Large Span 18m Stud And Track Roll Forming Machine For Radome Building

Large Span Curving Roof Roll Forming Machine For Radome Building

Introduction Roll Forming Machine

1. All the rollers are forged from the high quality structural steel and are processed intensely.
2. The surfaces of the rollers are plated with hard chromium.
3. The rollers have a high hardness and long operating life.
4. The power set to automatically transport the colored steel sheet is equipped in the forming press section, which can press the colored steel sheet with the thickness of 0.6-1.6mm.
5. It is not needed to frequently adjust the clearance between the pressing rolls when pressing the sheet with different thickness. Which can make the sheet come out from machine is very simple.
6. But the quality of the finished product can be guaranteed.
7. The length of the finished sheet is measured by the electronic measurement instrument or mechanical measurement instrument.
8. The helping hand wheel and the counter are used in the adjustment of the bending of arch sheet, which makes the operation simple and guarantees the quality and the dimensional precision.
9. The hoisting tool is light and handy (The weight of hoisting tool of the United States is 30KG. And the weight of hoisting tool of our company is 2KG). It is convenient to install and uninstall the hoisting tool, its hoisting speed is quick.

Technical Parameters

1. Size: 9300mmx2270mmx2400mm.

2. Total Weight: About 12000kg.

3. Controlling System: PLC.

4. Forming Power: 7.5kw.

5. Bending Power: 4.0kw+1.1kw+1.1kw.

6. Cutting Power: 3.0kw.

7. Material of rollers: 45#steel, quenched HRC 58-62.

8. Material of roller shafts: 45#steel.

9. Material of cutting blade: Cr12 steel.

10. PLC Type: Siemens.

11. Step of rollers: 13 steps.

12. Feeding Width: 914mm.

13. Effective Width: 610mm.

14. Thickness of the coil: 0.6-1.6mm.

15. The depth of the groove: 203mm.

16. Working speed: Straightsheet: 15m/min.

17. Arch sheet: 13m/min.

18. Sewing: 10m/min.

19. Max span: 38m.

Applications of Large Span Curving Roof Roll Forming Machin

Our large span curving roof roll forming machine has beautiful appearance and high strength, and is widely used in the hangar, large warehouse, garage, workshop, swimming pool, showrooms, trade halls, markets, and other types of grain storage buildings.

Wuxi Hengruiyang Technology Co., Ltd is a manufacturer of roll forming machine. At present, our products have been exported all over the world, and maintained good cooperative relations with customers.