ISO 4920 Non Woven Fabric Water Stain Testing Machine，Water Repellency Tester

ISO 4920 Non Woven Fabric Water-Stain Testing Machine,Water Repellency Tester

INTRODUCTION

Water repellency is an important property of textile fabrics to measure the efficiency of water resistant/repellant finishing applied on textiles. YG813 Spray Rating Tester is the appropriate equipment to test the property spraying a specified volume of distilled water is sprayed on a Test specimen, which has been mounted on a ring and placed at an angle of 45°, so that the center of the specimen is 150mm below the spray nozzle. The Spray rating is determined by comparing the appearance of the specimen with AATCC Spray Test Rating Chart.

USAGE

To determine the water repellency or surface wetting resistance of fabrics. Appearance of the specimen is compared against photographic chart.

TESTING STANDARDS

ISO 4920-Determination of resistance to surface wetting (spray test)

AATCC 22-Water repellency:spray test

BS 3702-Determination of Resistance of Textile Fabrics to Surface Wetting (Spray Test)

IS 390-Determination the water repellency of fabrics by water spray test

NEXT 23,WSP 080.1.R4 (12),BS EN 24920,M&S P23

SALIENT FEATURES

1. Spatially designed equipment to measure the resistance of fabrics to wetting by water.

2. Latest economic design with modern esthetics.

3. With Stainless steel spray nozzle for rust free, long life & durability.

4. Complete with all accessories including 500ml beaker, template for cutting specimen.

5. Specimen holder is fixed at 45°to the specification of American standard.

6. Supplied with calibration & inspection certificates.

TECHNICAL DETAILS

1. Size of test specimen:180 x 180 mm square.

2. Spray nozzle:Converse face with 19 holes.

(Center-1, First circle-6, Second circle-12)

3. Rate of water spray:250 ml in 25 to 30 seconds.

4. Position of test specimen:Mounted on a ring and placed at an angle of 45°.

5. Distance between center of spray: 150 mm (±2 mm)

nozzle and center of the specimen

6. Holder Dia.:150 mm (±5 mm)

7. Plastic funnel dia.:150 mm (±5 mm)

8. Height of the funnel with nozzle:200 mm (±10 mm)

9. Dimensions:200 x 250 x 480 mm

10. Weight:5 Kg

ACCESSORIES SUPPLIED WITH THE INSTRUMENT

1. Main Unit:01 No.

2. Calibrated Beaker (500 ml.) (Plastic):01 No.

3. Specimen Template:01 No.

4. This User’s Manual:01 No.

5. Inspection & Conformance Certificate:01 No.

Machine Certificate:

We,Dongguan Zhongli instrument Technology Co., Ltd. Which Located in Dongguan, Guangdong, China. It is a collection development, research, production and sales of test equipment technology company.

Companies with technical support, marketoriented, fundamental human. Have a high level of professionalism, experience and innovative research team and carved small peck production team. Companies with the most advanced technology, the most stable quality, best price, best after sales service, from installation and commissioning, professional training, to solve practical problems of customers, providing 24-hour technical advice. company's products among consumers enjoy higher status, with many agents to establish a long-term stable cooperative relations.

Our products are widely used in rubber and plastics industry, Paper/carton/paperboard industry, Cable and enamelled wire industry, Textile/Fabric industry, Shoes /Leather industry, Food industry and other many indstry. At the same time, are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB, ISO, TAPPI, EN, DIN, BS and other domestic and international standards.

Provide our customers with better overall solution laboratory, including laboratory design, planning, renovation and equipment selection, installation, training, maintenance, Comparative testing management system, such as one-stop authentication technology services.

Promises: Two year free maintenance of all equipment, maintenance of life, welcome to consult the discussion!