Castle Style Kids Outdoor Playground Equipment For Community Anti UV TQ-CB113-2

Galvanized steel pipe plastic castle style outdoor playground with deep colors for community TQ-CB113-2

For indoor children's play equipment, the safety threat of fire hazards is quite large. If the fire hazard cannot be solved and fire safety work is done, it is difficult to ensure the safety of indoor children's play equipment. Therefore, we remind you that in order to do a good job in fire safety work for indoor children's play equipment, there are many things that operators need to do. We take stock of the details of the following firefighting work, are you paying attention?
1. From the setting of the children's casino, it should be set on the first to third floors of the shopping mall. It is strictly prohibited to be located in the underground shopping mall or on the fourth floor or above.
2. Indoor children's play equipment should be taken to the local fire department for record before installation, and equipped with fire equipment, including fire extinguishers, fire emergency lights and evacuation signs, and often check to ensure their availability.
3, the electrical circuit laying must meet the requirements of the specification, the pipe is in place, when using high-power electrical appliances, it should be kept at a sufficient distance from the combustibles. At the same time, fire exits should be reserved during installation.
4. In the event of a fire, a large amount of toxic fumes from combustible materials are the main cause of death and suffocation. We remind you that the materials used in recreational facilities must be non-combustible, non-flammable materials or flammable materials after flame retardant treatment.
5. There should be no less than two safe exits for children's entertainment equipment. It is best to have an independent entrance and exit. When the mall is a high-rise building, separate entrances and exits must be set up.
6. Carry out strict routine inspections every day to check whether the electrical components of the control cabinet have aging rust or improper connection, and contact the manufacturer for replacement. Check if large parts such as slewing rings are cracked or not bitten.
7. Indoor children's play equipment should improve the fire prevention awareness during the operation process, and the daily safety record should be made when the conditions permit. All power switches should be turned off at the end of each day's operation to avoid a sudden short circuit and a spark that can cause a fire.
8. Formulate practical and feasible emergency evacuation plans, and organize regular drills to keep the evacuation channels open.
We remind you that only by doing the above measures, we can ensure the safety of indoor children's play equipment, and the safety of children will be more secure, so that business is booming and wealth is growing!

Wenzhou Kidsplayplay Toy Co., Ltd. (www.tqplayground.com) is located in Linhai, Taizhou, an excellent tourist city in China. The company covers an area of ​​more than 20,000 square meters. It started from a mold company ten years ago and developed into more than 100 employees. Name, including a group of high-quality technology and management talents with years of experience in rotomolding molds, is a rotomolding mold and children's play equipment company integrating design, development, production and sales.

In May 2011, the company cooperated deeply with Zhejiang Yingbo Amusement Equipment Co., Ltd., and merged with Zhejiang Tianqi Rotational Mould Co., Ltd. in March 2017, unified management, unified management, and achieved substantial breakthroughs in the indoor naughty castle field. Amusement equipment that meets the German EN1176 standard is dedicated to children around the world. Adhering to the goal of “going to the world and rolling the world”, the company is committed to expanding overseas markets. The company's English website www.tanqplay.com, March 2012, with the company's continuous improvement in the Southeast Asian market, Tianqi Amusement Thailand branch TQ (Thailand) Co., Ltd (website: th.kaidiplay.com) and Malaysia Company TANQ EQUIPMENT SDN BHD (website: www.my.kaidiplay.com), and Mexico branch TQ PLAYGOUND CO., LTD. (website: www.tqplay.com), Russian branch Kidsplay Toy Co.. (website: www .ru.kaidiplay.com) has been established one after another, opening a new page on the road to the world and rolling the world.

Management policy: The company adheres to the concept of 'all for the safety of children, all for the health of children, all for the development of children' concept. We have consistently provided our customers with products with high safety performance, strong entertainment interest, strong structural design reliability, elegant appearance and international standards. Establish a customer-centric service concept to protect the interests of customers from the root and the source.

Main products: rotomolding molds, outdoor large-scale amusement equipment, indoor naughty castles, outdoor combination slides and plastic accessories. Suitable for large shopping malls, supermarkets, communities, kindergartens, parks and other play areas. The company has its own design team, which can develop molds according to customer requirements or design products according to the actual site of customers, and produce products of different specifications to meet customer needs.

Product features: more than ten years of rotational molding mold industry experience and independent research and development of large plastic rotary molding equipment, with 7 independent arm, four-station full-scale rotary forming rotomolding machine, in the structure to ensure that rotomolding products are not easy to fall off, no damage In the surface treatment, the pores and trachoma are eliminated, and the wall thickness of the product is uniform and reliable. The plastic is made of South Korean imported LLDPE plastic powder, which is in line with the international environmentally friendly edible grade. The iron parts are made of hot-dip galvanized pipe and spray-coated. The complete set of products is more resistant to use than traditional FRP and blow molded products. It has a longer service life in outdoor high and low temperature and various complicated environments, and is resistant to abrasion and weathering and is not easy to fade.

In addition, the design team is a strong guarantee for the development of our company. In the design of molds and accessories, we strictly follow the EN1176 standard and ensure the safety of the products from the source. The design of the complete set of products is based on the outstanding overall effect, and the reasonable and safe frame structure wins the praise of the customers.

Tianqi Rotomolding follows the tenet of “all responsible for customers”, continuously improves the quality of its personnel and product advantages, continuously improves and builds lean products, and passes third-party certifications such as CE, ISO, TUV GS EN1176, SGS factory certification, and better. Serve the customers and create a bright future for the company's strategic goal of “going to the world and rolling the world”.