Air Swept Coal Mill Ore Grinding Mill Asynchronous Motor PLC control YRKK ZDY MBY

Ore Grinding Mill Air Swept Coal Mill

Ⅰ. Technical characteristics of air-swept coal mill(ore grinding mill)

(1) The transmission forms used by the drum mill include edge leaflet, center drive, multi-point meshing edge drive, etc.; the drive forms include asynchronous motor + reducer + pinion + large gear and synchronous motor + air clutch + pinion + large gear;

(2) Generally, the support method of static and dynamic pressure bearings at both ends is adopted, and a fully enclosed self-aligning 1200 line contact 'rocker type' bearing is used. Full static pressure support;

(3) The large open gear is equipped with a sealed and reliable gear cover, and is equipped with an automatic glycerin spray lubricating device;

(4) The cylinder is the key part of the mill, and a computer is used to carry out finite element analysis on it to ensure the reliability of its use;

(5) The large and medium-sized mills are equipped with slow drive devices;

(6) Large and medium-sized mills are equipped with high and low pressure lubrication stations;

(7) The control and protection system adopts PLC control.

Ⅱ. Specification and meaning of air-swept coal mill(ore grinding mill)

φ4×8+3.5m = inner diameter of cylinder×effective length of cylinder+length of drying bin

Ⅲ. Development process of air-swept coal mill(ore grinding mill)

From the past φ2.2m, φ2.8m, φ3m, φ3.2m, etc., to the present φ3.8m, φ4m, etc. Equipment capacity from 500t/d, 700t/d, 1000t/d, 2500t/d, 5000t/d, 6000t/d.

Ⅳ. Working principle of air-swept coal mill(ore grinding mill)

The raw coal is fed into the drying bin of the mill from the runner of the feeding device, and the hot air with a temperature of about 350 ℃ also enters the mill through the air inlet pipe to dry the raw coal, and the dried coal enters the grinding mill through the partition board The silo is crushed under the impact and grinding of the grinding body (steel ball). At the same time, the gas formed by the special exhaust fan will bring the pulverized coal powder out of the mill through the discharge device.

Ore grinding mill technical parameters

Ore grinding mill photo explanation

Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade.

With a garden-like industrial park and modern standard plant covering 80,000 square meters, ZTIC possesses advanced equipments, technologies and detecting methods. After more than 30 years development, the company has developed into a collectivized one with product designing, manufacture, installation and technical services as a whole. The products comprise all the equipments used in mining, cement, metallurgy, construction as well as the related accessories with high power reducer and large-sized castings & forgings, etc.

ZTIC has acquired ISO 9001:2008 Certification of conformity of Management System Certification, Mine Product Safety Authentication, Recognition for BV Mode Ⅱ Survey Scheme in France, Mining Electrical Equipment KY Certification, etc.
The company has also acquired "Fully Quality Management Achievement Award", "Top 50 Enterprises", "Henan Outstanding Innovative Enterprise” and “The Most Powerful Enterprises of Henan" in 2010.

Quality product performance and good reputation, our products have been exported to mnay countries and regions in the world, including: Russia, Serbia, Australia, Mongolia, Indonesia, Bangladesh and other countries, the products are subject to a great welcome and praise.