DC1000V HEV Series Electric Vehicle Fuses TUV Certified

HEV series TUV certified 1000VDC fuse

Product details of the 1000VDC fuse

HEV series 1000VDC fuse is our model of HEV-J-Q, the installation available in center to center bolt on.They can line in circuit of DC1000V,current rated of 5A-800A,and the breaking capacity up to DC30KA.The performance and dimension conform to GB13539,IEC60269,UL248.

Application of the 1000VDC fuse

It is suitable for short-circuit and backup protection of semiconductor devices such as frequency converters, rectifiers, inverters, various power supplies, as well as power batteries, motors, capacitors, wires and other equipment and devices. This product has good anti-vibration and flame-retardant properties, and is suitable for applications in vibration environments such as rail transit and motor vehicles.

Product dimension of the 1000VDC fuse

Conditions of use

Normal use conditions and parameter correction

The fuses work normally under the following normal conditions and no any additional correction required.

When it exceeds the normal using conditions, some parameters or consultation may need to be corrected if they are within the allowable using conditions. If it is beyond the scope of allowable using conditions, you should consult our company, and carry out the work adaptability evaluation and test of the conditions.

It is recommended that the current value of long-term current shall not be greater than 80% of the rated current.

Ambient Air Temperature

Normal using conditions: -5°C ~ 40°C.

Permitted conditions: -40℃～85℃.

Parameter correction for ambient air temperature changes: working below -5°C, the pre-arc time of the fuse's low overload current is slightly extended, and the rated current is slightly increased. But unless above -5℃ is not in the working range, generally do not consider increasing the rated current of the fuse.

We have high-quality professional products, as well as advanced product lines and equipment’s. All of the products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. Along the increasing market demands, we continuously satisfy customers by updating products to improve production systems, improve quality.

Shenzhen Deer Electronic(Dissmann Fuse) is National High-Tech company was founded in 2000 by Senior Engineers Team. The Engineers were responsible for products’ R&D in famous companies, reorganized and founded Shenzhen Deer in 2005. Focused on R&D and production Current limiting Fuses. Now we’ve got 4 Patents of Invention of China and 12 Patents for Utility Model.

We are well-known as one of the leading high voltage automotive fuses, charging pile fuse, high voltage fuse, fuse holder, charging pile module fuse manufacturers and supplier in China. Welcome to enquiry our high quality fuse and the surrounding products at competitive price from our factory. Contact us for more details.

DISSMANN Fuse Company was founded in 2000, focusing on the fuse and the surrounding product development, production, all products through UL, TUV, VDE, ASTA, PSB, CCC, CQC, IATF16949, ISO9001-2015, ROHS certification.

Shenzhen Deer is National High-Tech Company, with 20years’ R&D Lean production and rich experience. The initial technology originated from Europe and US, after many years’optimization, the products’performance has unique advantages.

Our products are widely used in New-Energy vehicles Whole vehicle field (PACK, PDU, BDU,ECU,Motor,MSD,Low-Voltage Control box),Charging pile system and Charging Module, PV Solar Combiner box,PV Inverter, Energy Storage UPS,Industrial Distribution Cabinet,5G Telecom Power, BS Plug, Home appliance control board, Lighting drive power etc. Our products got UL,UR,VDE,TUV,ASTA,PSB,CCC,CQC,CE,ROHS, worldwide Safety regulations and Environmental certification.

In order to improve quality and efficiency, shorten delivery time,all-round comprehensive Core competence, we successfully build Fuse’s core part--Fuse wire’s Metallurgical plating, the material’s formula and craft. And build a team for High-level mechanical electrical integration,Full-Automatic Non-standard Equipment.We have absolute advantage in meeting Fuse core Electrical performance and High-speed Automatic production.

Our Fuses have unique advantage in High-Current, High-Voltage, High breaking capacity,Low Temperature-rise,Low Power loss, Long life, Anti-Surge, Lightning resistant, super fast-acting fuse etc. Special applications. Our Auto-grade Fuse Passed harsh environmental reliability tests. For DC High-Voltage (1000VDC),High current (1500A),Good Seismic performance, Light-weight,High breaking capacity(DC50KA, AC200KA), Super Long life(100K Kilometers),Low allowable current, have obvious advantage in Vehicle Regulation Application Index!

We can get new products’ Certificates testing rapidly, we invested several Million RMB to build a laboratory, the Lab. Is UL&TUV authorized third-party witness Lab., Provide a solid guarantee for the product to obtain authority and reliable test data.This Lab. Enable us to get UL&TUV very fast(within 15days).

In order to serve customers better, our High-level Non-standard Automatic Production Dept.are producing Customized equipment, make full-automatic highly-efficient Mechanized production serve manufacturer better, make the production easier, quality better, delivery faster, cost lower and performance higher.

Expect to hand in hand with our old&new customers, to make higher quality products and create better future!