160m/Min Flute Lamination Machine 1900x1900mm With Flip Flop Stacker For Printing

Litho Flute Lamination Machine With Flip Flop Stacker For Printing Intellgent ZGFMS1900

Principles:
The top paper is sent out by the upper paper feeder and sent to the start detector of the positioning mechanism for detection. Then the bottom paper is sent out; after the bottom paper is coated with glue on the glue wheel, the top paper and the bottom paper are respectively conveyed to the paper Synchronous detectors on both sides, after the detection, the controller calculates the error value of the paper and the bottom paper, and the servo compensation device on both sides of the paper compensates the paper to a predetermined position for splicing, and then pressurizes the conveying. The machine presses the paper and conveys it to the delivery machine to collect the finished product.

Parameter

Principles:
The top paper is sent out by the upper paper feeder and sent to the start detector of the positioning mechanism for detection. Then the bottom paper is sent out; after the bottom paper is coated with glue on the glue wheel, the top paper and the bottom paper are respectively conveyed to the paper Synchronous detectors on both sides, after the detection, the controller calculates the error value of the paper and the bottom paper, and the servo compensation device on both sides of the paper compensates the paper to a predetermined position for splicing, and then pressurizes the conveying. The machine presses the paper and conveys it to the delivery machine to collect the finished product.
applicable materials:
Paste paper --- 120 ~ 800g/m thin paper, cardboard.
Bottom paper---0.5~10m/m paperboard, single-sided cardboard, multi-layer corrugated paper, pearl board, honeycomb board, styrofoam board.
Glue - resin, etc., PH value between 6 ~ 8, can be applied to the glue.
Structural features:
Adopting the world's leading transmission control system, only need to input paper size system auto-tuning.
Computerized high-speed fitting, up to 150m/min.
Chuanliu-type air supply head, with four sets of forward nozzles and four sets of suction nozzles.
Feed Block adopts low stack cardboard, which can fit the paper to the pallet, and can install track-assisted pre-stacker

BRANCH INTRODUCTION:
1. BOTTOM PAPER FEEDING

2.TOP SHEET FEEDING MECHANISM

3.ELECTRICAL SYSTEM

Designed in the accordance with European CE requirement, ensure machine stability, high efficiency and low failure. Using man-machine interface and PLC combination, display all the information, such as warning, error detect, failures, and operating speed, etc on the screen at a glance.

4.PRE-STACK PART

5.Transmission System

6. Left-right positioning system

The right and left are accurately positioned with synchronous side stoppers, the bottom paper and top paper are precisely positioned, and the bottom paper and top paper are accurately positioned with left-right positioning devices.

7.POSITIONING SYSTEM & GLUE ROLLER

The use of multiple sets of photoelectric sensor at bottom sheets relative position,control top sheets on both sides of the servo motor to do independent compensation action, so that accurate positioning of top paper and the bottom paper.Stainless steel roller, never rust, after narrowly grinding,guaranteed the minimum amount glue coated evenly.
Down roller be cleaned by water roller.
8. TOUCH SCREEN OPERATION SYSTEM

It adopts the centralized control of the touch screen, realizes the man-machine dialogue with the high-resolution man-machine interface, and realizes the real-time dynamic monitoring of operation and fault, making it more convenient to adjust and troubleshoot.

9. LEADING EDGE FEEDING SYSTEM(OPTIONOL)

This system is for option, more suitable for large size and thick bottom sheets.
10. SHAFTLESS SERVO FEEDER(OPTIONAL)

This system is for option, more suitable for long size top sheets.
11. BIG SUCTION SYSTEM FOR BOTTOM PAPER(OPTIONAL)

This system is for option, if your products with cardboard, corrugated board, and 3 or 5 layers. you can choose this system.
12. AUTOMATIC LUBRICATION SYSTEM (OPTIONAL)

Lubricate the bearing regularly to prolong the service life of the bearing

Shanghai Bochen Machinery Manufacturing Co., Ltd. is a professional enterprise that develops and produces post-press machinery which include Automatic flute laminating machine, Automatic flip flop stacker, Automatic pile turning machine and Corrugated feeding machine, etc. All products can be customized according to customers' special requirements. We are a professional and comprehensive enterprise integrating "scientific research, production, sales and service". Our products are sold well all over the country and exported to Southeast Asia, Africa, South America and other countries with high praised by customers. While absorbing international advanced technology, the company carries out continuous technical reforms to make it more suitable for market competition.
In 2012, in order to meet the demand for printing machinery in the domestic and international markets, we invested heavily to found “Anhui Innovo Bochen Machinery Manufacturing Co., Ltd.” in Mingguang City, Anhui Province. It has become an important printing machinery manufacturing enterprise in the economic circle of the Yangtze River Delta, with sales centers in Anhui, Zhejiang, Shanghai and all over the country.
The company always adheres to the philosophy of “Technology Innovation, Quality Excellence, Market Leading”, and constantly creates the latest products, the highest value, the best service for customers. We are committed to developing high-tech, high value-added products and dedicated to all customers with first-class products and services.
Innovo Bochen will accompany you to take the lead!