80 Mesh Ceiling Borad PVC Pulverizer Machine For Pipe Film 500 KG/H

3700RPM 500 KG/H PVC Pulverizer Machine For Pipe Film Ceiling Borad

Application of high speed mill: The high-speed and high-efficiency pulverizer manufactured by Beisu Machinery is especially suitable for TPU, LLDPE, PVC, PE, PET, EVA, PP, PA, rubber, and various rigid, soft, elastomer, low-temperature materials, and film materials. , Sheet thermoplastic materials. According to the classification of the grinding materials, the mills are mainly divided into two categories: rotor (turbine) mills and disc mills.

The working principle of the high-speed mill: The high-speed rotation of the grinding disc driven by the main shaft of the plastic pulverizer collides with the fixed cutter disc, cutting the material into powder (without sieve). The ground fine powder is brought into the vibrating screen along with the circulating air of the blower for sorting. The coarse material falls back to regrind, and the qualified fine powder enters the finished product storage with the cyclone and is discharged through the powder outlet pipe. That is the finished product. The air is discharged from the dust collector.

Model	SMF400	SMF500	SMF600	SMF800
Motor Power	30 KW	45 KW	55 KW	75 kw
Capacity ( PVC )	100-150 kg/hr	200-250 kg/hr	250-300 kg/hr	300-400 kg/hr
Rotating Blades shaft speed	2200 RPM	2200 RPM	2200 RPM	2200 RPM
Cooling Type	Water Cooling	Water Cooling	Water Cooling	Water Cooling
Power size	60 – 80 mesh	60 – 80 mesh	60 – 80 mesh	60 – 80 mesh
Weight	1000 kg	1200 kg	1500 kg	1800 kg

PVC Pipe /Ceiling/ Board/ Films/ Sheets Pulverizer milling:

PE/PET/ABS/PA/TPE/LLDPE/EVA Puverizer:

The core patents of the high-speed pulverizer milling machine:

A1: Grinding chamber; Cutter head and grinding disc are air-cooled and water-cooled, especially suitable for processing thermoplastic materials;

A2: Transmission device of the pulverizer; Adopts European-style belt wheel, high-speed operation is not loose, and it is more convenient for daily maintenance;

A3: Pulverizer blade; PVC cutter head is made of wear-resistant steel material, special tooth shape design, double the service life; the frequency of use of the cutter head is determined according to the material, usually grinding to 400 tons needs to be replaced. (Depending on the blade wear condition); PE/PET/LDPE/ABS/EVA/PC/FIBER grinding disc adopts SKD-11; tungsten steel;stainless steel whole plate material, special tooth shape design, double service life; cutter head The frequency of use is determined according to the material, and usually the grinding powder to 400 tons needs to be replaced. (It depends on the wear of the blade);

A4: Mill knife adjustment system; Combined with German technology, taking into account the convenience of customers, the knife adjustment of the cutter needs to remove the movable cutter disc, add or subtract washers, and adjust the disc clearance to ensure that there is no abnormal noise; The adjustment knife is distributed outside the grinding disc. According to the thickness of different materials, the bolts outside the grinding disc are adjusted at the same time. After the nuts are locked, the gap between the four bolts can be ensured.

A5: Refueling device for the mill; especially an oil pump refueling device is added, which is convenient for users to refuel daily work without stopping the machine;

A6: The mill is externally exhausted; The air volume reaches 1704 m3/h, and most of the heat is taken away by the temperature difference between the inlet and outlet air. A small part of the heat is solved by water cooling.The inlet temperature of cold water is required to be no more than 25°C, and the outlet water temperature is no more than 45°C. In summer, the cooling tower can be used to circulate water to lower the temperature.

A7: Fully automatic, automatic feeding, discharging and sorting;

BEISU Machinery:

BEISU machinery and equipment recommendation: PVC/PE/PP pipe production line, PVC/PE wood plastic production line, PVC profile/profile production line, PVC/PP/PE/ABS sheet/sheet production line, PVC edge band production line and mill, High-speed mixer , crusher, sharpener, shredder, tractor, winder, cutting machine and other plastic auxiliary machinery.

BEISU Machinery is a technical manufacturing plant specializing in the manufacture of plastic recycling、granulation、 shredding、crushing, grinding and mixing. The main equipment includes plastic extruder, plastic granulator, plastic shredder, plastic crusher, plastic pulverizer, plastic mixing equipment, plastic feeding system and other plastic extrusion recycling production equipment. Provide complete turnkey projects for waste plastics, pipes, profiles, plates, wood-plastic, rotational molding, dip-molding, color masterbatch, rubber, aluminum-plastic and other applications.

At present, the "BEISU" machinery brand has covered the world such as Thailand, the United States, Saudi Arabia, Bangladesh, Pakistan, the United Kingdom, Chile, Poland, India, Mexico, Russia, Nepal and so on. 

Why choose BEISU Machinery:
A1: Plant construction, renovation plan, pipeline laying plan in the plant, construction plan of circulating cooling pool

A2: Supply of raw materials, transformers, air compressors and other procurement plans

A3: Provide relevant raw material specific formula, high quality raw material suppliers, raw material cost accounting

A4: Installation equipment, commissioning equipment, training staff, and provide technical support throughout the year

A5: BEISU company has a plastics industry engineering alliance nationwide, in the case of distance, can provide relevant talents in your company year-round work, as a technology backing