30m Swing Gate Operator 260W Remote Control 4G GSM Swing Gate Opener

Installation guide

PK400AC swing gate opener is applicable to single leaf gate weight less than 400kg, and length of the single leaf swing gate

should be less than 2.5m. The drive mode adopts the worm and worm gear to combine the pinion transmission. This gate opener

must be installed inside the enclosure or yard for protection.

Installation drawing for main engine

The two engines are respectively installed at both sides of the gate and the Figure 6 shows the installation relation between

the housing, main engine and mounting plate. The main engine at the left hand is taken as an example for detailed description

of installation method and can be a reference for the installation method of the right one.

Preparation work before installation

a) Before installing the door opener, please confirm the correct installation of the door to ensure that the door can be easily

manually operated. Dismantle the plastic cover on the main engine and mounting base plate before installation and keep the

relevant fasteners properly;

b) Install the electric lock, the distance between the door bottom and ground should be 40-50mm. If not install the electric lock,

the distance between door bottom and ground should be ≥20mm.

Cable

Please prepare the fasteners for connecting mounting plate and wall according to the installation environment, and the power

cable for main engine (the number of each single engine power supply cable core shall not be less than 4 PCS, the sectional

area of cable core shall not be lower than 1.5mm²), the limit switch cable for main engine (the number of each single engine

limit switch cable core shall not be less than 3 PCS, the sectional area of cable core shall not be less than 0.75mm²), the power

cable for control box (the number of cable core shall note be less than 3 PCS, the sectional area of cable core shall not be less

than 1.5mm²). The length is determined by the user of according to the situation in the installation site.

Note: The pipe outlet should be facing down to avoid rain water entering the pipe along the cable.

Mounting brackets fixation

In order to install the PK400AC main engines firmly, recommend to use the expansion screws to fix the mounting brackets.

FOR MORE DETAILS, PLEASE CLICK THE BELOW LINK TO DOWNLOAD THE USER MANUAL.

PK400AC user manual.pdf