mV/°C) and has a DC offset of 424 mV. The offset allows reading negative temperatures without the need for a negative supply. The nominal output voltage of the device ranges from 174 mV to 1205 mV for a −40°C to +125°C temperature range. The device is calibrated to provide accuracies of ±2°C at room temperature and ±3°C over the full −25°C to +125°C temperature range.

The linear output of the device, 424-mV offset, and factory calibration simplify external circuitry required in a single supply environment where reading negative temperatures is required. Because the quiescent current of the device is less than 110 μA, self-heating is limited to a very low 0.1°C in still air in the SOT-23 package. Shutdown capability for the device is intrinsic because its inherent low power consumption allows it to be powered directly from the output of many logic gates.

Device Information