Magnesium Aluminum Spinel Corundum Refractory Low Cement Castable For Steel Ladles

Magnesium aluminum spinel corundum refractory low cement castable for steel ladles

Castable Introduction

castables refractory has very similar physical characteristics to fire brick. It has almost the same density, thermal conductivity and compressive strength as the fire brick, it can be poured or trowelled into place, filling awkward gaps that would be very difficult to fill with bricks.

Feature

1. High refractoriness, High refractoriness under load.
2. High density, low porosity.
3. Good slag resistance and corrosion resistance.
4. High strength and wear resistance.
5. Good resistance to flake performance and thermal shock stability.
6. Scouring resistance and Good hot strength.

Castable Technique Data

	low cement castable		heat resistant castable
	XCL-55	XCL-75	XJC-60	XYJC-35	XRLL-42	XKSL-75
Al2O3 ≥%	55	75	25	35	30-55	75
CaO %	2.5	1.2	5.0	5.0
Si2O %	36	16	60		35-50
Density ≥g/cm3	2.4	2.85	1.95	1.8	0.7-0.8	2.55
110℃*24 Compression strength ≥MPa	45	55	35	35	12	15
Application	Aluminium water tanks and conveying troughs Lining mixing furnaces and reverberatory furnaces Roof and bottom crucibles of induction furnaces		Sealing castables for the base part of the electrolytic cell Anode roasting furnace lining Melting furnace thermal insulation layer Melting furnace wall and induction furnace crucible lining

Yixing Xinwei Leeshing Refractory Material Co., Ltd

Refractory Industry is one of pillar industries in China Rare-Earth Holding Group. Beneath its 100% holding, there are two subsidiaries: Yixing Xinwei Leeshing Refractory Material Co., Ltd and Wuxi Xinwei Pan-Asia High-Temperature Ceramics Co., Ltd, professionally work on medium-to-high grade refractory material research, development, produce and project construction.

The company can produce the refractory material products of 178 product brands under eight major series, the annual production capacity is up to 100,000 tons, among them, 60,000 tons of fired products medium-to-high gradly, 20,000 tons of unfired products, 20,000 tons of unshaped refractory materials. The company enjoys the power to engage in import and export trade on its own account, the products find a good sale in Japan, Korea S., Russia, Australia, U.S.A. etc. . Company refractory exported account take advanced position in domestic.

The refractory materials produced by No.2 branch of our company mainly serve metallurgical industry at home and abroad. Since the company was set up, we have established technologically cooperative relations with Japan Krosaki Harima Corp., and mastered advanced technology about refractory material production, and we have got a great achievement in improving the quality and developing new varieties of refractory materials ,which are used in refining furnaces, pouring ladle mixers, blast-furnaces, hot-air furnaces, large lime kilns, and non-ferrous metallurgy, and products, which are made in China rather than imported, have met requirement in designing and using. For instance, we provided a series of deoxided vacuum electrical-smelted re-integrated magnesia-chrome bricks for the outside of RH furnace for Baoshan steel Co., Wuhan steel Co., Taiyuan steel Co., Ma' anshan steel Co... We supplied series of directly bonded magnesia-chrome, semi-reintegrated chrome-magnesita, electrical-smelted re-bonded magnesia-chrome cast materials ,etc. for domestic large non-ferrous metal plants, such as Guixi metallurgical plant, Tongling non-ferrous metal Co, Ltd. and Jinlong copper industry plant. And we furnished low-creep mullite series products,pre-masonry cordierite-mullite bricks, sillimanite ones, micro-porous sintered Alumina-carbon ones and cast materials for ladle body, tapping landers, slaglanders, branch landers and pre-fabricated parts for Baoshan steel Co., Ma anshan steel Co., No. 1 branch of Shanghai steel Co. and ZIMBABWE Co. which is assisted by Beijing, Jiuquan steel Co., etc. And we provided NKK AL203-SiC-C products in use for torpedo cars for Japan Nippon Steel, Japan NKK, Japan Kimitsu, Japan Oita, Japan Nisshin.

In recent years, it has cooperated with Japan's Kurosaki Harima Co., Ltd. in deep technical cooperation, and has hired Japanese experts to serve as chief engineers in the company all the year round. From raw material selection to finished product production to product packaging and transportation, all links are produced and controlled according to international standards. The company's technical solutions and process lines have been optimized, and a complete set of electrofusion recombination and semi-recombination magnesia-chrome brick production processes have been developed. , high-quality high-purity magnesia bricks and non-fired aluminum silicon carbide carbon bricks and other products have entered a large number of "Nippon Steel Co., Ltd., Steel Pipe Co., Ltd. Yawata, and Hiroko Steel Works, creating a new road for my country's refractory exports and for my country's The optimization of refractory resources has laid a certain foundation.

In addition to meeting the general needs of steel mills, the eight series of refractory products produced by our company (see the company's general sample) have also developed many special products to meet the special requirements of the metallurgical industry, and matched our leading products to provide The user implements the EPC to meet the user's needs.