Product Details
Company Profile

Wire Crystal Head DC Motion Sensor Compact Size Remote Control Setting

Wire Crystal Head DC Motion Sensor Compact Size Remote Control Setting

Wire Crystal Head Compact Size Remote Control DC Sensor For Ceiling Light

Wiring diagram of DC sensor:

1. The wire color would be Null,Red +12VDC,Black -GND,Yellow 5V PWM/5VTTL

2. The output is 0-10V dimming

Detection area of DC sensor:

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-6m

Mounting height	2.5-6m/8.2-19.8ft (ceiling mounted)
Detection range	Max.ø14m/45.92ft (ceiling mounted)
Motion detection	0.5~1.5m/s
Detection angle	30°-150°(without the glass)

Dimmensions of DC Sensor:

1. The shell size is 51*24.4*14mm

2. White four-core wire,excluding terminal length 525mm.

Mechanical structure of DC sensor:

1. Connector:4 PIN wire crystal head
2. Installation hole:Two mounting holes for easy fixation in the lamps
3. Daylight sensor:Strain the light intensity, convert the light signal into electrical signal, control the switch of the lamp
4. Antenna module:Detect motion signals of objects.

5. Receive instructions from the remote control to set up parameters.

Technical date of DC sensor:

Operating voltage	12VDC
Operating current	30mA±5%
Output	5V PWM/5V TTL
Stand-by power	≤0.5W
Detection area	25%/50%/75%/100%
Hold time	5s/30s/1min/3min/5min/10min/20min/30min
Daylight threshold	2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable
Stand-by period	0s/10s/30s/1min/5min/10min/30min/+∞
Stand-by dimming level	10%/20%/30%/50%
Microwave frequency	5.8GHz±75MHz
Microwave power	<0.3mW
Operating temperature	-20°C~+55°C
IP rating	IP20
Warranty	5 years
Factory Default Setting: Detection area 100%/ Hold time 5s/ Daylight threshold Disable/Stand-by period 0s/Stand-by dimming level 10%.

Application:

1. Automatically ON/OFF function:

	With sufficient daylight,even when motion detected,light remains OFF.
	With insufficient daylight,when motion detected, light ON.
	After the last detection and the present hold time elapsed, light OFF.

2. No daylight function

When the daylight threshold is set to "Disable".

Light on when detect movement, After people leave, Light off after stand-by period.

Applications: Dim places such as Basement Parking, Underpass.

	When motion is detected, the sensor will switch on the light to 100% brighteness.
	After people leave the detection area, light remains 100% brightness within hold time.
	After the last detection and the present hold time elapsed, light OFF.

3. Function Demo - Dimmable control/Corridor function

	With sufficient daylight,even when motion detected,light remains OFF.
	With insufficient daylight,when motion detected, light ON.
	After last detection, the light will be dimmed down to the stand-by dimming level (10%,20%,30% or 50%) after holdtime.
	After the stand-by period, light OFF.

Features of ON/OFF Sensor:

1. Most popular DC sensor, especially for industrial lighting fixtures

2. With daylight function, offer one more option for customer except the motion sensor

3. Offer 6m mounting height, suitable for tri-proof light, linear light in warehouse, tunnel

4. HD03R/HD05R remote control, support any options needed

5. 30min hold time and +∞ stand-by period options offer the most proper mode for any applications

6. 10~ 50% stand-by dimming level offer flexible brightness needed

7.Two installation holes/rear clip-type way/double-face foam tape offer different installation method for the end-users

Installation Method of DC Sensor:

1. Microwave sensor can be installed in any lamp except the one with full metal shell.

2. The detected surface cannot be shielded by metal objects.

3. Make sure the microwave module is completely exposed outside.

4. The detection surface of the sensor module shall be installed facing the detection area.

5. Should be kept away from the driver to avoid interference generation and lamp flashing.

6. Wiring must be strictly in accordance with the wiring diagram to avoid short circuit.

HD01VR-1.pdf

Product Tags:

14m DC Motion Sensor

5V TTL DC Motion Sensor

14m DC Motion Detector

Wire Crystal Head DC Motion Sensor Compact Size Remote Control Setting

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen HAISEN Technology Co.,Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	DC Motion Sensor
Brand Name:	HAISEN
Model Number:	HD01VR-1
Certification:	CE RoHS
Place of Origin:	China
MOQ:	100PCS
Price:	Negotiable
Payment Terms:	L/C, T/T, Western Union
Supply Ability:	200,000pcs per month
Delivery Time:	1-3 days for sample order, 1-2 weeks for bulk order
Packaging Details:	bubble pack, paper flat, drying agent,outer carton.
Output:	5V PWM/5V TTL
Connector:	4pin crystel head
Size:	5124.414mm
Wire length:	Excluding terminal length 525mm
Motion detection:	0.5~1.5m/s
Hold time:	5s/30s/1min/3min/5min/10min/20min/30min
Stand-by period:	0s/10s/30s/1min/5min/10min/30min/+∞
Mounting height:	2.5-6m/8.2-19.8ft (ceiling mounted)